ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Is a Funtana .40 by hangar-9 a good second plane
30 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Fri Nov 04, 2005 10:49 am    Post subject: Is a Funtana .40 by hangar-9 a good second plane  

Dear fellows,
I was planing to buy a Funtana .40 by hangar-9 and I wonderd is this a good second plane. I have a JR radio and standard servos and an engine by MDS .40. Is this plane stable and easy to fly? Hows the landings? Will this plane be able to do any 3D


Thank you for any help,
Funtanafunflyer






Here's a video of Zak flying it.



hanger9 funtanas .40.jpg
 Description:
 Filesize:  13.21 KB
 Viewed:  670 Time(s)

hanger9 funtanas .40.jpg




Last edited by funtanafunflyer on Mon Nov 21, 2005 5:02 pm; edited 2 times in total
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Fri Nov 04, 2005 5:02 pm    Post subject:  

This is a great flying plane Very Happy You will be able to fly it as a sport model with a .40 but you'll need at least a .50 or more to hover comfortably. You might want to keep it on the low rates for awhile untill you get use to it and use expo for the high rates. You won't be disapointed by any means. Check all the past forums on the Funtana .40 for some extra tips. Also Zak has some great video on this sight you might want to see Cool If your on dial-up, they're worth waiting for! BTW it lands beautifully, just let it settle don't fair to hard 'cause it floats.
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Fri Nov 04, 2005 5:09 pm    Post subject:  

Radioflyer wrote:
This is a great flying plane Very Happy You will be able to fly it as a sport model with a .40 but you'll need at least a .50 or more to hover comfortably. You might want to keep it on the low rates for awhile untill you get use to it and use expo for the high rates. You won't be disapointed by any means. Check all the past forums on the Funtana .40 for some extra tips. Also Zak has some great video on this sight you might want to see Cool If your on dial-up, they're worth waiting for! BTW it lands beautifully, just let it settle don't fair to hard 'cause it floats.



Thank you very much for your reply. It is very helpful. smile Very Happy Very Happy


Funtanafunflyer
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Fri Nov 04, 2005 5:31 pm    Post subject: Re: Is a Funtana .40 by hangar-9 a good second plane  

funtanafunflyer wrote:
Dear fellows,
I was planing to buy a Funtana .40 by hangar-9 and I wonderd is this a good second plane. I have a JR radio and standard servos and an engine by MDS .40. Is this plane stable and easy to fly? Hows the landings? Will this plane be able to do any 3D


Thank you for any help,
Funtanafunflyer


Indeed the FT40 (Funtana 40) is a great flyer, but I am not exactly sure it is a good 2nd plane. I would honestly recommend a Ultra Stick 40 or a Four Star 40. Both planes are also available in a 60 class craft also. The FT40 could be used, but I would only recommend that if you have master ever aspect of flying. I would say a FT40 would be a better 3rd plane. The MDS .40 will fly the plane, but don't expect a lot of performance with that motor. I own a Funtana, Stick and a Four Star, so this is from personal experience and I am an experienced flyer.

Here is Zak's FT40 video: http://www.3dbatix.com/videos/funtana.wmv

Here is the Four Star 40 in Red, but available in yellow also.
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXFKA9&P=7



Here is the Ultra Stick 40 in Red and White, but available in Yellow and White
http://www.horizonhobby.com/Shop/ByCategory/Product/Default.aspx?ProdID=HAN1690


_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Fri Nov 04, 2005 5:41 pm    Post subject: Re: Is a Funtana .40 by hangar-9 a good second plane  

Thank you very much for your reply I greatly appreciate it. I will also consider the other models you suggested.
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Fri Nov 04, 2005 7:05 pm    Post subject:  

I'm sure it would be a fine second plane, if your a proficient pilot, a Derrick said. I had a funtana 90 as my second plane, it flew awesome. Now, because you are looking for a 40 size 3d plane, I would look at profiles. I highly reccomend the burrito from http://swanyshouse.com/burrito/burrito.html It is from what I have heard The EASIEST plane to learn 3d with. It is very tough as well. The only problem is that it is a kit. But if you are willing to build, it will be worth it's weight in gold. cool Profiles are the kings of the 40 size class. Another plane you might consider, is the powerline hobbies edge 540. It is very similar to the funtana, but superior in flight. Somebody here has a build thread on it. But with the engine you have, it is on the smaller end, so you will be able to do most 3d stuff great, except for hovering. It will just have a little less power in case you want to do full throttle climb outs, or you get in an "oh ####" situation. Good luck with whatever you choose.

Eric

_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Fri Nov 04, 2005 9:17 pm    Post subject:  

fly boy 1 wrote:
I'm sure it would be a fine second plane, if your a proficient pilot, a Derrick said. I had a funtana 90 as my second plane, it flew awesome. Now, because you are looking for a 40 size 3d plane, I would look at profiles. I highly reccomend the burrito from http://swanyshouse.com/burrito/burrito.html It is from what I have heard The EASIEST plane to learn 3d with. It is very tough as well. The only problem is that it is a kit. But if you are willing to build, it will be worth it's weight in gold. cool Profiles are the kings of the 40 size class. Another plane you might consider, is the powerline hobbies edge 540. It is very similar to the funtana, but superior in flight. Somebody here has a build thread on it. But with the engine you have, it is on the smaller end, so you will be able to do most 3d stuff great, except for hovering. It will just have a little less power in case you want to do full throttle climb outs, or you get in an "oh ####" situation. Good luck with whatever you choose.

Eric



Dear Eric thank you very mcuh for your time and effort. I did take a look at the burrito and I'm considering it.


Funtanafunflyer
Back to top  
jebrando



Joined: 23 Nov 2004
Posts: 5

PostPosted: Sat Nov 05, 2005 4:49 am    Post subject:  

Does anyone know if this FT40 would fly well with a Thunder Tiger Pro .60 ?!
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Sat Nov 05, 2005 9:25 am    Post subject:  

funtanafunflyer,
The Funtana 40 is probably one of the best .40 size planes out there IMO. This plane rocks for it's size!
This plane will 3D like crazy. I had a Magnum .91 four stroke in mine. It fly's more "realistic" than planes like UCD's and profiles. Just about the only thing mine wouldn't do very well is harrier. Could of been my CG though.
Plane has MAJOR ailerons, slows to a crawl, and is pretty light. Can't ask for much more than that.

As far as running a .60 in it,, i don't really know. My .91 prob wieghs just a tad more than your .60, but i'd much rather have the .91 four stroke. Longer flight times, and better for 3D.

Hope it works out for you!
Good luck!
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Sat Nov 05, 2005 9:30 am    Post subject:  

craigman wrote:
funtanafunflyer,
The Funtana 40 is probably one of the best .40 size planes out there IMO. This plane rocks for it's size!
This plane will 3D like crazy. I had a Magnum .91 four stroke in mine. It fly's more "realistic" than planes like UCD's and profiles. Just about the only thing mine wouldn't do very well is harrier. Could of been my CG though.
Plane has MAJOR ailerons, slows to a crawl, and is pretty light. Can't ask for much more than that.

As far as running a .60 in it,, i don't really know. My .91 prob wieghs just a tad more than your .60, but i'd much rather have the .91 four stroke. Longer flight times, and better for 3D.

Hope it works out for you!
Good luck!



Wow, this is great info thank you very much. By the way do you mind telling me how it lands. Does it land smoothley and slowley?


Funtanafunflyer
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Sat Nov 05, 2005 9:41 am    Post subject:  

As far as landing, it lands pretty slow. Won't land as slow as something like a UCD, or profile, do to the fun flys have a lot of wing area.
But the Funtana will definately land pretty slow. Especially compared to the Four Star, and Stick planes.
The Funtana has a pretty light airframe. That's what really helps in major 3D and slow landings.

The only real bad habbit this plane has is it will tip stall under a hard harrier move. Mostley do to the major elevator throws. So just a bump of the throttle and it usually smooths out.

Just can beat this plane for all out thrashing! I dorked mine a couple of weeks ago, but i'm definately gonna rebuild it. I bought a H9 Twist to replace it, and what a mistake! That plane SUCKS compared to the Funtana!
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Sat Nov 05, 2005 9:46 am    Post subject:  

craigman wrote:
As far as landing, it lands pretty slow. Won't land as slow as something like a UCD, or profile, do to the fun flys have a lot of wing area.
But the Funtana will definately land pretty slow. Especially compared to the Four Star, and Stick planes.
The Funtana has a pretty light airframe. That's what really helps in major 3D and slow landings.

The only real bad habbit this plane has is it will tip stall under a hard harrier move. Mostley do to the major elevator throws. So just a bump of the throttle and it usually smooths out.

Just can beat this plane for all out thrashing! I dorked mine a couple of weeks ago, but i'm definately gonna rebuild it. I bought a H9 Twist to replace it, and what a mistake! That plane SUCKS compared to the Funtana!



Thank you for your time and effort I'm probably going to get a Funtana.


Funtanafunflyer
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Sat Nov 05, 2005 10:10 am    Post subject:  

Funtanafunflyer,
no problem! That's what these forums are all about!
Any other questions,, just shoot them my way!
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Sat Nov 05, 2005 10:13 am    Post subject:  

craigman wrote:
Funtanafunflyer,
no problem! That's what these forums are all about!
Any other questions,, just shoot them my way!


Thank you very much for your help and support. smile smile smile Very Happy


Funtanafunflyer
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Sat Nov 05, 2005 12:52 pm    Post subject:  

jebrando wrote:
Does anyone know if this FT40 would fly well with a Thunder Tiger Pro .60 ?!


I wouldn't use it. It's alot of added weight for not a huge increase in power, I'm refering to the TG .61 pro not sure about a .60.

_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
craigman



Joined: 31 May 2004
Posts: 105
Location: Redding, CA

PostPosted: Sat Nov 05, 2005 2:14 pm    Post subject:  

Ya, i agree with radioflyer...
if it's anything like my Magnum .61, it's a heavy slug.
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Sat Nov 05, 2005 6:17 pm    Post subject:  

Radioflyer wrote:
jebrando wrote:
Does anyone know if this FT40 would fly well with a Thunder Tiger Pro .60 ?!


I wouldn't use it. It's alot of added weight for not a huge increase in power, I'm refering to the TG .61 pro not sure about a .60.


Dear Radioflyer, which engine would you recomend for me to fly this model comfortabley and be able to do most 3D? I have an MDS .40.
Back to top  
mikey



Joined: 28 Nov 2004
Posts: 109
Location: Greenville, TX

PostPosted: Sat Nov 05, 2005 6:35 pm    Post subject:  

What is your budget? Its all about how much money you have.
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Sat Nov 05, 2005 6:52 pm    Post subject:  

mikey wrote:
What is your budget? Its all about how much money you have.


My budget is limited I can spend a maximum of 200$ but what would you recomend
Back to top  
mikey



Joined: 28 Nov 2004
Posts: 109
Location: Greenville, TX

PostPosted: Sat Nov 05, 2005 7:29 pm    Post subject:  

The YS 63FZ-S it is plenty of power for the funtana not quite as much as the saito 91 but is cost less. You can find it for around $230. What is great about the engine uses a pressurized system were as the saito does not. This will allow you to put the tank on the cg. So save a few extra bucks and get the ys.
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Sun Nov 06, 2005 7:07 am    Post subject:  

I have a friend that could hover his with a O.S. 50 SX but it didn't have a ton of pull-out power. That's about $175. I flew mine with a Saito .82 and it was a rocket in the verticle. That's about $275. I always wondered how this plane would fly on a TG .46 PRO with a 12.25x3.75. TG .46 PRO is about $80
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Sun Nov 06, 2005 5:44 pm    Post subject:  

Thanks guys this a lot of great info.


Funtanafunflyer
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Mon Nov 07, 2005 6:35 am    Post subject:  

Man.......... I have a homeless Saito 82 right now. I just can't make my mind up Sad . The funtana 40 sounds like a pretty sound choice for learning 3-d?
_________________
http://www.texomarc.org/
Back to top  
Flyerdude



Joined: 27 Aug 2004
Posts: 11
Location: Washington Twp , New Jersey

PostPosted: Sat Nov 12, 2005 2:23 pm    Post subject:  

I have a funtana 40 with a os .91 and it has enough verticle to go to the moon!!!

i had put an os .46ax in in origionally, but wasnt quite enough power. (would hover, but at almost full throttle.)

so if all you have is a .46 i would say go for it, but i would highly recommend a .91 fourstroke.
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Mon Nov 21, 2005 4:53 pm    Post subject:  

Flyerdude wrote:
I have a funtana 40 with a os .91 and it has enough verticle to go to the moon!!!

i had put an os .46ax in in origionally, but wasnt quite enough power. (would hover, but at almost full throttle.)

so if all you have is a .46 i would say go for it, but i would highly recommend a .91 fourstroke.


What is the best manufacturer? Is saito good? Saito .91 Very Happy
Back to top  
Flyerdude



Joined: 27 Aug 2004
Posts: 11
Location: Washington Twp , New Jersey

PostPosted: Wed Nov 23, 2005 10:03 am    Post subject:  

Saito's are good, strong and light. I have the 1.80. I used the os .91 because thats what i had sitting on the bench. But yes saito would be a good choise.
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Wed Nov 23, 2005 3:06 pm    Post subject:  

Flyerdude wrote:
Saito's are good, strong and light. I have the 1.80. I used the os .91 because thats what i had sitting on the bench. But yes saito would be a good choise.



I like Saito too. There is just one problem, they are expensive. So I want to get a two stroke that will work good for this plane. I allready have and MDS .40. This is the link to the Saito .91

Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 344
Location: Kalamazoo, MI

PostPosted: Wed Nov 23, 2005 5:35 pm    Post subject:  

If you want to do 3D get a O.S. .50 SX. This will hover it but not a rocket. Sport fly it with your .40, but don't expect any verticle power. It will fly very nicely though with your .40 Smile
_________________
God bless us all, and keep us safe.


www.bryanhusk.com/jay
Back to top  
BentOnFlyingRC



Joined: 13 Nov 2004
Posts: 6
Location: stansburry park ut

PostPosted: Thu Nov 24, 2005 8:08 am    Post subject:  

fellas
i hate to be the bad apple of the bunch...but a funtana is not a good 2nd plane. even if you slow the rates down to fly like a trainer it tip stalls bad and one missed approach and you will be rebuilding if not getting a new funtana. its an awsome 3rd or 4th plane but no way would i recomend it as a 2nd plane. i myself own the 40 sized funtana although i consider myself an experience pilot i even get the approach speed wrong from time to time. someone suggested earlier an ultra stick 40. thats the way to go...it flies like a trainer and as you get better and increase the throws in the control surfaces its a a fantastic plane to start learning 3d on. you gotta learn to crawl before you can 3d and the mds 40 would be a good fit for the ultrastick
i had a saito 72 in myfutana at sea level and that was an awesome setup i'm sure with an 82 it would have been better..then i moved to 4700 feet in altitude and the 72 wasnt enough so i had to park it..i had on my bench a magnum 52 two stroke and a macs muffler so i stuck that in my funtana with a 12.25x3.75 apc prop and i love it...the 52 with the muffler is lighter that the saito setup and i have more power than ever hovers at just above 1/2 throttle and has awesome pullout power...only reason i mention this is if you are budget minded the magnum52 is 90 bucks and the macs muffler is another 40 so for roughly 130 bucks you have a serious power plant to put into a 40 sized funtana when you are ready for it...remember...YOU GOTTA LEARN TO CRAWL BEFORE YOU CAN 3D
Back to top  
funtanafunflyer



Joined: 04 Nov 2005
Posts: 26
Location: San Francisco, California

PostPosted: Thu Nov 24, 2005 3:01 pm    Post subject:  

BentOnFlyingRC wrote:
fellas
i hate to be the bad apple of the bunch...but a funtana is not a good 2nd plane. even if you slow the rates down to fly like a trainer it tip stalls bad and one missed approach and you will be rebuilding if not getting a new funtana. its an awsome 3rd or 4th plane but no way would i recomend it as a 2nd plane. i myself own the 40 sized funtana although i consider myself an experience pilot i even get the approach speed wrong from time to time. someone suggested earlier an ultra stick 40. thats the way to go...it flies like a trainer and as you get better and increase the throws in the control surfaces its a a fantastic plane to start learning 3d on. you gotta learn to crawl before you can 3d and the mds 40 would be a good fit for the ultrastick
i had a saito 72 in myfutana at sea level and that was an awesome setup i'm sure with an 82 it would have been better..then i moved to 4700 feet in altitude and the 72 wasnt enough so i had to park it..i had on my bench a magnum 52 two stroke and a macs muffler so i stuck that in my funtana with a 12.25x3.75 apc prop and i love it...the 52 with the muffler is lighter that the saito setup and i have more power than ever hovers at just above 1/2 throttle and has awesome pullout power...only reason i mention this is if you are budget minded the magnum52 is 90 bucks and the macs muffler is another 40 so for roughly 130 bucks you have a serious power plant to put into a 40 sized funtana when you are ready for it...remember...YOU GOTTA LEARN TO CRAWL BEFORE YOU CAN 3D


Thank you this info. I like your idea, I'm going to get a Super Stick.


Funtanafunflyer
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive