| |
| Author |
Message |
8KCABrett

Joined: 01 Feb 2005 Posts: 16
|
Posted: Wed Feb 02, 2005 5:34 am Post subject: Snap-Spoilerons--Which Radios can do this? |
|
|
I am looking for a new transmitter that has the ability to do snap-spoileron type mixing. I currently run older JR XF622's and have to do some switch flipping that I really would rather avoid. I have really taken to JR gear over the last 8 years, but I would be interested in hearing what those of you who do this are running as this type of mixing doesn't usually show up in the Tx features lists.
I know the JR 8103 and higher can do it, and the high end stuff from most manufacturers, but what about the JR 6102, X-378, Futaba 7C and other sub $300.00 transmitters?
Thanks _________________ -Brett
Team Raven
www.waynehandley.com
Northern California Aerobatic Club
www.iac38.org |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Wed Feb 02, 2005 8:39 am Post subject: |
|
|
The 7C has spoileron mixing and several other mixes, but lacks the Ailevator program option.  _________________ --Meyrick-- |
|
| Back to top |
|
 |
john wondra

Joined: 05 May 2004 Posts: 360 Location: auburn, wa
|
Posted: Wed Feb 02, 2005 10:28 am Post subject: |
|
|
if you buy a hate to say this its blasphamy, but if you have jr stick with it, buy a 9303 (radio only) i think its like 279 for just teh tx. if your looking for futaba (the better of the 2 IMHO ) you can get a 9c for like 259 tx only. hope this helps _________________ John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs> |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
Posted: Wed Feb 02, 2005 12:40 pm Post subject: |
|
|
I herd there is a problem with the 7c that is pretty serious. It is like if you are using the timer, and if it is linked to the throttle. The plane's memory is lost after a period of time, or the plane goes crazy after a period of time (while in use). I don't [u]exactly[/u] know what it is. But it is something like that...and it isn't to good.
I have a 9c and my pop too. We have yet to have the slightest of a problem. Also, they are probebly the easiest radios to program. I didn't even read the manual, and I do pretty good with it. Even though all I do is use throttle-cut and maybe rates. But still, VERY nice radio. It is the best, easiest, computer radio I have seen. It gets the job done, and gets it done right. Just my opion.  |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Wed Feb 02, 2005 12:54 pm Post subject: |
|
|
One bug that I know exist in my 7C is when I turn on the TX, the right aileron ATV configuration is set to 0 instead of 100 so there is no right aileron input. That happened several times. I use my 7C only for foamies so I just ignore the whole problem. Now I always check my controls before I launch my foamie. Maybe one day, I will send it in for a fix. _________________ --Meyrick-- |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Wed Feb 02, 2005 4:40 pm Post subject: |
|
|
thats very strange.. becasue my dad has a 7c and he has the timer on the throttle. nothing has gone wrong with his, and he got it last summer! those Futaba builders must juts be getting lazy on a few of thier radios.  _________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
Posted: Wed Feb 02, 2005 4:55 pm Post subject: |
|
|
No. It has to do with the design. The only people that were lazy were the engineers, if anybody at all that is. They might have fixed it. And if they did, that is wierd about your dad's.  |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Wed Feb 02, 2005 5:54 pm Post subject: |
|
|
that IS funny thats like killing someone and saying "oh no one will even know thyre gone!"  _________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Wed Feb 02, 2005 7:03 pm Post subject: |
|
|
Yeah, I'm not really happy with Futaba's response on that thread. Sounds like they are hiding something.  _________________ --Meyrick-- |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Wed Feb 02, 2005 8:26 pm Post subject: |
|
|
JR 9303 THE BEST you can buy. Just around 400-500 $ depending on the options you choose, plus JR has Flex-Equip which means that you can choose what comes with the radio, anything wou want within the JR line.
And you dont have to worry about problems either. You'll be very happy with the 9303. Enough functions to control an advanced jet!
This radio has a case that fits right in your hands perfectly and the sticks are the smoothest out there. _________________ Lower??!! |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 1178 Location: Sunnyvale, CA
|
Posted: Wed Feb 02, 2005 8:54 pm Post subject: |
|
|
I have seen too many JRs go nuts on the groud making it so that the plane cant fly. Id go with a 9C. Little bit more expensive, but will last forever. The only draw back is you need to get different receivers. I find the Futaba programming to be much easiers and more intuitive then JR, but that is personal choice. _________________ Zak West
www.DesertAircraft.com
www.Smart-Fly.com
www.DarrolCady.com
www.CoolRunningUSA.com
www.TanicPacks.com |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Thu Feb 03, 2005 12:19 am Post subject: |
|
|
Yeah, at least they let you know of a setup problem before you fly, unlike Futabas that let you know IN THE AIR.. My 9303 has never gliched.
I have seen very many go in at Bayside and they never knew what hit them.
Just IMO, I think the way they (JR) lays out their programming is very intuitive. Everything is in two menus and with the 10x and 9x I can program a plane in 7 min.  _________________ Lower??!! |
|
| Back to top |
|
 |
Tom Uhlendorf

Joined: 18 Sep 2004 Posts: 563 Location: Morgan Hill, CA
|
Posted: Thu Feb 03, 2005 9:50 am Post subject: |
|
|
I think that they are pretty damn close. It is just your choice to go with what you want.
But let me add. My dad has used Futaba for 25 years and HAS NOT HAD ONE PROBLEM AT ALL, out of all the ten systems he has had. He also hasn't seen any Futabas fail or get something wrong with it.
He also hasn't seen any problems with JR and either have I. But, I have seen some of the JR servos fail, and not one Futaba.
If I were to choose the JR. I would just get the Tx and the Rx. Then get some servos from Futaba or Hitec. |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Thu Feb 03, 2005 1:11 pm Post subject: |
|
|
I think what Zak meant was that his existing JR receivers will not work with Futaba. They have different shifting signals. _________________ --Meyrick-- |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Thu Feb 03, 2005 2:16 pm Post subject: |
|
|
ohhh, sorry im dumb! :mrgreen: _________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
8KCABrett

Joined: 01 Feb 2005 Posts: 16
|
Posted: Thu Feb 03, 2005 6:50 pm Post subject: |
|
|
John,
If you can point me to a 279.00 9303 I'd be pretty happy, best I've found is 399.99 for TX, module, and charger.
On the issue of which brand. . . I have been flying R/C for 21 years now, I have owned plenty of futaba, airtronics, and JR gear, and in my time using them I have had two radio failures and both were on my futaba stuff. . . now, having said that I don't hold that against Futaba. . . most of the time they were reliable as can be. . .just like my Airtronics and JR were. Maybe someone dropped them unloading them from the truck, a bad batch of solder. . .I can't say, but I took good care of them. The Futaba failures were each a total loss, one simply shorted out and I watched my 1/4 scale P-40 hit the Lake, the other had a weakpoint in the wiring to the antenna that allowed the wire to break. . . which was not very good for my range, and I watched as my model would respond for a moment then ignore me, the respond then ignore me, I pressed the antenna a little bit to be sure it was making contact in the set screw. . no luck, and off my Golderg Ultimate and brand new Surpass 1.20 w/pump went. . . and I had a perfectly normal range check during preflight. :-/ The covers on the servo reversing toggles on the Airtronics went south, and my dual rate switches broke off after about 8 years of frequent use (!) but never failed to do their basic job. I have an old gold colored all metal futaba 4 channel that is near 18 years old and it's still going strong (1991 narrow band modded). That's the way with electronics. I went to JR initially in 1992 when I wanted computer radios, and they were affordable compared to the similar gear from other manufacturers. When I held the JR I was in love, the sticks were soo smooth, the center detents were not sharp, but the sticks weren't limp to accomplish it, the case was very comfy to hold, I had no hard edges to reach over, and the TX was well balanced. . . I bought it, loved it, wondered how I lived without a computer radio before, and haven't had a problem and am still using the same ones in addition to two XF622's that I picked up in 1999 for my current Ultimate and Funtana.
So while I am not really all that brand loyal by nature, I sure like my JR stuff more than anything else I have had or used. . .but I am talking old stuff here. . . and computer reliability is an entirelly different thing, and I don't have any expereince with the recent stuff, so I am all ears. I do have other things I usually devote most of my money too, so I don't spend much on R/C, and probably won't be able to make a total gear switch right now unless there is something really compelling out there that manages to be a reasonable price. I am however taking it all into consideration.
I was looking at the 8103, but have held off on as it's a little pricey for my R/C budget since all I lacked that I wanted on my other stuff is expo and snap-spolers, though now the price has come down. . .it is getting long in the tooth, but then, I figure all I need is expo, dual rates, and snap spoilers. . . of course back before I went to computer radios all I needed was DR!
My ideal thing would be to just get something in the 220--280 range, or if the 6102 did snap spoilers I would get that at 169.00 (Chief) and use that until I consider overhauling my stuff one of these years. The 7CAP seemed like a pretty feature filled radio for the money, but I did find those threads about the timer glitches a little scary. . . plus id need five new rx's and I still don't like the way the feel as much as the JR stuff that I have.
Sorry for getting long winded. . . I do tend to do that. _________________ -Brett
Team Raven
www.waynehandley.com
Northern California Aerobatic Club
www.iac38.org
Last edited by 8KCABrett on Fri Feb 04, 2005 1:03 am; edited 1 time in total |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Thu Feb 03, 2005 11:02 pm Post subject: |
|
|
OK, I'm getting pretty sick of this FUTABA vs. JR crap!!! When is it gonna stop????  _________________ --Meyrick-- |
|
| Back to top |
|
 |
8KCABrett

Joined: 01 Feb 2005 Posts: 16
|
Posted: Fri Feb 04, 2005 12:59 am Post subject: Sorry Meyrick |
|
|
Hehe. . dont blame me. . I just asked what sub 300.00 radios do snap spoilerons!
Seemed innocent at the time.
Actually I do have two Berg 6 rx that have an automatic shift set up. . I guess with those I can run either type as long as they aren't the synth types. . . handy. . . _________________ -Brett
Team Raven
www.waynehandley.com
Northern California Aerobatic Club
www.iac38.org |
|
| Back to top |
|
 |
Butthead

Joined: 08 Oct 2004 Posts: 1054 Location: Belvidere, NJ
|
Posted: Fri Feb 04, 2005 5:06 am Post subject: |
|
|
its gonna stop RIGHT NOW!!!!! dude!!! just buy the friggin Futaba for 275.00 you dont need a module yet. if you ant one you can buy it. _________________ John Paragallo
WildHare RC Extra 330LX 36%/ZDZ 120
Hangar-9 Extra 260 27%/ZDZ 50
Futaba 9C |
|
| Back to top |
|
 |
Radioflyer

Joined: 14 Sep 2004 Posts: 344 Location: Kalamazoo, MI
|
Posted: Fri Feb 04, 2005 3:21 pm Post subject: |
|
|
Hey, does anybody use Hitech or Airtronics? This would certainly cut down on the JR Vs. Futaba I own both JR and Futaba, none of which can do snap spoilers, although the 6XAS will mix them and work when flipping the flaps switch. I had two fluke incidences happen w/ my Futabas last year, but I believe it was do to a charger that I used. I've never had a problem w/ my JR Max 4. It has been the most reliable ever owned. I would get either depending on the price. _________________ God bless us all, and keep us safe.
www.bryanhusk.com/jay |
|
| Back to top |
|
 |
ryan

Joined: 13 Dec 2004 Posts: 147 Location: North Carolina
|
Posted: Fri Feb 04, 2005 4:59 pm Post subject: |
|
|
| TeamMoki3D wrote: | | its gonna stop RIGHT NOW!!!!! dude!!! just buy the friggin Futaba for 275.00 you dont need a module yet. if you ant one you can buy it. |
Umm...
If you are talking about the RF module then it would kinda help if you got that with the radio- along with another RX if he were to go Futaba.
I think you can buy the 8103 TX only for like $150-160. The 8103 is a solid radio, it has alot of functionality. The 9303 is an awesome radio. I know that is out of your specified budget range, but it is truly incredible. If it were out when I got my 10X, I would have gone that route. Also, have you looked at the 378 7 channel?
I'm about tired of the everything is better than JR bullshit myself. I don't like it when I get slammed (not saying that anyone here did that, just making an example) because I fly JR. Or more specifically, that my radio is trash. Futaba is great- I've used a 9Z some, not really fond of Hitec for some reason, however I have flown some of their stuff and it's pretty nice. I haven't had any experience with Airtronics, but I imagine the Stylus is a decent radio. But pick one and go for it.
And as an aside-
Brett what class (full scale) do you fly? Do you own a Decathalon? They're fun airplanes.
Sorry if I got a little hot. It just kinda came out. _________________ Ryan |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 1316 Location: Fremont, CA
|
Posted: Fri Feb 04, 2005 5:02 pm Post subject: |
|
|
| Radioflyer wrote: | | Hey, does anybody use Hitech or Airtronics? |
I have an Airtronics RD6000 Super. It's a pretty good computer radio. Actually it's my first computer radio but now has it's limitation. The big plus about that radio is it can do both positive and negative shifting. Gonna put it up for sale soon though. _________________ --Meyrick-- |
|
| Back to top |
|
 |
3D-kid330

Joined: 14 Nov 2004 Posts: 391 Location: Fremont, CA
|
Posted: Fri Feb 04, 2005 5:26 pm Post subject: |
|
|
I agree, lets end it right here, right now.
If you want a great radio for your price range without having to change recievers, the 8103 is the way to go.
Ditto that on getting slammed, not on here but other places, when they say everything is better than what I have, I just turn it right back around.  _________________ Lower??!! |
|
| Back to top |
|
 |
8KCABrett

Joined: 01 Feb 2005 Posts: 16
|
Posted: Fri Feb 04, 2005 10:18 pm Post subject: |
|
|
Today we did the maiden flight on our scratch built heavy lift electric. . .it flew great. I used the Futaba 9TZAP that I have thus far only used for the tach function. . . it's pretty darn nice, heavy, but nice, smooth and comfy. . . not mine though :-/
I also tried out the 9C and 9303 in my LHS, and I couldn't fault either from a comfort perspective at all.
Ryan, I had around 9 Airtronics setups, but they were the old Vanguard VG6DR's I had many different Futaba 4 and 6's, and used one Hitec way back when. . . That was back when all you really saw where Futaba and Airtronics, so the Hitec brought in a lot of oohs and ahhs, though I didn't like it quite as much as the others. Now the only stuff I'm using is JR with mostly Hitec Servos and a couple Berg rxs for the foamies.
I have wondered about that 7 channel JR. . .X378 or whatever it is, but the guys at the hobby shop didn't seem to know what snap spoilerons were so that was a difficult conversation to get though. . . after I explained the idea to him he just told me that he didn't use it because he has "thousands of hours of experience [he] could feel the airplane so well that [he] would just kick the rudder at the right frequency to stop any wing rocking" and that when I "practice for a few years [I] might be able to do that too" When he was done with his little story I decided that his answer was best translated as "I don't know."
Oh and the full scale acro mounts I spend most of my time in are the SuperDecathlon, and the Extra 300L. I am limited to Sportsman and some Intermediate in the SuperD, but of course I am Unlimited in the Extra, though I don't compete at that level as the owner, Wayne Handley, has an insurance policy in that aircraft that specifies that he must be on board so I do freestyle when I am in that with him in the front getting thrown around. I can rent an Extra 200 (but have to suffer 100 less ponies), or Pitts S2C at the same facility that I rent the SuperD, but my set up in the 300L is hardly more expensive than renting these, but I will probably hop in the Pitts one of these days even though I am rather spoiled by the Extra 300L. _________________ -Brett
Team Raven
www.waynehandley.com
Northern California Aerobatic Club
www.iac38.org |
|
| Back to top |
|
 |
john wondra

Joined: 05 May 2004 Posts: 360 Location: auburn, wa
|
Posted: Sat Feb 05, 2005 7:02 am Post subject: |
|
|
sory ive been gone at a model expo. my friend got one and said he said 300 for the tx only....not sure where. meyrick you had to know this jr/futuba thing was gunna happen sooner or later i got another full 2 damn days at teh expo. the cealing is 10 feet i had an unlimited pilot fly my foamy yak 55 and he stufed it, total demelition job lol he remains nameless for his sake  _________________ John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs> |
|
| Back to top |
|
 |
| |