| |
| Author |
Message |
El Diablo
Joined: 10 Jan 2005 Posts: 46
|
Posted: Wed Mar 30, 2005 9:26 pm Post subject: Flight modes vs. high/low rates |
|
|
Do any of you guys fly with flight modes as opposed to high/low rates? I have the 9C and use rate switches and I don't fully understand flight modes. I would like a set-up where I don't have to flip so many switches and I don't like flying on high rates all the time. I'd like for some of you guys to post you basic radio programs to give me some ideas. I would really like to see Zak, Meyrick, and Kyle's. _________________ If you aint crashin'... you aint pushin' the envelope. |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
Posted: Wed Mar 30, 2005 9:38 pm Post subject: |
|
|
Dual rates are switches for each surface. They are usually very simple, and only adjust the travel and the expo. Flight modes have ALL programs under one switch. On the 9Zs, you can change anything, and have it located on one switch. I like to have 2-3 flight modes. One for IMAC, one for Mid Rates, and one for full 3D Rates. In my IMAC mode, i have dual rates and different expos so that i can fly the sequences better. I believe that the 9C will do SOME of this. I am relatively sure that you can combine all your dual rates on to one switch. That way you can have pretty much 2 flight modes. _________________ Zak West
www.DesertAircraft.com
www.Smart-Fly.com
www.DarrolCady.com
www.CoolRunningUSA.com
www.TanicPacks.com |
|
| Back to top |
|
 |
GUE
Joined: 14 Aug 2004 Posts: 45 Location: Moedling, AUSTRIA
|
Posted: Thu Mar 31, 2005 2:41 am Post subject: |
|
|
Hi
U can use 3 flighmodes in the 9z
I Use the triple Position switch to switch the modes on my 9C
it's very Easy just define the switch, put the switch in the position and adjust DR/EXP
thats all to do...
cu
GUE _________________ cu
GUE |
|
| Back to top |
|
 |
El Diablo
Joined: 10 Jan 2005 Posts: 46
|
Posted: Thu Mar 31, 2005 1:06 pm Post subject: |
|
|
I understand dual rates and how to set them and assign switches on my 9C. What I'm trying to understand is how to program a flight mode set-up on the 9C (if it's even possible). I have been told that the JR 9303 uses flight modes but I don't know anyone that owns one, and the guys that I know that use the 9C don't know as much about it as I do. They all told me that they were experts on this radio, but I can get the same result in half the programming as them. It took me about 3 hours to understand it better than them. The main reason I'm looking into this that my brother is building a new F90 and needs a new radio, and I want to make sure if the 9303 is a better choice for him that I steer him that way. I also think I might be missing a whole other method of using the 9C. _________________ If you aint crashin'... you aint pushin' the envelope. |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Thu Mar 31, 2005 6:47 pm Post subject: |
|
|
My 9303 will do most everything that a 9Z or a 10X will do, including the flight modes.  _________________ Lower??!! |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Thu Mar 31, 2005 6:55 pm Post subject: |
|
|
| 3D-kid330 wrote: | My 9303 will do most everything that a 9Z or a 10X will do, including the flight modes.  |
Brandon please!!!! Don't turn this into another JR vs. Futaba thread...  _________________ --Meyrick-- |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Thu Mar 31, 2005 8:12 pm Post subject: |
|
|
Not trying to hijack, but El Diablo was wondering what would be best for his friend. It really is just personal preference, so go with either one. They are all good.  _________________ Lower??!! |
|
| Back to top |
|
 |
El Diablo
Joined: 10 Jan 2005 Posts: 46
|
Posted: Fri Apr 01, 2005 1:21 am Post subject: |
|
|
I'm looking more to see if the 9303 truly does flight modes and how they work. I don't understand how they work the switch priorities. Do you have just 1 switch for flight modes, and if so what do you need all those other switches for? I can find uses for all of the 9C switches but i really don't need them on this plane. With flight modes do you have a mode switch and seperate D/R switches that override the mode switch? If any of you guys fly with modes, please explain your basic set-up. I don't need to know about mixes for K/E, or Spoil/Flapperons, just the basic set-up that you would start a new plane with. My real problem is that until I get an idea of how they are set-up I can't properly formulate the real penetrating questions to see if one way is better than the other. If I sound a little frustrated, I am. I appreciate all you guys input, but JR and Futaba do a very poor job of promoting their differences other than "It's a (insert name here) therefor it's the greatest thing since sliced bread so you should buy it. I won't even comment on the catalogs, oh sorry I meant to say "magazines". 175 pages 5 articles, 2 pages of letters to the editor, a few misc. photo's, 163 pages of advertising and 2 subscription cards, thats right all that for a mere $6. How's that for a rant. You guy's can rate the rant if you want. _________________ If you aint crashin'... you aint pushin' the envelope. |
|
| Back to top |
|
 |
xtraflyr

Joined: 10 Sep 2005 Posts: 28 Location: Chester NJ
|
Posted: Mon Oct 10, 2005 3:44 pm Post subject: |
|
|
hey there,
I just got a 9303. With the flight modes you can use the first mode for IMAC flying,FM2 for a high rate and FM3 for your 3D rates. You only need to flick one switch instead of 3. Some prefer and only need low and high rate,therefore only need to use the switches.. You can set your rates and expo on each Flight mode. On my dads H9 Twist we use the differnt FM's and you just flick the one switch and VOILA the 3 channels change their rate and their expo!! I'mnot sure what else to say(believe it or not) about the Flight Modes..
Also if you can use FM1 for take off FM2 for flying and FM3 for landing,like geardown flaps down,offset elevator to compensate for the down flap posistion.
Later
Frank _________________ REAL PLANES HAVE A ROUND COWL AND a MONOWING!!!
1/3 Lanier Laser200,Brison 4.2 JR 8103, Hitecs
QQ YAK OS160 JR 8103, Hitecs
Midwest Cap 80" DA50 JR 8103,Hitecs
Funtana 90s YS 120sf, JR 9303 PCM,Hitecs |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Mon Oct 10, 2005 10:01 pm Post subject: |
|
|
Thats basically how I set my Edge up on the 9303. I think it's a lot easier than flipping a whole bunch of switches every time you want to change rates.
No brand wars intended, 10x, 9C, 9Z, 9303, whatever, it's all good.  _________________ Lower??!! |
|
| Back to top |
|
 |
GUE
Joined: 14 Aug 2004 Posts: 45 Location: Moedling, AUSTRIA
|
Posted: Tue Oct 11, 2005 9:57 pm Post subject: easy flight modes |
|
|
there are fligt modes on my T14MZ tooo
cu
GUE _________________ cu
GUE |
|
| Back to top |
|
 |
xtraflyr

Joined: 10 Sep 2005 Posts: 28 Location: Chester NJ
|
Posted: Wed Oct 12, 2005 11:54 am Post subject: |
|
|
Lets see,$2000 or $500 for flight modes  _________________ REAL PLANES HAVE A ROUND COWL AND a MONOWING!!!
1/3 Lanier Laser200,Brison 4.2 JR 8103, Hitecs
QQ YAK OS160 JR 8103, Hitecs
Midwest Cap 80" DA50 JR 8103,Hitecs
Funtana 90s YS 120sf, JR 9303 PCM,Hitecs |
|
| Back to top |
|
 |
mikey
Joined: 28 Nov 2004 Posts: 109 Location: Greenville, TX
|
Posted: Sat Oct 15, 2005 7:44 pm Post subject: |
|
|
I have a 9303 also if you need any help setting up the flight modes and the rates let me know I will help you the best that I can. Also I would recomend the 955 receiver with spcm. I have never been hit with any interference with that receiver can't say the same for my other receiver's.
http://www.jrradios.com/Products/Default.aspx?ProdID=JRPR955** |
|
| Back to top |
|
 |
| |