ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Funtana 40 ?
10 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Sun Jan 15, 2006 8:23 am    Post subject: Funtana 40 ?  

Hey I just had a crashed funtana 40 given to me.The guy had bought it for a second plane and crashed it on the first flight. frown I have a question or two for the owners of the plane, I just mounted a Saito 82 on it.( I hope this will be enough?)

Were did yall put your CG?
Did you use the stock tank? The tank is missing.
What about the amount of throws?

Thx
Shaun

_________________
http://www.texomarc.org/
Back to top  
Batix Kid



Joined: 07 Apr 2005
Posts: 90

PostPosted: Sun Jan 15, 2006 11:40 am    Post subject:  

The funtana is a great little plane,ive just retired mine now but it also had a saito 82 in it and it was perfect.
Im not sure what you mean but stock tank but i think mine had an 11oz tank,i got about 7mins 3d flying out of it.
CG,not sure it was about 1/3 down the wing from the leading edge.
Throws,as much as possible big grin

hope this helps
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Sun Jan 15, 2006 5:43 pm    Post subject:  

I think the stock one is 11 oz. I was hoping to be able to get one larger then the 11oz inside. I just don't know if it will fit.
_________________
http://www.texomarc.org/
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Sun Jan 15, 2006 6:00 pm    Post subject:  

Hey Shaun, You'll love the .82 in it. I liked the APC 14x6 better than my 15x4W, but either way it will pull out of the most stupid moves as long as it's pointed up Confused The recomended C.G. is 5 5/16" to 5 11/16" behind the leading edge at the fuse. You can go farther back but this plane gets squirrely quick so take it slow. The Throws are:

Aielron Low Rate 3/4" up 5/8" down High Rate 2 1/8" up 1 7/8" down
Elevator 7/8" up 7/8" down 2 5/8" up 2 5/8" down
Rudder 2" left 2" right 3 7/8" left 3 7/8" right


Make sure you put brass tubes over the front dowels on the wing or the vibration will shear them of, seriously! Also, go into the archives and read the threads on the Funtana .40, there's some good stuff in those posts. One more thing, use expo on the 3D rates, it's out of control. It should fly alot like you F90 though. I hope this helps. BTW the stock tank gives you plenty of run time with it, You rarely run it open, more like 1/3 throttle usually. Jay

_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Mon Jan 16, 2006 4:00 pm    Post subject:  

Thanks Jay
That's the info I needed. I stole the tank off the Katana for the time being.The cg ended up behind the range about a inch. I'll add a couple weights for the first flight and take it from there.I'll go look for the old f40 forums now Thanks again.

_________________
http://www.texomarc.org/
Back to top  
Modellpilot



Joined: 04 Feb 2006
Posts: 7

PostPosted: Tue Feb 07, 2006 1:43 am    Post subject:  

Hi,
i have a Funtan 40 V3 from www.eurolight.aero !
She fly with a 15ccm two takter Motor very great .

This Model is very good for beginners, and experts.

www.bello1.de
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Tue Feb 07, 2006 6:29 pm    Post subject:  

Yea I flew mine the other day. Good flying 40 size plane. The Saito 82 is a great combo but I ended up having to put 6oz up front frown. The only thing I didn't like was it didn't want to do Knife Edge. I have 3004 servos in there now. I'm thinking there just isn't enough torque?
_________________
http://www.texomarc.org/
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Tue Feb 07, 2006 8:57 pm    Post subject:  

The fuse on the funtana is just not tall enough for knife edge. I had an 8411 on my rudder and it still didnt knife edge.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Modellpilot



Joined: 04 Feb 2006
Posts: 7

PostPosted: Tue Feb 07, 2006 11:18 pm    Post subject:  

HI,
i have on all ruders a ds 8411
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Wed Feb 08, 2006 7:47 am    Post subject:  

Zak's right. Mine would knife edge at full throttle but wouldn't cimb. Also in a hover the rudder didn't have enough authority to put it back upright if you got off either left or right. I had high torque metal gears JR's.
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive