ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Covering a Giant Scale Plane
8 posts
 
   3DBatix Forum Index -> Workshop
 
Author Message
sethslasher



Joined: 23 Oct 2004
Posts: 105
Location: Ohio

PostPosted: Fri Apr 01, 2005 7:07 am    Post subject: Covering a Giant Scale Plane  

i am new to the giant scale scene and was wondering how you cover a giant scale plane
do you lay the trim on top of other trim, or do you lay all trim on the wood?
thx guys

_________________
Push yourself; it's just an airplane!
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Apr 01, 2005 7:47 am    Post subject:  

You can put the trim over the base covering, that would be the quickest way. If you do trim over wood, yould have to precut the base covering too into shape.
_________________
--Meyrick--
Back to top  
sethslasher



Joined: 23 Oct 2004
Posts: 105
Location: Ohio

PostPosted: Fri Apr 01, 2005 3:53 pm    Post subject:  

which is best for a better/cleaner look?
_________________
Push yourself; it's just an airplane!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Fri Apr 01, 2005 4:11 pm    Post subject:  

i say put the trim on over the covering only because if you dont like the scheme you made, you can peel it off without changing the base color. it also looks cleaner because you cant see where the base stops and the trim starts.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Apr 01, 2005 6:14 pm    Post subject:  

Yeah you see less overlapping when you put the trim on top of covering.
_________________
--Meyrick--
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 147
Location: North Carolina

PostPosted: Fri Apr 01, 2005 7:31 pm    Post subject:  

Then again, you get a better adhesion from wood to covering contact as opposed to covering to covering. Also, if you have to shrink the base color alot and apply a darker color over it, there will be more wrinkles that are succeptable to forming whenever you leave it in high heat, since the darker colors are going to attract more heat. Whichever way you choose to go, I don't guess there can be a "wrong" way. Good luck with it your project!
_________________
Ryan
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 147
Location: North Carolina

PostPosted: Fri Apr 01, 2005 7:34 pm    Post subject:  

Also, I forgot to add, you need to ensure that you have a good overlap, maybe 1/4" or so if you are somewhat new to covering if you do decide to apply using the method Meyrick reccomended. This is to ensure that you will get enough overlap in case you made a mis-measurement, and also in case you get a little to carried away and do suck your covering in.
_________________
Ryan
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sat Apr 02, 2005 8:04 am    Post subject:  

MAKE SURE YOU HAVE THE IRON ON LOW HEAT!!!
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
 
   3DBatix Forum Index -> Workshop All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive