ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

New 3DBatix "FOAMe IIx" foamie plans and pics.
60 of 206 posts archived
 
   3DBatix Forum Index -> Foamies
 
Author Message
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun Feb 20, 2005 11:18 pm    Post subject: New 3DBatix "FOAMe IIx" foamie plans and pics.  

Plans online for download. Airplane is designed and owned by Steve Gibson

http://www.3dbatix.com/plans.htm



foame2x-1.jpg
 Description:
 Filesize:  71.05 KB
 Viewed:  4999 Time(s)

foame2x-1.jpg



foame2x-2.jpg
 Description:
 Filesize:  70.69 KB
 Viewed:  4999 Time(s)

foame2x-2.jpg



foame2x-3.jpg
 Description:
 Filesize:  70.62 KB
 Viewed:  4999 Time(s)

foame2x-3.jpg



foame2x-4.jpg
 Description:
 Filesize:  70.05 KB
 Viewed:  4999 Time(s)

foame2x-4.jpg



_________________
--Meyrick--


Last edited by Meyrick on Sun Feb 20, 2005 11:20 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun Feb 20, 2005 11:18 pm    Post subject:  

One last pic.


foame2x-5.jpg
 Description:
 Filesize:  60.13 KB
 Viewed:  4998 Time(s)

foame2x-5.jpg



_________________
--Meyrick--
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Feb 20, 2005 11:21 pm    Post subject:  

this sint ment to be insulting at all but did you model it after the 3d foamy tiburon bipe?
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun Feb 20, 2005 11:25 pm    Post subject:  

john wondra wrote:
this sint ment to be insulting at all but did you model it after the 3d foamy tiburon bipe?


No way... The Foame II first generation plans was 8 months out before the POS Tiburon came out. We were joking that CHIP copied our design. This generation is just an X fuse version of the first.

And I'm sorry, the Tiburon is not as nice as this one and design is totally different. I've flown the Tiburon and it's a PILE.

_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun Feb 20, 2005 11:28 pm    Post subject:  

Meyrick wrote:
john wondra wrote:
this sint ment to be insulting at all but did you model it after the 3d foamy tiburon bipe?


No way... The Foame II first generation plans was 8 months out before the POS Tiburon came out. We were joking that CHIP copied our design. This generation is just an X fuse version of the first.

And I'm sorry, the Tiburon is not as nice as this one and design is totally different. I've flown the Tiburon and it's a PILE.


Ooops, I was thinking about the Raptor. What's a Tiburon?

_________________
--Meyrick--
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Feb 20, 2005 11:30 pm    Post subject:  

its the 3D foamy bipe, looks strikingly similar....tiburon has been out for months... il see if i can find some pictures
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Feb 20, 2005 11:34 pm    Post subject:  

here is teh only pict i can find teh 3d foamy site is temporarily down


tiburon bipe.jpg
 Description:
 Filesize:  48.82 KB
 Viewed:  4981 Time(s)

tiburon bipe.jpg



_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun Feb 20, 2005 11:36 pm    Post subject:  

john wondra wrote:
its the 3D foamy bipe, looks strikingly similar....tiburon has been out for months... il see if i can find some pictures


Foame II has been out since July 2004. Check out this thread.
http://www.flyingcirkus.com/forum/tm.asp?m=5510

_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun Feb 20, 2005 11:37 pm    Post subject:  

john wondra wrote:
here is teh only pict i can find teh 3d foamy site is temporarily down


Bro, that doesn't even come close. That thing looks like a freakin fish... Come on now.... LOL....

_________________
--Meyrick--
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Feb 20, 2005 11:40 pm    Post subject:  

im not say who was first blah blah blah blah blah, but your looks like a tiburon just squared off. all i asked was if you modeled it after this, not ment to be an aqusation.
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Sun Feb 20, 2005 11:43 pm    Post subject:  

john wondra wrote:
im not say who was first blah blah blah blah blah, but your looks like a tiburon just squared off. all i asked was if you modeled it after this, not ment to be an aqusation.


No, it was modeled after the Foame II first generation. I know you weren't accusing, I was just messin with ya... :mrgreen:

_________________
--Meyrick--
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Mon Feb 21, 2005 12:22 am    Post subject:  

your a very big boy and i wouldnt want an ass kicking in medford any way but in the air :mrgreen:
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1314
Location: Fremont, CA

PostPosted: Mon Feb 21, 2005 12:33 am    Post subject:  

john wondra wrote:
your a very big boy and i wouldnt want an ass kicking in medford any way but in the air :mrgreen:


You don't have to worry about me in the air, I'm still struggling. :mrgreen: The Medford trip is questionable for me right now, too many contest and not enough vacation time and money. Crying or Very sad

_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 454
Location: Jackson, MS

PostPosted: Mon Feb 21, 2005 6:01 am    Post subject:  

Now that is a good looking bipe. Good job Steve.
_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1048
Location: Belvidere, NJ

PostPosted: Mon Feb 21, 2005 7:09 am    Post subject:  

ditto, does it accept the same motor? whats the weight? looks like an awsome bipe. Cool Cool
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
45 posts here were not archived
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1132
Location: Fremont, CA

PostPosted: Sun Apr 10, 2005 6:48 am    Post subject:  

That looks good Red. I still gotta build one myself.
_________________
--Meyrick--
Back to top  
redryder



Joined: 09 Apr 2005
Posts: 23
Location: Melbourne, Australia

PostPosted: Wed Apr 13, 2005 11:10 pm    Post subject:  

Add this one to your "To Do" list, Meyrick. It flies really well. I'm saving up for some better lipo's so I can spin the 12x6 SF prop.

Any chance of getting the plan updated to show the revised CG? It might save some grief for less experienced flyers.

redryder
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1132
Location: Fremont, CA

PostPosted: Thu Apr 14, 2005 7:08 am    Post subject:  

redryder wrote:

Any chance of getting the plan updated to show the revised CG? It might save some grief for less experienced flyers.

redryder


Hmmm, I didn't know there was a problem with the CG mark? What's wrong with it?

_________________
--Meyrick--
Back to top  
redryder



Joined: 09 Apr 2005
Posts: 23
Location: Melbourne, Australia

PostPosted: Thu Apr 14, 2005 2:21 pm    Post subject:  

Meyrick wrote:


Hmmm, I didn't know there was a problem with the CG mark? What's wrong with it?


The plan shows the CG at 1-1/16" behind the leading edge of the lower wing. deadstk moved it forward to 5/8".

red
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1132
Location: Fremont, CA

PostPosted: Thu Apr 14, 2005 2:57 pm    Post subject:  

redryder wrote:
Meyrick wrote:


Hmmm, I didn't know there was a problem with the CG mark? What's wrong with it?


The plan shows the CG at 1-1/16" behind the leading edge of the lower wing. deadstk moved it forward to 5/8".

red


Ok, I'll let him know. He's on vacation and won't be back till Friday. Thanks.

_________________
--Meyrick--
Back to top  
redryder



Joined: 09 Apr 2005
Posts: 23
Location: Melbourne, Australia

PostPosted: Sat Apr 16, 2005 1:27 am    Post subject:  

Here's #2! Smile

I built this one for a mate. I just need to install his motor and radio gear. Paint is a mix of polycarbonate spray cans. The fluoro orange is Tamiya, the blue is Pactra. No problems with the paint and the foam. I like the way it came out.

The specs will be:

Motor :- Himark 2025/4200 with 5.33:1 Himark gearbox
Prop :- 10x4.7 SF to start
Battery :- Kokam 3S 1250mAh

Hopefully I'll finish it tonight or early tomorrow and we'll test fly it. Should be a good comparison between the outrunner and the geared inrunner.

red



top-01.JPG
 Description:
 Filesize:  52.14 KB
 Viewed:  194 Time(s)

top-01.JPG



LRQ-01.JPG
 Description:
 Filesize:  48.02 KB
 Viewed:  194 Time(s)

LRQ-01.JPG



LHS-01.JPG
 Description:
 Filesize:  42.85 KB
 Viewed:  194 Time(s)

LHS-01.JPG


Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1132
Location: Fremont, CA

PostPosted: Sat Apr 16, 2005 3:48 am    Post subject:  

Red, you're a maniac. Very Happy I haven't even begun to cut mine. That looks awesome bro.
_________________
--Meyrick--
Back to top  
redryder



Joined: 09 Apr 2005
Posts: 23
Location: Melbourne, Australia

PostPosted: Sat Apr 16, 2005 11:33 am    Post subject:  

Somebody help me!! I'm building #3 before I've even finished #2! Shocked I'm already addicted to foamies. The only effective treatment is to order more foam. Very Happy

Thanks Meyrick. As I said, I like the paint job.

red
Back to top  
Dado



Joined: 22 Apr 2005
Posts: 3
Location: Slovenia, Maribor

PostPosted: Fri Apr 22, 2005 3:05 am    Post subject:  

Take some vitamins redryder, so that you can keep painting Smile Some of you guys have realy sence for painting and i admire that... i can copy some of your ideas Embarassed
Well,im new here so hello everyone. This is my first 3d model, hope it flyes well too.
http://bucibuc.50megs.com/photo.html

I have some problems with linking the ailerons.. dont understand the plan instructions.. What to put here?


HOpe you will help me
David


Last edited by Dado on Fri Apr 22, 2005 6:58 am; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1132
Location: Fremont, CA

PostPosted: Fri Apr 22, 2005 6:20 am    Post subject:  

Dado wrote:

I have some problems with linking the ailerons.. dont understand the plan instructions.. What to put here?


HOpe you will help me
David


Hi David and welcome. What we use is the Dubro micro bellcrank. We cut them off form the round piece. Just cut a small notch on the back of the aileron and just slide the dubro bellcrank piece.



dubq1851.jpg
 Description:
 Filesize:  45.72 KB
 Viewed:  135 Time(s)

dubq1851.jpg



_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1132
Location: Fremont, CA

PostPosted: Fri Apr 22, 2005 5:05 pm    Post subject:  

This is how it looks like.


horn.jpg
 Description:
 Filesize:  51.18 KB
 Viewed:  116 Time(s)

horn.jpg



_________________
--Meyrick--
Back to top  
Dado



Joined: 22 Apr 2005
Posts: 3
Location: Slovenia, Maribor

PostPosted: Sat Apr 23, 2005 12:45 am    Post subject:  

Meyrick, thanx a lot, you helped so much. i hope that in the next two weeks ill get the electronics and post the video of my first flight! Smile

Thanx again
Back to top  
dankodog



Joined: 23 Apr 2005
Posts: 7

PostPosted: Sat Apr 23, 2005 2:53 pm    Post subject:  

Here is mine. I'm still mounting it. I posted the photo on RcGroup too but I think here is the best place.

Cheers



FoameIIx3D02.jpg
 Description:
 Filesize:  35.83 KB
 Viewed:  79 Time(s)

FoameIIx3D02.jpg


Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1132
Location: Fremont, CA

PostPosted: Sat Apr 23, 2005 3:03 pm    Post subject:  

Whoa, I like the brignt green. Is that glow in the dark too? If it is, do some night flying vids. Very Happy
_________________
--Meyrick--
Back to top  
dankodog



Joined: 23 Apr 2005
Posts: 7

PostPosted: Sat Apr 23, 2005 3:23 pm    Post subject:  

No, it's simple fluor green, but some time ago I found this glow inc.

http://glowinc.com/glow-in-the-dark/model-airplanes.aspx

Cheers
Back to top  
75 posts here were not archived
dankodog



Joined: 23 Apr 2005
Posts: 13
Location: Barcelona (Spain)

PostPosted: Mon Jun 20, 2005 9:46 am    Post subject:  

I was training the torqueroll since I build this biplane. The only thing I can say is wooowwww is a torquing machine! The disadvantatge is that it can't do a knife edge easily... mad

One photo of this saturday at the 2nd Miliamperios Meeting. Miliamperios.com is the best spanish speaking forum.



Cheers
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1099
Location: Sunnyvale, CA

PostPosted: Mon Jun 20, 2005 1:17 pm    Post subject:  

That scheme is SCHWWWEEEEET! eek
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Ben-Rod



Joined: 16 Feb 2005
Posts: 27

PostPosted: Thu Jun 23, 2005 2:48 pm    Post subject:  

dankodog wrote:
I was training the torqueroll since I build this biplane. The only thing I can say is wooowwww is a torquing machine! The disadvantatge is that it can't do a knife edge easily... mad

One photo of this saturday at the 2nd Miliamperios Meeting. Miliamperios.com is the best spanish speaking forum.



Cheers


You should try the Extra 330S. Its the plane that will rock your socks off. peace out... Razz

Ben
Back to top  
deadstk



Joined: 22 Apr 2004
Posts: 31
Location: Fremont, CA

PostPosted: Thu Jun 23, 2005 6:22 pm    Post subject:  

Make sure the CG is forward! It will knife-edge fine if you do. BTW, that’s one of the nicest schemes I’ve seen so far.
Back to top  
eewannab



Joined: 22 Jun 2005
Posts: 3

PostPosted: Sat Jul 02, 2005 10:31 pm    Post subject: landing gear  

I'm having a hard time with the landing gear. How long are the .8mm rods? What is the angle between the rod and the fuse?

Can somebody walk me through the landing gear install? How do you get the rods through the fuse at the right angle?

Is the plywood re-inforcer just a half circle with an .8mm slot, or is it a whole circle with a whole drilled at the right angle?

Thanks.
Back to top  
Ben-Rod



Joined: 16 Feb 2005
Posts: 27

PostPosted: Mon Jul 04, 2005 8:20 am    Post subject:  

Getting warmed up for the pool party later. big grin

Ben



P1010178s.JPG
 Description:
 Filesize:  34.5 KB
 Viewed:  483 Time(s)

P1010178s.JPG



P1010177s.JPG
 Description:
 Filesize:  35.41 KB
 Viewed:  483 Time(s)

P1010177s.JPG



P1010176s.JPG
 Description:
 Filesize:  38.78 KB
 Viewed:  483 Time(s)

P1010176s.JPG


Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1099
Location: Sunnyvale, CA

PostPosted: Mon Jul 04, 2005 10:13 pm    Post subject:  

Heres my pool pic!


Madness at Salem's 038 edited.jpg
 Description:
 Filesize:  216.26 KB
 Viewed:  466 Time(s)

Madness at Salem's 038 edited.jpg



_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Ben-Rod



Joined: 16 Feb 2005
Posts: 27

PostPosted: Tue Jul 05, 2005 4:35 am    Post subject:  

Nice one Zak. How do you like that 300L from Lee? They sweet...

Ben
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1312
Location: Fremont, CA

PostPosted: Tue Jul 05, 2005 7:03 am    Post subject: Re: landing gear  

eewannab wrote:
I'm having a hard time with the landing gear. How long are the .8mm rods? What is the angle between the rod and the fuse?

Can somebody walk me through the landing gear install? How do you get the rods through the fuse at the right angle?

Is the plywood re-inforcer just a half circle with an .8mm slot, or is it a whole circle with a whole drilled at the right angle?

Thanks.


The angle of the rod is based on the user's preference. You use a 1/32 ply for the reinforcer. Use a 1" hole saw, you first drill straight thru the ply in the middle and then angle the drill bit on how you want your landing gear installed. This thread will help explain how to install it.
http://www.3dbatix.com/forum/viewtopic.php?t=302&postdays=0&postorder=asc&start=15

_________________
--Meyrick--
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1099
Location: Sunnyvale, CA

PostPosted: Tue Jul 05, 2005 9:29 am    Post subject:  

Ben-Rod wrote:
Nice one Zak. How do you like that 300L from Lee? They sweet...

Ben


Its a great flying plane, and easy to build. That one was built in the car on the way to riverside. Surprised

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Zaimoran



Joined: 29 Sep 2005
Posts: 6

PostPosted: Thu Sep 29, 2005 7:03 pm    Post subject:  

About KE coupling, it is pitch or roll coupling? I think it would roll proverse because of the tall rudder, maybe we can fix it out tweaking the shape of it.

It`s a pretty design and a very well done plan

thanks for it



STA40606.JPG
 Description:
 Filesize:  73.6 KB
 Viewed:  304 Time(s)

STA40606.JPG


Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 7
Location: Philippines

PostPosted: Fri Nov 25, 2005 11:16 pm    Post subject: Reduced Foamies  

Good day gents... belated happy Thanksgiving!

Given that there's no supply of 6mm depron to be found in the Philippines (I've been looking for some 4 months now)... and that depron comes only in either 3 mm, 2 mm or 1 mm here... I was wondering if its possible to downsize the plans so that it can be built using 3 mm mostly? What reduction would you recommend?

While some fellows have posted smaller-build planes using either the Extra or other foamies, there has been no mention of what thickness depron was used. Would 3 mm work for a reduced plan?

I've thought of fusing two 3 mm sheets together (they also are available preglued) but I'm concerned that the glue may dramatically increase overall weight. I've also thought of trying to order depron from depronUSA and similar sources, but its a pain in the bum to get them to approve credit cards from my country - and Paypal doesn't list us either. Not to mention that our local delivery services are likely to crunch up the depron en route to my home.

My current idea is to build the plane completely on 3mm at 75% of the original size.

Any thoughts that you could share on this would be greatly appreciated. There's an entire bunch of folk waiting to see what happens with the plane I build.

regards to all

_________________
how do you want to fly?
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1099
Location: Sunnyvale, CA

PostPosted: Sun Nov 27, 2005 12:00 am    Post subject:  

I believe the magic number was 78%. I built one out of all 3mm. you need to put cross bracing between the wings (carbon) and i used flat carbon on the LE and TE of the bottom wing (like a shocky) and flat carbon on the LE of the top wing. The 3mm worked well. An AXI 2208/34 would be a good match.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 7
Location: Philippines

PostPosted: Tue Nov 29, 2005 8:11 am    Post subject:  

Thanks Zak! I appreciate the response.

I've not seen any flat carbon at any of the local shops. But I'm pretty sure that I can order it & have it shipped here. I do own an Ultrafly Outrage and am familiar with this method of construction (although the wings on those are only 2 mm thick and pretty flimsy).

I've already had the plans printed out earlier today, at 100%, 75% and 60%... the 60% is for a CN12 beta IPS brushless. I'll let you know how the models go. Am not sure how you folks are getting the pictures loaded here. Any word on how to do this?

Likewise, could you give me a recommendation as far as thrust goes for these planes? Should I get an engine that generates 15 to 19 oz thrust or 20 to 24 oz thrust? I'd llike to figure out a working ratio as far as thrust and weight go. What do you think would be a good ratio in order to do 3D maneuvers?

Finally, I'm curious as to which foamie you had built at 78%?

Hope to hear from you soon. smile

_________________
how do you want to fly?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1312
Location: Fremont, CA

PostPosted: Tue Nov 29, 2005 9:11 am    Post subject:  

corkscrew wrote:
I'd llike to figure out a working ratio as far as thrust and weight go. What do you think would be a good ratio in order to do 3D maneuvers?


At least a minimum of 1.5 to 1 would do justice for 3D.

_________________
--Meyrick--
Back to top  
boolat



Joined: 29 Nov 2005
Posts: 19

PostPosted: Wed Nov 30, 2005 9:35 am    Post subject:  

I know a friend who goes cuts me the Foame II
problem I do not find plan DXF !
and I cannot convert file pdf into DXF ?

if a person has file foame2.DXF you it will be able send the file to me please ?

Dancks
Back to top  
GUE



Joined: 14 Aug 2004
Posts: 45
Location: Moedling, AUSTRIA

PostPosted: Wed Nov 30, 2005 9:43 am    Post subject:  

look at ftp://www.mate.at


_________________
cu

GUE
Back to top  
boolat



Joined: 29 Nov 2005
Posts: 19

PostPosted: Wed Nov 30, 2005 11:20 am    Post subject:  

DANCKS DANCKS
Back to top  
boolat



Joined: 29 Nov 2005
Posts: 19

PostPosted: Fri Dec 09, 2005 11:18 am    Post subject:  

how much weighs it FOAMe IIx 3D vacuum ?
Back to top  
boolat



Joined: 29 Nov 2005
Posts: 19

PostPosted: Mon Dec 12, 2005 12:17 pm    Post subject:  

I can make it fly with an engine axi 2204/54? lipo 3S 450 mah + 2S 450 Mah?

Confused
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Mon Dec 12, 2005 3:14 pm    Post subject:  

Are you saying that you are gonna run it on 5s? That motor will not pull the foame IIx. If you made a very small one it would work fine.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
boolat



Joined: 29 Nov 2005
Posts: 19

PostPosted: Tue Dec 13, 2005 1:10 am    Post subject:  

Too bad! I have an engine 2204/54 with 2 lipo one of 2S 450MAH and one of 3S 450 MAH with a phoenix 10!

What a plane I can with depron 6mm!
I wanted to make both plane which is on the site!

FOAMe IIx and EXTRA 330 3D !

Problem you me known as that:

Quote:
That motor will not pull the foame IIx. If you made a very small one it would work fine.


Or I can found the same planes with small the plans?
For the material electronics which I have!

Large a dancks smile
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Tue Dec 13, 2005 8:13 am    Post subject: 5S and power systems  

Boolat, I hope you don't mind my two cents worth...

Consider the following - its not the size of the plane that should matter at this time, rather the power to weight ratio. As the brochure for your motor specifies:

AXI 2204 Series Outrunner Brushless Motors
Small and light, 1-1/16" diameter and less than 1 oz. in weight (24.5g). For models from 3 to 10 oz.


As Meyrick had advised, in order for a plane to be aerobatic you'll have to build it in such a way that the power to weight ratio is 1.5 (thrust):1 (weight). Ergo, shrink the plane so that you get the correct power to weight ratio.

For regular "sport" flying, you will need at least 0.7 to 1.0 is to 1 ratio, that is if you'd like it to fly decently enough without having to worry about fighting for every inch of height that you can get. Of course, at 0.7:1, forget about aerobatics. Theoretically, a 1:1 ratio will hover in zero wind conditions. The good question is, how do you safely pull out of the maneuver if at full throttle, your plane is at an equilibrium (engine thrust = gravity's pull)? Ergo, at least 1.1:1 to get out of hovering safely.

As for your suggested power source, I'm not too familiar with setups for what you have planned... but all the lipolys I own came with a manufacturer's manual recommending that they should NEVER be used in either parallel or series. At least, this holds true for all the Dualsky XPower Lipoly batteries.

Its possible that you will burn your motor with a 5S setup. The same brochure I've quoted above likewise says the following:

For 6 to 7 cells or 2 Li-Poly cells, 7x3.5 to 8x4.3 props. 1380 RPM/V. Max current 6.5 amps.

For your motor, even a 3S is risky.

Have you tried using a 5S setup before? If you'd had some success with it, I surely would love to read more about it. smile

Best of luck with your project smile



3Dbatix team (Zak & Meyrick), what are your thoughts on the towerpro 2408/21? They're phenomenally cheap - as these are available at a little less than $20.00 USD here in the Philippines. The manufactur's specifications state that these draw a horrible 13.1 amps using a 3S/11.1 volt pack, but packs a good 21 oz thrust on a GWS HD 0840 prop. Some fellows at my Club (Weekend Flyer's Club Taytay) and I are considering using these for both the Extra330 and FoameIIx planes (full size). While the power to weight ratio is theoretically 1.61:1 for the Extra, and 1.4:1 for the foame2x... my concern lies largely in hovering ability considering that the prop is short. Do you think it would be a wiser course to go 78% of full size?

Our orders for 6mm depron foam from DepronUSA should arrive about 3 to 4 days from now. We have our plans ready in four sizes: full-size, 78%, 74.5% and 60%. I eagerly await your recommendations for the size using the towerpro set-up above.

_________________
how do you want to fly?
Back to top  
boolat



Joined: 29 Nov 2005
Posts: 19

PostPosted: Tue Dec 13, 2005 12:39 pm    Post subject:  

ok thank you! I go bought the engine axi AXI 2212/34 outrunner (Max performance) smile
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Wed Jan 18, 2006 3:04 pm    Post subject:  

Good day gents!

Two weeks ago, my flying buddy - Mr Benneton (Angel Guerrero) and I - completed work on an Extra & a Foame2x. I've attached a picture of the Extra prior to installing the motor and covering.

Mr Benneton was actually the one who'd cut & put together the planes. I just helped a bit here & there. Mainly, covering was my job.

We took our planes flying at our local club - Weekend Flyer's Club in Taytay. And... I'm happy to report that we had oodles of fun with each one!

The Foame2x is highly responsive. A moderate up elevator sends it on a stall - followed by my favorite - multiple turn spins. Due to my lack of skill tho, I find it a bit difficult to fly. But over time, I see that it could easily be my favorite.

The Extra on the other hand... is an amazing machine! Nearly everyone on the field whom I'd lent the plane to commented how gentle and yet, highly agile the plane is. For some precision flying, I would recommend this beauty first.

On both planes, we used stick-mounted Himaxx 2015/4100s motors using 1260 SF APC props, backed by 1320 mAh and 1200 mAh lipoly packs. Even in strong winds, we did not find this power combo to be lacking. In fact, I was surprised by the unlimited vertical capability of either plane.

More pictures to follow of the finished planes. We love the planes so much that we've decided to build more. I also have a 75% reduced Extra on the way.

Kudos to the team!!!



extraphil.jpg
 Description:
Unfinished Extra prior to Maiden
 Filesize:  21 KB
 Viewed:  150 Time(s)

extraphil.jpg



_________________
how do you want to fly?
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Mon Jan 23, 2006 1:17 pm    Post subject:  

Good day!

Here are a few pictures of 3DBatix planes made in the Philippines. The first picture below is Mr Benetton (Angel Guerrero) with his Foame2X. It actually had more red, orange & yellow prior to taking the photograph. However, we found that using tape for hinges didn't work too well for our needs. Conversion to the use of regular hinges was done, and the covering was removed to make way for this. Will repost, when covered again.

The plane is powered by a Himaxx 2015/4100 using a 6.6:1 gear ratio, driving a 1260 gws SF prop. Battery is 1200 mAh etech, and tt25 Dualsky ESC.



benettonbipe.jpg
 Description:
Mr Benetton Beaming with Pride
 Filesize:  24.63 KB
 Viewed:  111 Time(s)

benettonbipe.jpg



_________________
how do you want to fly?
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Mon Jan 23, 2006 1:32 pm    Post subject:  

Next picture is of me holding my Extra. This originally had red, yellow & black markings on it... but I couldn't see the yellow at a distance. So I dropped the yellow and went for a simpler two-tone red/white mix (black trimmings).

Note that crossbrace was placed on top of the horizontal fuse, beginning from directly behind the motor - leading all the way to end of the fuse. This Extra packs 4 servos, 1 for each aileron. Likewise, the landing gear is functional.

This is also powered by a Himaxx 2015/4100 on a 6.6:1 gear ratio, 1260 prop... using a TT25 Dualsky ESC, and 1350 mAh lipoly battery. We're testing the same planes using a 2015/5400 and 2025/5300 himaxx motors this weekend just to compare performance. But so far, we don't really see any need for more power.

In my humble opinion, the Extra is the kindest of these planes & the easiest to fly.



myextra.jpg
 Description:
Me & my Extra
 Filesize:  24.95 KB
 Viewed:  110 Time(s)

myextra.jpg



_________________
how do you want to fly?
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Mon Jan 23, 2006 1:39 pm    Post subject:  

Final picture below has been dubbed the "Right Brothers". Shown are the Extra & Foame2X from above, an unfinished Foame2X without landing gear on the road, and I'm holding an unfinished 75% Extra (that I cut).

The 75% Extra has been referred to fondly as "Extra Small". It is powered by a Dualsky XMotor 300A, using a 9047 SF APC prop, using 1050 mAh 2S Dualsky lipoly. Will advise how it performs this weekend. We decided that there was still a need for the crossbrace (this time mounted on the bottom) after a little testing. Unlike its bigger brother, this one uses only 3 servos.



righbrothers.jpg
 Description:
 Filesize:  26.3 KB
 Viewed:  107 Time(s)

righbrothers.jpg



_________________
how do you want to fly?
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Mon Jan 23, 2006 9:23 pm    Post subject:  

Corkscrew,

The planes look great! Glad you guys are having so much fun with them. Keep the pics commin! Surprised

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
corkscrew



Joined: 24 Nov 2005
Posts: 24
Location: Philippines

PostPosted: Fri Feb 03, 2006 3:09 pm    Post subject:  

As per your latest email, here are more pictures. The first one is Mr Bennetton's 2X, which was shown in a previous picture (above). It was re-covered as I (who sometimes borrows his plane) had a difficult time with the scheme for orientation purposes. It looked the same at any angle while it was up in the air. So I brought it home & changed it. Gladly, Mr Bennetton appreciated the work I put into this.

The second picture is of my own 2X, brand new & to be maidened today. I expect it to fly exactly like Mr Bennetton's, as its the same set-up. The only thing different is the choice of servos. Mine packs HS55s, as I tend to screw around the sky a bit... I wanted more torque.

I'll take more detailed pictures later at the flying field. I wanted to show you guys the modifications that we've made to the plane. Nothing major actually.

Both planes have functional landing gear. The wheel pants hold wheels that work, and the rear has a steerable tailwheel. Likewise, my 2X has an additional carbon frame tube on the top wing. Likewise, these tubes extend beyong the struts (like your Extra 330 foamie). Both planes are powered by Himaxx 2015/4100 on 6.6:1 gear drives, 12x6 props.

On recent review of your video Zak, these motors do not send the plane flying with the same speed & power. Its considerably less. However - it still packs enough punch to hover, do vertical spinning climbs, and fly even in strong gusts that my other planes can't handle.

We've more planes cut (we ordered 2 boxes from DepronUSA). As soon as we can, we will test other motors with a greater thrust to weight ratio, and greater wattage. The main difficulty lies with the battery. Most available lipoly batts here are 12C only. My basic assumption here is that the 1700mAh batteries (Dualsky) will be too heavy for the 2X. Do you agree with me on this?



Image014.jpg
 Description:
Mr Bennetton's 2X
 Filesize:  25.36 KB
 Viewed:  46 Time(s)

Image014.jpg



_________________
how do you want to fly?
Back to top  
26 posts after this were not archived
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive