ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Himax motor HELP!
28 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Fri Feb 18, 2005 1:17 pm    Post subject: Himax motor HELP!  

Just got my Himax 2812-0850 in the mail today. It looks like I have to reverse the shaft in order to mount this correctly on my diablo--right now, the motor mount would attach to the front of the motor around the shaft. This can't be right! There is one set screw on a wheel collar that is located on the front of the motor where the shaft comes out. There is another set screw holding the shaft in place at the rear of the motor. I removed both of these and am still unable to get the shaft out or move it. How do I make this work? Do I have the wrong motor?
see attached pictures...
thanks!
Liam



himax rear.JPG
 Description:
 Filesize:  61.53 KB
 Viewed:  588 Time(s)

himax rear.JPG



himax front.JPG
 Description:
 Filesize:  57.54 KB
 Viewed:  588 Time(s)

himax front.JPG



himax.JPG
 Description:
 Filesize:  56.89 KB
 Viewed:  588 Time(s)

himax.JPG


Back to top  
los08



Joined: 29 Jan 2005
Posts: 2

PostPosted: Fri Feb 18, 2005 1:40 pm    Post subject:  

humm.. looks a little different than mine. Maybe you have newer version.
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Fri Feb 18, 2005 2:18 pm    Post subject:  

mount it from the front...
_________________
-Chris-
3D Foamy
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Fri Feb 18, 2005 4:13 pm    Post subject:  

I can't mount it from the front. I am building a diablo and it must be mounted at the rear, or the opposite end of the shaft.
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Fri Feb 18, 2005 4:19 pm    Post subject:  

why it doesn;t make a differance.
_________________
-Chris-
3D Foamy
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Fri Feb 18, 2005 4:57 pm    Post subject:  

Got it! After I removed the set screws on both ends, I had to use a pair of pliars to loosen the shaft. Then I was able to pull it out and reverse it.
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 457
Location: Danville, VA

PostPosted: Fri Feb 18, 2005 7:30 pm    Post subject:  

los08 wrote:
humm.. looks a little different than mine. Maybe you have newer version.


Yeah, they did change the design slightly. May transfer heat away a little better.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Feb 18, 2005 8:01 pm    Post subject:  

Yeah those Himax are tricky and their manual blows ass. Also remove that square frame with those two screws, you don't need that. Looking good Liam...
_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Feb 18, 2005 8:02 pm    Post subject:  

Chris wrote:
why it doesn;t make a differance.


The cross mount only mounts on one end so you have to reverse the shaft.

_________________
--Meyrick--
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Fri Feb 18, 2005 8:33 pm    Post subject:  

no i'm saying why does it make a differance if it is mounted from the back or front, I dont think it matters.
_________________
-Chris-
3D Foamy
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Feb 18, 2005 8:51 pm    Post subject:  

Chris wrote:
no i'm saying why does it make a differance if it is mounted from the back or front, I dont think it matters.


I don't get your question. That motor can only be mounted on it's back on the Diablo foamie.

_________________
--Meyrick--
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 367
Location: Canada

PostPosted: Fri Feb 18, 2005 8:55 pm    Post subject:  

thats what i'm saying i don;t see why it can only be mounted from behind many motor on foamies are mounted on the front of the fuse.
_________________
-Chris-
3D Foamy
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Feb 18, 2005 10:52 pm    Post subject:  

Chris wrote:
thats what i'm saying i don;t see why it can only be mounted from behind many motor on foamies are mounted on the front of the fuse.


LOL.. I still don't understand what you're talking about. This picture shows how it is suppose to be mounted.



motormounted.jpg
 Description:
 Filesize:  72.78 KB
 Viewed:  534 Time(s)

motormounted.jpg



_________________
--Meyrick--
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Sat Feb 19, 2005 3:02 am    Post subject:  

Hey-thanks for the info. And Meyrick-you are right-that instruction sheet blows ass! Here is a picture of the correct motor set up and a pic of my trim scheme thus far.
Can't wait to try hovering!!
Liam
ps--I accidentally peeled off the plans before I marked where the CG was. How far back to I measure from the leading edge to find the CG?
And,when you balance, is it the same as any other plane--level or slightly nose down? Or does it have to be more tail heavy for 3d?



fixed.JPG
 Description:
 Filesize:  65.34 KB
 Viewed:  530 Time(s)

fixed.JPG



Trim.JPG
 Description:
 Filesize:  99 KB
 Viewed:  530 Time(s)

Trim.JPG


Back to top  
-3de-



Joined: 25 Sep 2004
Posts: 81
Location: Reno----911

PostPosted: Mon Mar 07, 2005 8:31 pm    Post subject:  

Wow, I agree, switching from a stick mount to a rear mount was a lil' pain it my arse! Meyrick, looks like Liam and I both received a newer version with 2 set screws and no clips. The shaft has 4 groves in it for setscrews so you can slide it from front to rear without having to totally remove the shaft. My Diablo should fly tomorrow!
Dancing
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Mon Mar 07, 2005 11:24 pm    Post subject:  

Yep-it was a pain to figure out-but it works. Sweet you are going to fly it tomorrow--it should fly great, mine did!
Good luck!

_________________
--Liam--
Back to top  
Jynx13



Joined: 06 Jan 2005
Posts: 45

PostPosted: Thu Mar 17, 2005 7:00 pm    Post subject:  

I just got my Hi-max in and i had to do the same thing. I couldn't pull the shaft all the way out so i just pushed it through and tightened the set screws and it worked. I stuck a 11x4.7apc and mounted it on my e-f ultimate and i love it. I hovered a whole battery and and felt the motor and it was barely warm. I cant believe i have been running a dang gearbox all this time.

I'm waiting for my foamtana to come in so i can stick it on that.
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Mon Mar 21, 2005 11:38 pm    Post subject:  

3de--how did it go? My first flight went really well, although it was tame. I still need to mess around with my CG. Right now, the battery is as far forward as it can go on the fuse. It balances level or slightly nose down. I know that if I want to learn 3d I must make the plane more tail heavy, but I am afraid it will become too unstable if I move it too far back. Can anybody give me a reference on how far back to mount the battery, or details on where the CG line is on the wing, or how the plane should balance when I hold the plane under the CG line? Slightly tail heavy? Really tail heavy?
_________________
--Liam--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 457
Location: Danville, VA

PostPosted: Tue Mar 22, 2005 3:50 am    Post subject:  

Liam wrote:
3de--how did it go? My first flight went really well, although it was tame. I still need to mess around with my CG. Right now, the battery is as far forward as it can go on the fuse. It balances level or slightly nose down. I know that if I want to learn 3d I must make the plane more tail heavy, but I am afraid it will become too unstable if I move it too far back. Can anybody give me a reference on how far back to mount the battery, or details on where the CG line is on the wing, or how the plane should balance when I hold the plane under the CG line? Slightly tail heavy? Really tail heavy?


I place my TP 1320 or KoKam 1500 on the fuse lined up with the wing tube. As a reference, the wing tube is in the middle of the battery or slightly ahead of the middle of the battery which means my CG is a little further back than the recommended, but I like it there. That gives me a reference everytime and I love the CG there. Just try it in different places. It will fly great anywhere mainly.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Tue Mar 22, 2005 8:09 am    Post subject:  

Thanks DTB! That's EXACTLY what I needed to know. I knew I had my CG way too far forward, as the nose wanted to drop even when doing simple rolls. I'm trying to learn a lot more 3d on Real Flight G3, but I had to take a break because I was getting blisters on my thumbs. I'll try out the new CG on my Diablo if the weather ever gets better around here...
_________________
--Liam--
Back to top  
-3de-



Joined: 25 Sep 2004
Posts: 81
Location: Reno----911

PostPosted: Tue Mar 22, 2005 11:02 am    Post subject:  

Liam wrote:
3de--how did it go? My first flight went really well, although it was tame. I still need to mess around with my CG. Right now, the battery is as far forward as it can go on the fuse. It balances level or slightly nose down. I know that if I want to learn 3d I must make the plane more tail heavy, but I am afraid it will become too unstable if I move it too far back. Can anybody give me a reference on how far back to mount the battery, or details on where the CG line is on the wing, or how the plane should balance when I hold the plane under the CG line? Slightly tail heavy? Really tail heavy?


Well my first flight I threw the prop while doing a knife edge pass followed by hitting a pole! laughing The plane broke just behind the wing, but a little CA and it was fine. I also used Sturdy Board to build it so its a flying brick. But I did peel some of the paper from the sturdy board on most of the plane and it flys much lighter now. smile I really like how they fly.
On the CG mine is way back from what it says on the plans, and it flys great!
I cant wait to fly one made from Depron! Dancing
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Tue Mar 22, 2005 3:42 pm    Post subject:  

Yep-I stacked mine a few times and even ripped the motor mount out. Shocked But a little CA cures all and I fly again w/in 15 minutes!
_________________
--Liam--
Back to top  
minnzoo



Joined: 27 Feb 2005
Posts: 30
Location: Conestoga, Pa.

PostPosted: Wed Apr 06, 2005 5:12 pm    Post subject:  

I got my HImax motor shaft reversed also but I was also able to take care of it, but how the heck do I use the GWS prop with the prop adaptor that came with this motor. It looks like I will have to modify the prop. Ream out the hole and cut down the prop hub. Any help?

David
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1143
Location: Sunnyvale, CA

PostPosted: Wed Apr 06, 2005 6:21 pm    Post subject:  

Liam,

Thats one SWEET lookin diablo! Rock on man!

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1143
Location: Sunnyvale, CA

PostPosted: Wed Apr 06, 2005 6:29 pm    Post subject:  

I know what Chris is talking about. I could not find a picture to post, but here is a link to Lee Ulinger's insruction packet for the FoamtanaS. You can see a front mounted motor in here.

http://www.darrolcady.com/Electrics/Documents/FoamtanaS%20V3.pdf

(realize this is a PDF File.)

_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Wed Apr 06, 2005 6:50 pm    Post subject:  

Thanks Zak! I've seen some of your videos-like the one where you fly in the gym, and I have also seen you at SCCMAS, and I am very jealous of your abilities!
I'm trying to learn 3D now--trying stuff on G3 Sim and then trying with my Diablo. Almost got hovering down, but rolling Harriers are super tough...can't seem to separate elevator and rudder movements so that they are totally independent. Any tips?

_________________
--Liam--
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1143
Location: Sunnyvale, CA

PostPosted: Wed Apr 06, 2005 7:34 pm    Post subject:  

Start with rolling circles using just elevator to keep the nose up (not high alpha). Then start workin in the rudder. Its really a big timing thing. The fastest way to learn em is to burn more fuel...or electrons laughing
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Liam



Joined: 16 Feb 2005
Posts: 23
Location: San Jose, CA

PostPosted: Wed Apr 06, 2005 10:06 pm    Post subject:  

Thanks Zak! I'll keep trying.
Keep those awesome videos coming... sly wink

_________________
--Liam--
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive