ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

JR servos---Futaba receiver
4 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Joedaniwhite



Joined: 15 Jan 2005
Posts: 44
Location: Millbury, MA

PostPosted: Sun Sep 25, 2005 2:34 pm    Post subject: JR servos---Futaba receiver  

Will JR servos (527's) work with my R127DF Futaba receiver? If not, can I switch some pins around in the connectors?

I'm trying to help a kid out and teach him how to fly. His receiver went south and I want to give him my old 6EXA Futaba radio and R127DF receiver. His plane is full of JR servos though. Figured I'd aske before letting the smoke out! Ha Ha ha!!

Joe

_________________
The dumb thumb King!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Sep 25, 2005 4:28 pm    Post subject:  

yes, they will. all you have to do is match up white to orange(signal), red to red(posative), and black to brown(negative). think of the colors Futaba uses and the colors that JR uses. the lightest color is signal, the darkest is negative , and will be on the opposite side. hope this clears things up
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Mon Sep 26, 2005 4:50 am    Post subject: Re: JR servos---Futaba receiver  

Joedaniwhite wrote:
Will JR servos (527's) work with my R127DF Futaba receiver? If not, can I switch some pins around in the connectors?

I'm trying to help a kid out and teach him how to fly. His receiver went south and I want to give him my old 6EXA Futaba radio and R127DF receiver. His plane is full of JR servos though. Figured I'd aske before letting the smoke out! Ha Ha ha!!

Joe


Yep, it will work. I have used the same exact setup on a trainer before.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Joedaniwhite



Joined: 15 Jan 2005
Posts: 44
Location: Millbury, MA

PostPosted: Mon Sep 26, 2005 11:23 am    Post subject: futaba/JR  

Thanks a bunch guys! I'll give it a whirl... Looks like all the colors match up correctly in the connector

Brown is where black is
red is where red is
orange is where the white is

Joe

_________________
The dumb thumb King!
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive