| |
| Author |
Message |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Mon Sep 05, 2005 8:12 pm Post subject: Funtana 90 |
|
|
This is my new funtana I just finshed. It flys great.
YS 110
5 - JR9411
1 - JR811
fromco regulator
thunder power 1900 lipoly
| Description: |
|
| Filesize: |
58.88 KB |
| Viewed: |
735 Time(s) |

|
| Description: |
|
| Filesize: |
71.68 KB |
| Viewed: |
735 Time(s) |

|
| Description: |
|
| Filesize: |
76.53 KB |
| Viewed: |
735 Time(s) |

|
|
|
| Back to top |
|
 |
john wondra

Joined: 05 May 2004 Posts: 360 Location: auburn, wa
|
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 460 Location: Danville, VA
|
Posted: Tue Sep 06, 2005 5:34 am Post subject: |
|
|
Looks great...
You'll love it.
Post a maiden flight report.
_________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Tue Sep 06, 2005 9:45 am Post subject: |
|
|
| Two Reasons I used the lipoly one is the amp draw the thunderpower 1900 can do 19 amps contunusly were as the fromeco 2400 can only do 4 amps contunusley. This means on my current set up I would be pushing the pack around max output. Which in return means heat and when you get the packs hot it reduces there lifespane. Were as the thunderpower does not even get warm because it is no were near its max output. The second reason is that the lipoly is a little lighter.
|
|
| Back to top |
|
 |
Radioflyer

Joined: 14 Sep 2004 Posts: 344 Location: Kalamazoo, MI
|
Posted: Tue Sep 06, 2005 6:11 pm Post subject: |
|
|
Nice plane and beautiful shop That's emaculate. I'd hate to post pics of my shop, I have four planes that I'm working on right now and it keeps it quite cluttered
_________________ God bless us all, and keep us safe.
www.bryanhusk.com/jay |
|
| Back to top |
|
 |
john wondra

Joined: 05 May 2004 Posts: 360 Location: auburn, wa
|
Posted: Tue Sep 06, 2005 7:25 pm Post subject: |
|
|
K thanks, thats what i figured. Makes sence.
| mikey wrote: | | Two Reasons I used the lipoly one is the amp draw the thunderpower 1900 can do 19 amps contunusly were as the fromeco 2400 can only do 4 amps contunusley. This means on my current set up I would be pushing the pack around max output. Which in return means heat and when you get the packs hot it reduces there lifespane. Were as the thunderpower does not even get warm because it is no were near its max output. The second reason is that the lipoly is a little lighter. |
_________________ John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs> |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Tue Sep 06, 2005 9:54 pm Post subject: |
|
|
Sorry
Last edited by mikey on Tue Sep 06, 2005 9:59 pm; edited 1 time in total |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Tue Sep 06, 2005 9:58 pm Post subject: |
|
|
| Quote: | | [quote="mikey"]Nice plane and beautiful shop That's emaculate. I'd hate to post pics of my shop, I have four planes that I'm working on right now and it keeps it quite cluttered |
Thank you it is hard to keep clean when you get focused on working sometimes I just have to stop and clean.
|
|
| Back to top |
|
 |
Ramz

Joined: 05 Nov 2004 Posts: 55 Location: New Brunswick, Canada
|
Posted: Wed Sep 07, 2005 7:42 pm Post subject: F90 |
|
|
Hello Mikey. Congrats on the F90. Lookin great and it'll fly even better however i would suggest a few mods before you take it to the field. I'll list the mods i did to my F90. After i did these mods, it flew 100% better.
1) Since your using the YS110FZ, which is an awesome choice, you might wanna try an APC 16x6 prop on atleast 20/20 fuel. I fly mine on 10% cool power right now and it's not peppy enough for real 3D however it will hover. Just got a case of 25% XP that should do the trick. Not sure what you've got on it for a prop but I found that a 16x6 works great.
2) For balance, don't go with the recommended 7 1/4" as it will be borderline uncontrollable and extremely pitch sensitive. In order to get the proper CG for neutral upright and inverted flight, I had to install the battery pack on the left side of the motorbox (6V, 2000mah NiMH), move the rudder servo forward and use a pull pull system and move the throttle servo forward by approx 6" which would put it right over the landing gear mount. This put the CG exactly where it should be as it will hold inverted flight with almost no down elevator. It's not a big job to do however it will greatly pay off.
3) If your gonna move the throttle servo, or even if you decide not to, it would be a good idea to take advantage of the YS pressurized fuel system and move the tank just behind the wing tube on the CG. It'll make the plane fly more neutral during the entire flight. Their's all kinds of room to do this.
4) Your gonna have to add a few washers on the left hand side of the motor mount (looking from the front) between the motor mount and the firewall to give it a bit more right thrust. I used 2 medium sized washers and it's just about perfect.
5) Take some 620 high temp, high strength Loctite and use it on your exhaust mainfold and your muffler, sparingly. I can guarantee you that it will fall off if you do not. Don't use the blue or the red stuff as it will not hold up to the heat and vibrations. The 620 stuff is green and it's about 20$/bottle however if will save you from halving to buy and wait for another muffler. I tried mine 3 times without the loctite and all 3 times, it came loose, but didn't fall off.
If you choose to maiden your plane this way, i can guarantee that you won't like it and it will be tail heavy. Of course the easy way out would be to add a bunch of weight up at the firewall however this would really hurt the planes performance as it needs to stay light to perform....and perform it will!
|
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 460 Location: Danville, VA
|
Posted: Thu Sep 08, 2005 6:19 am Post subject: Re: F90 |
|
|
| Ramz wrote: | Hello Mikey. Congrats on the F90. Lookin great and it'll fly even better however i would suggest a few mods before you take it to the field. I'll list the mods i did to my F90. After i did these mods, it flew 100% better.
1) Since your using the YS110FZ, which is an awesome choice, you might wanna try an APC 16x6 prop on atleast 20/20 fuel. I fly mine on 10% cool power right now and it's not peppy enough for real 3D however it will hover. Just got a case of 25% XP that should do the trick. Not sure what you've got on it for a prop but I found that a 16x6 works great.
2) For balance, don't go with the recommended 7 1/4" as it will be borderline uncontrollable and extremely pitch sensitive. In order to get the proper CG for neutral upright and inverted flight, I had to install the battery pack on the left side of the motorbox (6V, 2000mah NiMH), move the rudder servo forward and use a pull pull system and move the throttle servo forward by approx 6" which would put it right over the landing gear mount. This put the CG exactly where it should be as it will hold inverted flight with almost no down elevator. It's not a big job to do however it will greatly pay off.
3) If your gonna move the throttle servo, or even if you decide not to, it would be a good idea to take advantage of the YS pressurized fuel system and move the tank just behind the wing tube on the CG. It'll make the plane fly more neutral during the entire flight. Their's all kinds of room to do this.
4) Your gonna have to add a few washers on the left hand side of the motor mount (looking from the front) between the motor mount and the firewall to give it a bit more right thrust. I used 2 medium sized washers and it's just about perfect.
5) Take some 620 high temp, high strength Loctite and use it on your exhaust mainfold and your muffler, sparingly. I can guarantee you that it will fall off if you do not. Don't use the blue or the red stuff as it will not hold up to the heat and vibrations. The 620 stuff is green and it's about 20$/bottle however if will save you from halving to buy and wait for another muffler. I tried mine 3 times without the loctite and all 3 times, it came loose, but didn't fall off.
If you choose to maiden your plane this way, i can guarantee that you won't like it and it will be tail heavy. Of course the easy way out would be to add a bunch of weight up at the firewall however this would really hurt the planes performance as it needs to stay light to perform....and perform it will! |
1) I agree, the 16x6 is a great combo. I may try a 17x6 also.
2) I think that depends on the person. My CG is slightly pass 7-1/2".
3) Having the tank on the CG is always better, but not manditory. My tank is still in front of the wing tube and tracks very well. Moving the tank behind the tube makes it more difficult to attach wing bolts.
4) I added more right thrust and a little up thrust also.
5) My stock muffler never came lose, but the stock pipe broke in half while on the ground which is why I bought an aftermarket pipe which I like better and it sounds even better. More like a Harley.
6) I do recommend also to start with a CG in the 6-1/2" range until you get use to the plane. It flys big to me.
7) I also advise to pin the firewall with that motor. The 1.10FZ is comparable to a Saito 150 and I have seen firewall pull apart on this plane.
Lastly, I clipped on the wings also for extra insurance.
Please view my construction page for more info.
_________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Fri Sep 09, 2005 6:50 pm Post subject: |
|
|
| Thanks guys for all the input. I have about ten flights on it I started with cg at 7 3/4 for the maden flight it was fine the snaps were great and it would wall like i have never seen it was very pitch sensitive. I have been playing around with it I like 7 1/2 the best it gives me the best of both worlds. I am running a 16/6 apc the ys 110 is a great motor. The fuel I am running is 20/20 powermaster I have been thinking about 30/20 I am little woried about putting extra strain on the motor it runs so good almost hate to change anything. Waiting to hear from some people that have ran 30/20 for a little while to see if there is any side effects. Today the muffler did come lose so I will put it back on with loctite. DTB I went trough your build tread before I ever started it was a help. I pinned the engine firewall with carbon fiber. I also painted the firewall black as you did. When I hover it I have to hold alot of up elavator to keep it vertical so I an going to add some washers on the motor mount. It also needs right thrust. It does not like to knife edge it pulls hard did you guys have to do any mixing? Hopeing the thrust adjustments will take care of this. I am think about moving the tank to the cg. Again thanks for all the help.
|
|
| Back to top |
|
 |
Ramz

Joined: 05 Nov 2004 Posts: 55 Location: New Brunswick, Canada
|
Posted: Sat Sep 10, 2005 4:21 pm Post subject: ke |
|
|
| The F90 is notoriously crappy at knife edge. It'll do it, but it doesn't have much authority. All you can do is max out the rudder throw and put a good solid servo on it.
|
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Sat Sep 10, 2005 5:40 pm Post subject: |
|
|
| Did you use any mixing to get it to knife edge without pulling?
|
|
| Back to top |
|
 |
DTB

Joined: 24 Jul 2004 Posts: 460 Location: Danville, VA
|
Posted: Mon Sep 12, 2005 6:05 am Post subject: |
|
|
| mikey wrote: | | Thanks guys for all the input. I have about ten flights on it I started with cg at 7 3/4 for the maden flight it was fine the snaps were great and it would wall like i have never seen it was very pitch sensitive. I have been playing around with it I like 7 1/2 the best it gives me the best of both worlds. I am running a 16/6 apc the ys 110 is a great motor. The fuel I am running is 20/20 powermaster I have been thinking about 30/20 I am little woried about putting extra strain on the motor it runs so good almost hate to change anything. Waiting to hear from some people that have ran 30/20 for a little while to see if there is any side effects. Today the muffler did come lose so I will put it back on with loctite. DTB I went trough your build tread before I ever started it was a help. I pinned the engine firewall with carbon fiber. I also painted the firewall black as you did. When I hover it I have to hold alot of up elavator to keep it vertical so I an going to add some washers on the motor mount. It also needs right thrust. It does not like to knife edge it pulls hard did you guys have to do any mixing? Hopeing the thrust adjustments will take care of this. I am think about moving the tank to the cg. Again thanks for all the help. |
I run 30% strictly in my YS 1.10FZ and it absolutely loves it. The idle is smoother also. My FT90 does a very nice knife edge. It couples toward the gear slightly, but nothing that can't be corrected with a little up elevator. I have knife edge passed 2-3 ft off the deck and it does great. I added some up thrust and right thrust which probably helped out the tracking also. I have no mixing programmed.
_________________ Fly it hard and hover it low...
My RC Photo Page |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Mon Sep 12, 2005 5:00 pm Post subject: |
|
|
| I am doing the trust adjustment and will fly it this week I will give a report on how it works out.
|
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Tue Sep 20, 2005 6:33 pm Post subject: |
|
|
| Finally found some time to fly tonight. It worked real well I have enough right thrust I am going to go with one more warsher of up thrust it is still is takeing a lot of up eleavtor to hold it in a hover this will make three washers. The knife edge was drastically improved I think it will get even better once I add a washer. I did my first tail touch with it tonight it flys great! |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
Posted: Tue Sep 20, 2005 11:50 pm Post subject: Re: ke |
|
|
| Ramz wrote: | | The F90 is notoriously crappy at knife edge. It'll do it, but it doesn't have much authority. All you can do is max out the rudder throw and put a good solid servo on it. |
I found my F90 to knife 100 times better than my F40. It didnt have authority so to speak ( knife edge loops were hard) but it did it well. _________________ Zak West
www.DesertAircraft.com
www.Smart-Fly.com
www.DarrolCady.com
www.CoolRunningUSA.com
www.TanicPacks.com |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Wed Sep 21, 2005 8:09 pm Post subject: |
|
|
| Well I put three washers for up thrust on it and it still pulls hard to the bottom any ideas. Should I use some coupling??? |
|
| Back to top |
|
 |
| |