ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Diablo 3D - 85% Mini
10 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
Azryl



Joined: 10 Oct 2005
Posts: 8

PostPosted: Fri Jan 13, 2006 3:59 pm    Post subject: Diablo 3D - 85% Mini  

Hello. Just wanted to show everyone my Diablo made to 85% from the 3Dbatix plans. Awesome plane!! My first own built foamie

32 inch wingspan
11.7oz / 334g weight
BM2410-08Y brushless
1047 GWS propeller
18amp TP ESC
3x RCsport RS-04 8g servos
Feigao 6ch rx
1000mAh ELEmodel 20c 3s Lipo

The foam is from the local art supply store. 5mm thick with paper on each side. Makes taping hinges a do it right first time affair!

The covering is childrens book contact, 1.5meter rolls for around $1.25 in many assorted colours which you can cut to any pattern, sticks well but more importantly comes off again if you need to realign etc

Have had a few flights now, has good vertical and harriers well but I'm not very capable with hover. Model flies well and does everything I needed from a first foamie project. Thanx 3dBatix



Diablo_mini_08.jpg
 Description:
 Filesize:  218.02 KB
 Viewed:  422 Time(s)

Diablo_mini_08.jpg



Diablo_mini_09.jpg
 Description:
 Filesize:  182.14 KB
 Viewed:  422 Time(s)

Diablo_mini_09.jpg



Diablo_mini_06.jpg
 Description:
 Filesize:  183.04 KB
 Viewed:  422 Time(s)

Diablo_mini_06.jpg



Diablo_mini_05.jpg
 Description:
 Filesize:  173.87 KB
 Viewed:  422 Time(s)

Diablo_mini_05.jpg


Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Fri Jan 13, 2006 4:00 pm    Post subject:  

nice...

The graphics are cool.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Fri Jan 13, 2006 6:36 pm    Post subject:  

Well done big grin
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
torking16



Joined: 09 Feb 2006
Posts: 10

PostPosted: Thu Feb 09, 2006 1:38 pm    Post subject:  

awsome, I made one at 85% too but mine is like 28 inches on adobe pdf.
It's a nice flying bird have fun
Back to top  
boolat



Joined: 29 Nov 2005
Posts: 19

PostPosted: Thu Feb 09, 2006 2:23 pm    Post subject:  

I have print the pdf has 95%

here the result









3 mm depron indoor! 75gr without electronics!

eek
Back to top  
Coop



Joined: 02 May 2005
Posts: 26

PostPosted: Sun Feb 12, 2006 10:21 am    Post subject:  

Azryl where did you get the graphics from and what is it again?
Back to top  
Azryl



Joined: 10 Oct 2005
Posts: 8

PostPosted: Sun Feb 12, 2006 7:58 pm    Post subject: Childrens book contact  

I got the rolls from the local news agents, its just coloured contact for books! Its available in a huge range of colours, has a paper backing on the bottom, self adhesive colour film on the top. You just cut to shape, awesome stuff for foamies. I just make templates for the design out of stiff cardboard, mark the contact and cut with a model knife. Make mirror images out of the contact colour for each side of the plane. Works well I believe smile

In Australia, news agents and any place that sells childrens school books, binders and loose paper should also carry this product.

The product is "Duraseal self adhesive covering" made in New Zealand and available in solid colours, tinted colours which have neat show thru effects, and metallics! I now have all tint and solid colours as well as metallic blue, red, green, chrome, bronze and gold!

1000mm by 450mm rolls at approx $2 depending on colour

Awesome smile
Back to top  
Coop



Joined: 02 May 2005
Posts: 26

PostPosted: Sun Feb 12, 2006 8:17 pm    Post subject:  

Ahhh now I see. I thought you were in the USA. Well I doubt we have that here.
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Tue Feb 14, 2006 10:23 am    Post subject:  

Cool planes bros! I made one 75% and am having trouble with the power system. Either I use 2S & its too weak, or I use 3S and its too heavy. What are the stats on the motors you're using? I'd like to compare so I can plan the next plane better. Thanks!
_________________
how do you want to fly?
Back to top  
Azryl



Joined: 10 Oct 2005
Posts: 8

PostPosted: Tue Feb 14, 2006 2:07 pm    Post subject: BM2410-08Y brushless  

I'm using a cheap chinese made BM2410-08Y brushless. Its heavy at around 56grams, 1260kv for approx 12amp draw using GWS RS1047 propeller.

Has enough power to hover and gives good vertical performance. Its punch out from hover isnt very powerful tho

Cost $13.95 Australian so I'm not complaining smile
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive