ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Important update on JR8611 servo top case
7 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Tue Mar 29, 2005 6:23 pm    Post subject: Important update on JR8611 servo top case  

JR announces upgrade to 8611 case top
The 8611 is widely known as the favorite high performance servo for its unmatched digital precision, 260 oz/in of torque, and refined, rugged metal alloy gear train.

To handle the loads imposed on the gear train, the original case top featured bushing supports for all gear pins.

We’ve become aware however, that certain excessive momentary loads (like those imposed by flutter or the accidental bumping of a surface) may cause the bushing to break loose in the case top and result in excessive play in the servo’s output arm.

Retrofit of damaged case tops is simple: Horizon Service Center will either replace any flyer’s 8611 servo case tops when returned for service or will supply the owner with a replacement case top free of charge.

For further assistance, please contact our product support department at 877-504-0233 or return your 8611 servo/s to:

Horizon Service Center
Attn: JR 8611 Case Top Upgrade
4105 Fieldstone Road
Champaign, IL 61822



old8611.jpg
 Description:
 Filesize:  83.68 KB
 Viewed:  154 Time(s)

old8611.jpg



new8611.jpg
 Description:
 Filesize:  51 KB
 Viewed:  154 Time(s)

new8611.jpg



_________________
--Meyrick--
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Mar 29, 2005 8:19 pm    Post subject:  

aww man! thanks for that meyrick! im gonna ask them about that tomorow. i dont want my servos bustin up.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 147
Location: North Carolina

PostPosted: Tue Mar 29, 2005 9:31 pm    Post subject:  

QUICK!!!

EVERYONE BASH JR SINCE THEY ARE OBVIOUSLY A COMPANY THAT PRODUCES UNDERENGINEERED GARBAGE!!!

Not saying that ya'll were talking junk or anything.

_________________
Ryan
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Tue Mar 29, 2005 9:34 pm    Post subject:  

I love these servos. I already switched my cases... It was a pain in the a$$ cause they were already installed in the plane. It took about 4 hours to do 6 of them. I left the 3 on the rudder tray for now cause I got lazy.
_________________
--Meyrick--
Back to top  
Robert300L



Joined: 17 Apr 2004
Posts: 134
Location: San Diego, CA

PostPosted: Tue Mar 29, 2005 9:36 pm    Post subject:  

JR sux...



cept not cause it's good that they eat it and actually fix their problems.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Tue Mar 29, 2005 10:34 pm    Post subject:  

Meyrick wrote:
cause I got lazy.


thats typical.. Rolling Eyes






laughing

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Tue Mar 29, 2005 10:59 pm    Post subject:  

laughing
_________________
Lower??!!
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive