| |
| Author |
Message |
pabmadi
Joined: 25 Mar 2005 Posts: 13
|
Posted: Fri Sep 30, 2005 11:41 am Post subject: Balsa Product Motor for $18.95 |
|
|
Some one tried this motor???
http://www.balsapr.com/catalog/motors/BPBrushlessView.asp?ProductId=U422859
thank's |
|
| Back to top |
|
 |
maverick
Joined: 13 Jun 2005 Posts: 38 Location: raleigh NC
|
Posted: Fri Sep 30, 2005 11:50 am Post subject: |
|
|
i saw a ikarus extra 300 with one.man did it fly! _________________ I dont suffer from insanity.I enjoy every minute of it. |
|
| Back to top |
|
 |
bnrusso
Joined: 05 Oct 2005 Posts: 2 Location: Fox Lake, IL and Kingman,AZ
|
Posted: Wed Oct 05, 2005 9:44 pm Post subject: |
|
|
Hi,
I got 4 of these motors from 2 different sources on e-bay. 2 Shipped from HongKong for $34 total
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=6002806651
and 2 with a 18Amp esc from planet_tronick for $45.99 ea. shipped
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=5999968948
I put one in the Ultrafly Outrage 3-D http://www.rcgroups.com/links/index.php?id=4856
that I got from a friend that originally had a himax 2812-850.
It flies great. I use a 1500MA 15C 3Sli-poly and get 20 min flights.
The 2 from HK needed a little alignment tweaking to minimize vibration without a prop. The shaft was not bent but the magnet housing center hole was not perfectly centered. I used a dremel tool with a stone slightly smaller than the center hole to nick the low side and reassembled after cleaning and re-lubeing the bearings. I also had to re-touch the wires with polyurethane glue to secure them from vibration. I've got over 30 flights on this one and cleaned the bearings twice. They also go under the name of BM2048-21. Considering the cost of the 2812-850 of $63 without a brushless ESC they are FANTASTIC. _________________ Being retired is just like being a kid again. More time than money, I hope! |
|
| Back to top |
|
 |
| |