ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

YS 110!
12 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
paulaly



Joined: 16 Feb 2005
Posts: 36

PostPosted: Tue Mar 08, 2005 1:28 pm    Post subject: YS 110!  

hey guys I am about to get the YS 110 and am looking for some answers.
What does everybody use for after run on this engine as I was told by a guy that the seals wear out if you use normal after run oil. He told me to use a synthetic oil. Is this true? Also do these engines have a long lifespan because they are a high performance engine and pump out amazing power. I thought that I would ask here because there is alot of people with very useful info and I could use and have used it. Question

Thanks
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Mar 08, 2005 1:41 pm    Post subject:  

even in my saitos and os's i never used after run oil. nothing seems to be wrong with them.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
paulaly



Joined: 16 Feb 2005
Posts: 36

PostPosted: Tue Mar 08, 2005 1:44 pm    Post subject:  

What did you use if you didn't use after run?
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Tue Mar 08, 2005 1:48 pm    Post subject:  

nothing, i just ran it lean out of fuel at the end of the season. it isnt neccessary.
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Tue Mar 08, 2005 5:47 pm    Post subject:  

Actually you should run the fuel out every day. Just pump it out dry, then start it untill it dies.
And after run can be pretty nasty towards some engines.
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Tue Mar 08, 2005 6:09 pm    Post subject:  

Some will eat up the seals, be careful and see if it will eat stuff like that. But we use it to keep our engines from rusting solid, as you can't usually get every last bit of fuel from the engine.
_________________
Lower??!!
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 147
Location: North Carolina

PostPosted: Tue Mar 08, 2005 7:24 pm    Post subject:  

I have one.

I use Morgan Coolpower 25% heli blend. I don't use any after run oil, and it does fine.

_________________
Ryan
Back to top  
paulaly



Joined: 16 Feb 2005
Posts: 36

PostPosted: Tue Mar 08, 2005 8:14 pm    Post subject:  

Thanks for the info because I did not know that about after run it is only since the other day when a guy told me. I have always used after run as a rule. I always drain the fuel out till dry and start the engine till all the fuel has gone then give it a good after run oil. I am a firm believer of looking after my engines and so far I have never had a bad engine or one that runs poorly. What can I use instead? I was also told that Morgan fuel has an additive in the mix that is a type of after run kind of like a 2 in 1. What about WD40? This is a good oil although I have never put it in my engine's insides just the moving parts outside.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Tue Mar 08, 2005 10:13 pm    Post subject:  

On my Saito 100 I always put 2oz. of after run oil in the crank's vent tube and I put my plane on its nose for 5 minutes so the oil soaks the front bearing. I've been doing that for more than a year now and I have yet to replace my bearings since I started doing that. YS requires a special after run oil as they have sensitive o-rings. You can get that oil from Central hobbies.
_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 460
Location: Danville, VA

PostPosted: Wed Mar 09, 2005 10:48 am    Post subject:  

I don't use after run oil in my YS 1.10FZ or my YS .91FZ. Both are just as strong as they were when I purchased them. Run them dry and you will be fine. I do use after run oil in my Saito and OS engines though.
_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
ryan



Joined: 13 Dec 2004
Posts: 147
Location: North Carolina

PostPosted: Wed Mar 09, 2005 9:19 pm    Post subject:  

Alot of my pattern buddies have been running YS's for nearly 10 years, some even longer than that and I have never seen them use it, nor have they mentioned it. These were 1.40 L's and DZ's that they are running.
_________________
Ryan
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Thu Mar 10, 2005 12:22 am    Post subject:  

only use it if its going to be sitting longer than a month for bearing sake....if your gunna fly it in the next few weeks just burn teh fuel out till it dies and call it good, thats my oppinion anyway
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive