ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Spinner problems
6 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Fri Feb 11, 2005 3:06 pm    Post subject: Spinner problems  

Hey guys, got another problem. On my Evoloution1.00 I have a Tru turn 2.5 inch spinner that has a 1/16 inch gap to the backplate. I have tried different arrangments to make it fit but it won't. Not the screw won't come back out. has anybody had this problem before?
_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Feb 12, 2005 9:29 pm    Post subject: Re: Spinner problems  

fly boy 1 wrote:
Hey guys, got another problem. On my Evoloution1.00 I have a Tru turn 2.5 inch spinner that has a 1/16 inch gap to the backplate. I have tried different arrangments to make it fit but it won't. Not the screw won't come back out. has anybody had this problem before?


Is the gap between the spinner and the spinner backplate? What is preventing that spinner from mounting properly? Does the prop fit on the spinner cut outs?

_________________
--Meyrick--
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 13, 2005 4:47 am    Post subject: Re: Spinner problems  

fly boy 1 wrote:
Hey guys, got another problem. On my Evoloution1.00 I have a Tru turn 2.5 inch spinner that has a 1/16 inch gap to the backplate. I have tried different arrangments to make it fit but it won't. Not the screw won't come back out. has anybody had this problem before?

does the prop stop the spinner at all? that is the #1 problem. if it does, go and get the 'wide slot' for that size. or just cut it with sheet metal scissors and gfrind it with dremel-age!

_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 286
Location: Milwaukee,WI

PostPosted: Sun Feb 13, 2005 8:46 am    Post subject:  

Yeah it's a gap between the spinner and the spinnner backplate. It is the wide blade slot as well. It seems that the crankshaft is too long. The problem is that I can't get the screw that holds the spinner on off now it will not unscrew. Maybe I stripped the srew or something a little bit? Anyway I think that I have to get a new spinner and rip this one off with a grinder or something.
_________________
Team Greenfield News and Hobby

Dave Partick 27% Extra 330L
Raptor 50
TOC1 30% Yak 54
Judge 540
Shocky Extra

http://www.greenfieldnewsandhobby.com
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sun Feb 13, 2005 9:01 am    Post subject:  

fly boy 1 wrote:
Yeah it's a gap between the spinner and the spinnner backplate. It is the wide blade slot as well. It seems that the crankshaft is too long. The problem is that I can't get the screw that holds the spinner on off now it will not unscrew. Maybe I stripped the srew or something a little bit? Anyway I think that I have to get a new spinner and rip this one off with a grinder or something.


What about while pulling on the spinner cone and unscrew? Otherwise, bust out the dremel cut off wheel and cut from the tip of the cone.

_________________
--Meyrick--
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Feb 13, 2005 9:37 am    Post subject:  

dont cut the spinner Shocked poor thing......
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive