ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Li-Polys BLOW ASS
12 posts
 
   3DBatix Forum Index -> Foamies
 
Author Message
fly boy 1



Joined: 12 Nov 2004
Posts: 66
Location: Milwaukee,WI

PostPosted: Thu Feb 03, 2005 7:02 pm    Post subject: Li-Polys BLOW ASS  

This plane has really pissed me off from the start. I really need some help here. I have an E-Tec 1200mah 3S li-poly that I think have shorted a wire. I charged it and everything was OK then all of a sudden when I hooked up the batt to the esc there was a loud sizzleing sound so I immediatley disconnected the wires. When I did that I saw that the ends of the connector on the Battery end had melted a little. I could use an expert opinion on this *hint*Meyrick*hint*. THey are JST connectors by the way.


Go GAS&GLOW F**K Li-Poly
Back to top  
8KCABrett



Joined: 01 Feb 2005
Posts: 12

PostPosted: Thu Feb 03, 2005 7:27 pm    Post subject:  

Whoa. . .I'm no expert on li-poly but that sounds like salt water bath time. . . until someone who does know comes in keep that in a fire proof area!
_________________
-Brett

Team Raven
www.waynehandley.com
Northern California Aerobatic Club
www.iac38.org
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 66
Location: Milwaukee,WI

PostPosted: Thu Feb 03, 2005 7:32 pm    Post subject:  

The pack seems fine it's not inflating or any thing. I'm starting to think that it is the connector. The plastic on it has melted a little, and some of the metal is showing. Nothing seems to be wrong with it but, the salt water bath may be the only option... now waiting on the opinion of the foamy Guru.
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 270
Location: Toronto, Canada

PostPosted: Thu Feb 03, 2005 8:13 pm    Post subject:  

i never use jst, jst connectors suck #### use micro deans.
_________________
-Chris-
3D Foamy
Back to top  
8KCABrett



Joined: 01 Feb 2005
Posts: 12

PostPosted: Thu Feb 03, 2005 8:18 pm    Post subject:  

I was just thinking that I read the JST amp rating was pretty low. . .

looking for the info. . .

_________________
-Brett

Team Raven
www.waynehandley.com
Northern California Aerobatic Club
www.iac38.org
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 686
Location: Sunnyvale, CA

PostPosted: Thu Feb 03, 2005 10:48 pm    Post subject:  

Well sounds like reversed polarity to me. id put diff connectors on the battery and speed control, and make sure they are the right polarity. I use the mirco deans.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Thu Feb 03, 2005 11:00 pm    Post subject:  

Those packs are pretty much done. They will charge fine but will only last for 3~4 minutes of flight time. I did the same thing to my TP packs a while back, just shorted it for a sec and saw little smoke thinking it was fine. The pack was fine for a couple of days but as you recharge more the pack died slowly. They were cool and replaced it for half price. I dunno about Etec's warranty.
_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Thu Feb 03, 2005 11:05 pm    Post subject:  

I was using JST for a long time before I switched to micro deans last year. I did not notice any difference between the two. Both connectors gave me the same performance.
_________________
--Meyrick--
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Fri Feb 04, 2005 8:26 am    Post subject:  

I always have JST and they have worked flawlessly. Very Happy
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 66
Location: Milwaukee,WI

PostPosted: Fri Feb 04, 2005 3:40 pm    Post subject:  

Well, I'm gonna have to kick myself in the balls for this one. d'oh! Reverse polarity it is. I had the connection on the speed control end reversed. D'oh Oh well, gotta get a new one I guess. Rolling Eyes
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 270
Location: Toronto, Canada

PostPosted: Fri Feb 04, 2005 3:53 pm    Post subject:  

if you plugged the battery int the esc backwards they are both fried i believe
_________________
-Chris-
3D Foamy
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 924
Location: Fremont, CA

PostPosted: Fri Feb 04, 2005 5:06 pm    Post subject:  

Chris wrote:
if you plugged the battery int the esc backwards they are both fried i believe


That's how I fried mine. I was using the non-polarized micro deans then and switched to polarized micro deans so it does not happen again. d'oh!

_________________
--Meyrick--
Back to top  
 
   3DBatix Forum Index -> Foamies All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive