ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

need help with my himaxx
3 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
maverick



Joined: 13 Jun 2005
Posts: 38
Location: raleigh NC

PostPosted: Sun Nov 06, 2005 6:07 am    Post subject: need help with my himaxx  

guy i was flying my little foamy when it took a spill in the ground
i thought the prop had jusst broke but when i went to go get it it turns out the motor shaft had broken off.i need to know if it is fixable and if it is where can it be fixed thanks.

_________________
I dont suffer from insanity.I enjoy every minute of it.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Sun Nov 13, 2005 10:36 pm    Post subject:  

Himax sells shafts for about 3 bucks. There is set screw and wheel collar. Take them both out and press the shaft out (its not easy!) If you have a vice, i would make sure its well supported and tap the shaft out.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
maverick



Joined: 13 Jun 2005
Posts: 38
Location: raleigh NC

PostPosted: Mon Nov 14, 2005 10:20 am    Post subject:  

thanks man i ran to the apex rc hobbies and bought a shaft for like 3 bucks.it was actually pretty easy getting the shaft out.thanks for the help.
_________________
I dont suffer from insanity.I enjoy every minute of it.
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive