ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Hangar-9 Super Stick as a traner?
9 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Tue Nov 22, 2005 1:56 pm    Post subject: Hangar-9 Super Stick as a traner?  

Dear fellows I have had a traner from Hagar-9 the Solo Star. Just about a week ago I crashed this airplane during a landing. This airplane is very good in the air, and stable, but the landing gear are very flimsy so during a landing it started to bounce and since the runway was poorly paved it fliped sideways. Because of this flip it hit the ground and the fire wall broke away. The airplane is imossible to fix. So I want to get a new airplane that is easy to fly but still a little ahead of a trainer. Is the Super Stick right for me?



Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Tue Nov 22, 2005 5:42 pm    Post subject:  

That is indeed a good second airplane. It is going to be faster, but still easy to fly. Hope you like it.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Robert300L



Joined: 17 Apr 2004
Posts: 134
Location: San Diego, CA

PostPosted: Tue Nov 22, 2005 5:51 pm    Post subject:  

If you were confident with your trainer, the Super Stick is perfect for you. It looks like you'll need one extra servo and a Y-harness to make it work with the equipment you put in the trainer. You could even go with the Ultra Stick 40.
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Tue Nov 22, 2005 8:17 pm    Post subject:  

I agree. Get the Super/Ultra Stick for a second airplane, but if all that happened to your trainer was that your firewall broke out, that is a very easy fix. If it came out in one piece, just epoxy it back in place; if it is splintered, just cut out a new one (out of plywood) and epoxy it in place. Heck, my dad and I have pulled a few planes out of trash cans at the field that were torn up real bad and were able to put them in the air again.
_________________
Lower??!!
Back to top  
Robert300L



Joined: 17 Apr 2004
Posts: 134
Location: San Diego, CA

PostPosted: Wed Nov 23, 2005 12:15 am    Post subject:  

It could be he wants an excuse for a next plane too wink
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Wed Nov 23, 2005 9:59 am    Post subject:  

3D-kid330 wrote:
I agree. Get the Super/Ultra Stick for a second airplane, but if all that happened to your trainer was that your firewall broke out, that is a very easy fix. If it came out in one piece, just epoxy it back in place; if it is splintered, just cut out a new one (out of plywood) and epoxy it in place. Heck, my dad and I have pulled a few planes out of trash cans at the field that were torn up real bad and were able to put them in the air again.


Yah I know it's fixable but it didn't come out in one piece. When it ripped out it damaged the fuselage walls badly. There is another problem it's soaked in fuel because of the crash.


Funtanafunflyer
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Wed Nov 23, 2005 10:01 am    Post subject:  

Robert300L wrote:
If you were confident with your trainer, the Super Stick is perfect for you. It looks like you'll need one extra servo and a Y-harness to make it work with the equipment you put in the trainer. You could even go with the Ultra Stick 40.


What is a Y- harness?


Funtanafunflyer
Back to top  
Robert300L



Joined: 17 Apr 2004
Posts: 134
Location: San Diego, CA

PostPosted: Wed Nov 23, 2005 3:17 pm    Post subject:  

Y-harness

It allows you to connect 2 servos together on one channel. You need it because the Super Stick and Ultra Stick use 2 servos in the wing, one per aileron.

Be sure and check out the manual for whichever Stick you decide to get. There are links for them on the left of the picture on horizon's site.
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Thu Nov 24, 2005 2:54 pm    Post subject:  

Robert300L wrote:
Y-harness

It allows you to connect 2 servos together on one channel. You need it because the Super Stick and Ultra Stick use 2 servos in the wing, one per aileron.

Be sure and check out the manual for whichever Stick you decide to get. There are links for them on the left of the picture on horizon's site.


Thank you very much for the info.

Funtanafunflyer
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive