ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Weight and motor?
13 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
pabmadi



Joined: 25 Mar 2005
Posts: 13

PostPosted: Fri Mar 25, 2005 4:09 pm    Post subject: Weight and motor?  

I'm from Argentina. Here whe don't have Depron, so I found another thing that i thnik is similar.... I have a doubt... what is the Weight of the airframe with out any electronic component? I want to know if my "depron" is similar to the original Depron...
Another question.... What is the best choice of these motors :

http://www.lightflightrc.com/HTML/motorsListFRAMEhimax.htm

Thank's and sorry for my poor english... Embarassed



DSC01652.jpg
 Description:
Diablo
 Filesize:  46.83 KB
 Viewed:  479 Time(s)

DSC01652.jpg


Back to top  
DTB



Joined: 24 Jul 2004
Posts: 449
Location: Jackson, MS

PostPosted: Fri Mar 25, 2005 6:11 pm    Post subject:  

I can't remember exactly, but I think it was 8-10 oz with nothing on board. Depron and glue only.

Mine with everything RTF weighs 13.5 oz.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1312
Location: Fremont, CA

PostPosted: Fri Mar 25, 2005 11:17 pm    Post subject: Re: Weight and motor?  

pabmadi wrote:


Another question.... What is the best choice of these motors :



This is the motor to get from your selection.
http://www.lightflightrc.com/HTML/products/Maxx2812-0850.htm

_________________
--Meyrick--
Back to top  
pabmadi



Joined: 25 Mar 2005
Posts: 13

PostPosted: Sat Mar 26, 2005 5:23 am    Post subject: Re: Weight and motor?  

Meyrick wrote:
pabmadi wrote:


Another question.... What is the best choice of these motors :



This is the motor to get from your selection.
http://www.lightflightrc.com/HTML/products/Maxx2812-0850.htm


Thank's a lot....
What is the diference between the The Himax :0650/0850 and 1080??

This batterie is ok?
http://www.lightflightrc.com/HTML/products/PQ-880-3S.htm

Thank's
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1046
Location: Belvidere, NJ

PostPosted: Sat Mar 26, 2005 5:57 am    Post subject:  

the only iddefence is the k/v or how many rpms the motor will turn per volt is run through it. i wouldnt use that battery, i would get the "1320 2S TP"
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 449
Location: Jackson, MS

PostPosted: Sat Mar 26, 2005 4:03 pm    Post subject:  

Butthead wrote:
the only iddefence is the k/v or how many rpms the motor will turn per volt is run through it. i wouldnt use that battery, i would get the "1320 2S TP"


Don't you mean the 3S? 11.1V... That is what I run with the 2812-0850 on my Diable and is plenty powerful.

pabmadi wrote:
Meyrick wrote:
pabmadi wrote:


Another question.... What is the best choice of these motors :



This is the motor to get from your selection.
http://www.lightflightrc.com/HTML/products/Maxx2812-0850.htm


Thank's a lot....
What is the diference between the The Himax :0650/0850 and 1080??

This batterie is ok?
http://www.lightflightrc.com/HTML/products/PQ-880-3S.htm

Thank's


The 0850 has more torque than the 1080 but still turns faster rpm than the 0650. Good medium balance motor for flying.

_________________
Fly it hard and hover it low...

My RC Photo Page


Last edited by DTB on Sat Mar 26, 2005 4:44 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1312
Location: Fremont, CA

PostPosted: Sat Mar 26, 2005 4:42 pm    Post subject:  

Yes, you definitely need a 3 cell 11.1v battery. A 2 cell will barely hover it.
_________________
--Meyrick--
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 145
Location: North Carolina

PostPosted: Sat Mar 26, 2005 7:44 pm    Post subject:  

Su ingles es mejor que la mayoridad de la gente en este pais!
_________________
Ryan
Back to top  
pabmadi



Joined: 25 Mar 2005
Posts: 13

PostPosted: Sun Mar 27, 2005 8:55 am    Post subject:  

ryan wrote:
Su ingles es mejor que la mayoridad de la gente en este pais!


Gracias!! laughing
Back to top  
pabmadi



Joined: 25 Mar 2005
Posts: 13

PostPosted: Sun Mar 27, 2005 8:59 am    Post subject:  

Meyrick wrote:
Yes, you definitely need a 3 cell 11.1v battery. A 2 cell will barely hover it.


Ok... so 3 cell 11v...
Any mAh mininimun? The mAh determines the flight time, and other thing?

Thamk's a lot!!
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 449
Location: Jackson, MS

PostPosted: Sun Mar 27, 2005 9:04 am    Post subject:  

pabmadi wrote:
Meyrick wrote:
Yes, you definitely need a 3 cell 11.1v battery. A 2 cell will barely hover it.


Ok... so 3 cell 11v...
Any mAh mininimun? The mAh determines the flight time, and other thing?

Thamk's a lot!!


IMO, 1100 would be the bare minimum I would go. I use 1320 and 1500 mAh packs.

mAh will determine how long you fly. No other factor. That is your capacity like the size of a fish tank. 10gal or 100 gal. Capacity of charge available for use. The more you have the longer you fly, but the larger the capacity, the more weight you will have. It is a trade off.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
pabmadi



Joined: 25 Mar 2005
Posts: 13

PostPosted: Tue Mar 29, 2005 11:21 am    Post subject:  

The motor AXI 2212/34 is comparable to Himax2812 - 0850 in trust??

Himax2812 - 0850 is ok for Diablo 3D and for the bipe FOAMe IIx??

Thank's again!!!
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1312
Location: Fremont, CA

PostPosted: Tue Mar 29, 2005 12:00 pm    Post subject:  

The Himax motor will work with those foamies.
_________________
--Meyrick--
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive