ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Funtana S 90 Construction Page
6 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Thu Dec 30, 2004 8:44 pm    Post subject: Funtana S 90 Construction Page  

Hi everyone, I built my FT90 back in Aug and took several photos of the construction which I have been meaning to post but have not. I have now placed them online in order to help others that may be putting a FT90 together and need a little assistance. There are 100 photos posted of the build.

The material and items used in the photos are my personal preference and does not indicate that the same material and items must be used on another plane. Personal choices are welcome for your plane.

Thanks,

Derrick (DTB)

Funtana S 90 Construction Page

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Tue Jan 25, 2005 2:28 am    Post subject:  

Dtb,
I don't know how I missed it the first time.Great construction page.I was looking at you pinned firewall and was wondering how that was done?Is it just holes drilled and dowels stuck in them?
Thx
Shaun

_________________
http://www.texomarc.org/
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Tue Jan 25, 2005 4:22 am    Post subject:  

Shaun wrote:
Dtb,
I don't know how I missed it the first time.Great construction page.I was looking at you pinned firewall and was wondering how that was done?Is it just holes drilled and dowels stuck in them?
Thx
Shaun


Shaun, that is exactly how it is done. Drill straight down. You can use small wooden dowels or small metal nails. I epoxied mine in place also. Seems to hold up nicely also.
A friend who has the Saito 150 on his FT90 mysteriously had his firewall pull out. It was a clean break. Really more of a pop off. Popped everything back in place with epoxy and tri-stock and we flew yesterday, but he still hasn't pinned it. Even if the pins are not needed, it still helps and only takes 10-20 minutes to do.



IMG_2551.JPG
 Description:
 Filesize:  80.42 KB
 Viewed:  155 Time(s)

IMG_2551.JPG



_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Tue Jan 25, 2005 6:10 am    Post subject:  

Thanks, I'm think about doing some beefing up on mine.
_________________
http://www.texomarc.org/
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 88
Location: UK

PostPosted: Tue Jan 25, 2005 6:16 am    Post subject:  

Sweet DTP, no doubt I'll be looking in while I'm building mine. Wink
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Tue Jan 25, 2005 5:02 pm    Post subject:  

Gezoid wrote:
Sweet DTP, no doubt I'll be looking in while I'm building mine. Wink


No problem, let me know if I can help anyway.

Good luck,
DTB

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive