| |
| Author |
Message |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Sun Dec 26, 2004 6:16 pm Post subject: torque rolling my ucando 46 |
|
|
I need some tips on torque rolling my ucando 46 do any of you know if this is a good plane for torque rolling . I have a 70 supass II on it. I have areoflight pro and can torgue roll a lot of planes on it until my thumbs are sore but when I fly my ucando I can hold a hover for about 15 to 20 sec and things just go to heck any suggestions would be appreciated.
Besst Regards
ucando2
|
|
| Back to top |
|
 |
Chris

Joined: 16 Apr 2004 Posts: 270 Location: Toronto, Canada
|
Posted: Sun Dec 26, 2004 7:28 pm Post subject: |
|
|
maybe try moving your cg ack
_________________ -Chris-
3D Foamy |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Sun Dec 26, 2004 7:33 pm Post subject: |
|
|
| Chris wrote: | | maybe try moving your cg ack |
Ok thanks Chris I will try that
|
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 685 Location: Sunnyvale, CA
|
Posted: Sun Dec 26, 2004 7:36 pm Post subject: |
|
|
If it is unstable in a hover, then it could be your CG, like Chris said. You might have thrust issues as well. Also, are you smooth on the throttle? Being smooth really helps a lot.
_________________ Zak West
Team DA
Desert Aircraft
Smart Fly
Fromeco Avionics
Stick and Rudder Photos |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Sun Dec 26, 2004 8:57 pm Post subject: |
|
|
| 3dbatixkid wrote: | | If it is unstable in a hover, then it could be your CG, like Chris said. You might have thrust issues as well. Also, are you smooth on the throttle? Being smooth really helps a lot. |
how do I know if I have thrust issues when you hover are you always working That throttle. or you just trying to hold it at a certain rpm?
Best Regards
BUZZ
|
|
| Back to top |
|
 |
Chris

Joined: 16 Apr 2004 Posts: 270 Location: Toronto, Canada
|
Posted: Sun Dec 26, 2004 8:59 pm Post subject: |
|
|
also only move your cg back like 1/4" at most as a time if that seems liek alot to you then 1/8" at a time not to much also when moving your cg back be cautious on the first flight wiht the new cg
_________________ -Chris-
3D Foamy |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Sun Dec 26, 2004 9:14 pm Post subject: |
|
|
[quote="Chris"]also only move your cg back like 1/4" at most as a time if that seems liek alot to you then 1/8" at a time not to much also when moving your cg back be cautious on the first flight wiht the new cg[/quote
]As for moving my cg back do I just put a couple of stick on lead weights under my stablizer I have some 1/4 oz. chunks like 1 on each side sorry if I sound stupid. but this is all new to me
|
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 923 Location: Fremont, CA
|
Posted: Sun Dec 26, 2004 9:31 pm Post subject: |
|
|
| ucando2 wrote: | | As for moving my cg back do I just put a couple of stick on lead weights under my stablizer I have some 1/4 oz. chunks like 1 on each side sorry if I sound stupid. but this is all new to me |
As much as possible try avoiding adding weight. First try moving your battery pack back about the lenght of the battery and so forth.
_________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Sun Dec 26, 2004 9:38 pm Post subject: |
|
|
| Meyrick wrote: | | ucando2 wrote: | | As for moving my cg back do I just put a couple of stick on lead weights under my stablizer I have some 1/4 oz. chunks like 1 on each side sorry if I sound stupid. but this is all new to me |
As much as possible try avoiding adding weight. First try moving your battery pack back about the lenght of the battery and so forth. |
Ok thanks Meyrick also are you always working that throttle in a hover
|
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 923 Location: Fremont, CA
|
Posted: Sun Dec 26, 2004 9:41 pm Post subject: |
|
|
| ucando2 wrote: |
Ok thanks Meyrick also are you always working that throttle in a hover |
Depends on your style. Either way works.
_________________ --Meyrick-- |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 685 Location: Sunnyvale, CA
|
Posted: Sun Dec 26, 2004 9:41 pm Post subject: |
|
|
| ucando2 wrote: | | 3dbatixkid wrote: | | If it is unstable in a hover, then it could be your CG, like Chris said. You might have thrust issues as well. Also, are you smooth on the throttle? Being smooth really helps a lot. |
how do I know if I have thrust issues when you hover are you always working That throttle. or you just trying to hold it at a certain rpm?
Best Regards
BUZZ |
Try to keep it at a constant throttle setting. You can tell if you have thrust issues if the trim in level flight changes with throttle settings. In a hover, it might tend to pull one way no matter the orientation. If you bolted the engine up square to the firewall, and everything is straight, it shouldnt be a problem.
_________________ Zak West
Team DA
Desert Aircraft
Smart Fly
Fromeco Avionics
Stick and Rudder Photos |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Sun Dec 26, 2004 9:54 pm Post subject: |
|
|
| 3dbatixkid wrote: | | ucando2 wrote: | | 3dbatixkid wrote: | | If it is unstable in a hover, then it could be your CG, like Chris said. You might have thrust issues as well. Also, are you smooth on the throttle? Being smooth really helps a lot. |
how do I know if I have thrust issues when you hover are you always working That throttle. or you just trying to hold it at a certain rpm?
Best Regards
BUZZ |
Try to keep it at a constant throttle setting. You can tell if you have thrust issues if the trim in level flight changes with throttle settings. In a hover, it might tend to pull one way no matter the orientation. If you bolted the engine up square to the firewall, and everything is straight, it shouldnt be a problem. |
Ok houston we have a problem the guy that built my plane put the battery pack under the gas tank so I think Iwill have to pull the engine to get the tank out. moving the battery that far back as opposed to where it is now is that going to screw with my trim setting ?
|
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 923 Location: Fremont, CA
|
Posted: Sun Dec 26, 2004 10:49 pm Post subject: |
|
|
| ucando2 wrote: | | Ok houston we have a problem the guy that built my plane put the battery pack under the gas tank so I think Iwill have to pull the engine to get the tank out. moving the battery that far back as opposed to where it is now is that going to screw with my trim setting ? |
It may or may not. If move it too far back, the plane will start to climb up so you may need to give it some down trim.
_________________ --Meyrick-- |
|
| Back to top |
|
 |
Shane
Joined: 26 Dec 2004 Posts: 13
|
Posted: Sun Dec 26, 2004 11:00 pm Post subject: |
|
|
Hi,
I too am in the same boat as you. I have an GP Extra 300s .40 I built from a kit, and have been flying it for about 2 weeks and it balanced right on at 4"... But it is too nose heavy to wall, or hover. I put the battery back where the reciever was and the reciever where the battery was. I am however not sure how this thing is going to handle, it was a big jump to move the battery (around 4-5")...
Anyone help me out?
Thanks
I hope the pic explains it better.
Shane
| Description: |
|
| Filesize: |
157.74 KB |
| Viewed: |
166 Time(s) |

|
|
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 424 Location: Belvidere, NJ
|
Posted: Mon Dec 27, 2004 9:01 am Post subject: |
|
|
unless you have about 45-50 degrees of throw and a LOT of power, (about a saito 1.00 for that plane) then moving your CG back a bit should help, maybe 4 1/4 or 4 1/2. what is your setup?(engine, weight, radio, etc...)
_________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
Shane
Joined: 26 Dec 2004 Posts: 13
|
Posted: Mon Dec 27, 2004 9:11 am Post subject: |
|
|
Plane is 6 lbs dry, engine is OS 46AX with APC 12.25x3.75.. Which is enough... i can hang it by the prop for 1-2 seconds at 3/4 before things go to hell, and it has pull out. Radio is a Futaba 7C.
Saito 1.00? Maybe if I was rich! |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 871 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 9:24 am Post subject: |
|
|
It's gonna be tough to tork roll a .40 scale aerobatic plane because of a wing loading. When you try to do a wall, it will most likely to fall on one side of the wings. Plus you need at least a 2 to 1 power to weight ratio. This would be the wrong plane to learn torque rolling. For .46 size glow engines, I would recommend getting a profile airplane. They are designed for 3D. _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 11:01 am Post subject: |
|
|
| TeamMoki3D wrote: | | unless you have about 45-50 degrees of throw and a LOT of power, (about a saito 1.00 for that plane) then moving your CG back a bit should help, maybe 4 1/4 or 4 1/2. what is your setup?(engine, weight, radio, etc...) |
and a LOT of power, (about a saito 1.00 for that plane) then moving your CG back a bit should help, maybe 4 1/4 or 4 1/2. what is your setup?(engine, weight, radio, etc...)[/quote]
I have a o.s 70 supass II on my ucando 46.With a 14x4w apc prop.She has a good pull out of a hover.MY CG is right on 4 1/2. Radio is the futaba 7C On high rates Iam running 65%expo on the aileron 30% on the rudder and 40% on the elevator. {Is that right?} Futaba S3004 servos on the ailerons and both elevator halfs and futaba S3010 high torq servo on the rudder.How do you check the degrees of throw? {never did really understand that one }I know I have a ton of throw on high rates.
PS The only thing I don"t like about the 7C is Iam not runing a Y harness or a servo revevser on my elevator halfs and while this does work when I try to trim the plane only one of the elevator halfs move. So the only way to trim the elevators is manually on the ground. I contacted futaba and they said that it replaced the 6XAs and they did not program that feature into this radio.And I woluld have to buy the 9C if I wanted that feature.
BUZZ |
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 379 Location: Belvidere, NJ
|
Posted: Mon Dec 27, 2004 11:35 am Post subject: |
|
|
sorry for the confusion, i was saying to use a saito 1.00 for the GP extra 300 .46 size.. not for a ucando, i have a saito .72 in mine and it flies great but barely a pull out. to measuer degrees you can convert inches to degrees or buy a degrees meter for models, great planes sells one on www.greatplanes.com _________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
TeamMoki3D

Joined: 08 Oct 2004 Posts: 379 Location: Belvidere, NJ
|
Posted: Mon Dec 27, 2004 11:48 am Post subject: |
|
|
what channel is your secondary half plugged into?.. if you can, plug it into channel 5, then assign channel 5 to your rotary knob and use that as the trim for it.. this may not work but it does on the 9c. if it doesnt then just buy a reversable y harness from cermark! they are like 2 bucks! _________________ "uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!" |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 12:00 pm Post subject: |
|
|
| TeamMoki3D wrote: | | what channel is your secondary half plugged into?.. if you can, plug it into channel 5, then assign channel 5 to your rotary knob and use that as the trim for it.. this may not work but it does on the 9c. if it doesnt then just buy a reversable y harness from cermark! they are like 2 bucks! |
Thanks for the info TeamMoki3D Iwill try that |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 676 Location: Sunnyvale, CA
|
Posted: Mon Dec 27, 2004 12:32 pm Post subject: |
|
|
| ucando2 wrote: |
PS The only thing I don"t like about the 7C is Iam not runing a Y harness or a servo revevser on my elevator halfs and while this does work when I try to trim the plane only one of the elevator halfs move. So the only way to trim the elevators is manually on the ground. I contacted futaba and they said that it replaced the 6XAs and they did not program that feature into this radio.And I woluld have to buy the 9C if I wanted that feature.
BUZZ |
Are your elevators linked via a PMix in the radio? If so, you need to turn on the TRIM option, which should make them trim together. I havent had a chance to mess with a 7C. Meyrick could tell you more since he has one. _________________ Zak West
Team DA
Desert Aircraft
Smart Fly
Fromeco Avionics
Stick and Rudder Photos |
|
| Back to top |
|
 |
3dbatixkid Moderator

Joined: 15 Apr 2004 Posts: 676 Location: Sunnyvale, CA
|
Posted: Mon Dec 27, 2004 12:35 pm Post subject: |
|
|
| Shane wrote: | Hi,
I too am in the same boat as you. I have an GP Extra 300s .40 I built from a kit, and have been flying it for about 2 weeks and it balanced right on at 4"... But it is too nose heavy to wall, or hover. I put the battery back where the reciever was and the reciever where the battery was. I am however not sure how this thing is going to handle, it was a big jump to move the battery (around 4-5")...
Anyone help me out?
Thanks
I hope the pic explains it better.
Shane |
Dunno if anyone got around to answering this, but that is not too far back to move the battery. If you are really worried, add some more expo to the elevator, or bring the throw down a bit. The biggest thing to watch for is the elevator being sensitive. With that you get the high speed stall that results from pulling a LOT of elevator at high speeds. So be careful and test it out up high. _________________ Zak West
Team DA
Desert Aircraft
Smart Fly
Fromeco Avionics
Stick and Rudder Photos |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 871 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 12:43 pm Post subject: |
|
|
| 3dbatixkid wrote: |
Are your elevators linked via a PMix in the radio? If so, you need to turn on the TRIM option, which should make them trim together. I havent had a chance to mess with a 7C. Meyrick could tell you more since he has one. |
I don't think the 7C offers a trim option on the pmixes and it does not offer Ailevators program. Unfortunately this is what Futaba has to say.
http://www.futaba-rc.com/faq/faq-7c-q763.html _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 12:50 pm Post subject: |
|
|
| Meyrick wrote: | | 3dbatixkid wrote: |
Are your elevators linked via a PMix in the radio? If so, you need to turn on the TRIM option, which should make them trim together. I havent had a chance to mess with a 7C. Meyrick could tell you more since he has one. |
I don't think the 7C offers a trim option on the pmixes and it does not offer Ailevators program. Unfortunately this is what Futaba has to say.
http://www.futaba-rc.com/faq/faq-7c-q763.html |
I think Meyrick is right cause no matter what I try nothing seems to work |
|
| Back to top |
|
 |
Meyrick Site Admin

Joined: 15 Apr 2004 Posts: 871 Location: Fremont, CA
|
Posted: Mon Dec 27, 2004 1:00 pm Post subject: |
|
|
A reverser device should work fine with trims but if you want to get accurate. You can get the Smartfly's Equalizer II. It will match and can reverse each servo. Perfect for split elevator servos.
http://www.smart-fly.com/Products/EqualizerII/equalizer.htm _________________ --Meyrick-- |
|
| Back to top |
|
 |
ucando2
Joined: 26 Dec 2004 Posts: 21
|
Posted: Mon Dec 27, 2004 1:24 pm Post subject: |
|
|
Ok Thanks Meyrick never seen one of those. |
|
| Back to top |
|
 |
Radioflyer

Joined: 14 Sep 2004 Posts: 121 Location: Kalamazoo, MI
|
Posted: Mon Dec 27, 2004 2:04 pm Post subject: |
|
|
I have a GP Extra 300S and mine won't go unlimited w/ a TG pro .46 and a APC 12.25x3.75. It's a bit heavier than most but I can't see even a lite one flying 3D. I think that the wing is far to thin to do walls w/out snapping off to one side or the other. Also the elevator and rudder are a bit small for good authority. And I hope that you replaced the ailerons because those little stripps aren't going to cut it in a hover I love to proven wrong in this type of situation, so good luck Remember not to go to far back on this plane w/ the C.G. or it will become very uncontrolable. _________________ God bless us all, and keep us safe. |
|
| Back to top |
|
 |
| |