ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Aeroworks 29% Katana
37 of 73 posts archived
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Thu Dec 23, 2004 7:14 pm    Post subject: Aeroworks 29% Katana  

I just got the plane and it it is extremly nice. It is packaged so well and everything came in one piece...well not broken at least. The airframe is very nicely built and it is VERY light. There is lightning holes everywhere, it is amazing. The thing is a work of art! The landing gear is ''polished''. (Doesn't look like "sand").
The covering is ok. At least they actually folded over the edges, the edges they cut are kinda done by hand, but it looks good other than that.

It was on sale for 250 bucks off. I paid 350 for it. This is the really bitchen part. I DID NOT order a $30 instrument pannel or a $25 Graph Tech tail wheel...and it did not say I was going to get one. And it came with the plane. These were the two items that I really wanted to get but couldn't because I am broke. Cool Exclamation

Now I just need to order all of the anoying junk, like servos, rods, arms and horns, etc. I will see if I can get some pics up after it is done in a few weeks.

_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)


Last edited by Tom Uhlendorf on Sat Feb 19, 2005 9:39 am; edited 1 time in total
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 424
Location: Belvidere, NJ

PostPosted: Thu Dec 23, 2004 8:22 pm    Post subject:  

niceeee Cool weight should be around 16 pounds on that thing.. saw a review on google.com somewhere, guy had a DA-50 in it and it rocked!
_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Thu Dec 30, 2004 1:04 am    Post subject:  

Ok, I ordered all the stuff three nights ago from tower and it should all be here on the fourth. I still need some Nelson ball links and some stuff from Fromeco and Smart-Fly.

Here is my setup:

-Da 50 w/ Slimline smoke muffler.
-Menz 22x8
-Hitec 5945s all around
-Futaba 3001 on throttle
-Fromeco Batteries & Regs.
-Smart-Fly switches and cut off
-Nelson horns and ball links
-Dubro 4-40 rods
-SWB servo arms all around (x throttle)
-Dubro HD cotter hinges
-PSP fuel dot
-Sullivan skywriter smoke pump with Superdri oil
-Tru-Turn 3.5'' lightened, menz cut spinner
-Graphtech 15ilb tailwheel

_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Thu Dec 30, 2004 1:19 am    Post subject:  

Today got a chance to put some work into this thing so I ironed the wrinkals out of my wings. They did an awsome job on this plane. It is sooo nice.

While working on the wings I ran into my first snag. The hardwood block in the aileron for the horn is almost right under the servo hole. But my dady found out a way to get it to work on his cad program so we can get the throw. It should work PERFECT, but it looks really funky. If anyone has any trouble with this, PM me and can send the drawing and dimensions to you.

Later on tomarrow, I will get the wings all hinged and get the horns mounted. Basically get the wing done and ready for the servos do just screw on.
Besides that SMALL horn block issue, this plane is really nice.

_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Thu Dec 30, 2004 5:48 am    Post subject:  

How about some pictures bro??
_________________
--Meyrick--
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Thu Dec 30, 2004 9:55 am    Post subject:  

Ya, I really need a didgital camera huh? Shocked My friend has one I can probebly use. I will take some when the wing is done and when the whole plane is done.
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Thu Dec 30, 2004 9:18 pm    Post subject:  

Woops, my bad. The wings aren't getting hinged until I get the hinges along with all of the other items from Tower. Mr. Green
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Thu Dec 30, 2004 9:40 pm    Post subject:  

Anyway, I started to measure where the hinges were going to go and noticed that the slots they made are actually evenly spaced out. Ok, so on one wing they were. Then I held up the ailerons and put them together with the mock up CA hinges they give you, and they were the same. Dancing This must be the first arf that I have built that is so nicely built. The first arf I have also seen that they actually measured and cut...nicely made cuts. Makes building a lot faster and easier. WOW!
So, what I did was put all eight, this is going to be fun Rolling Eyes , hinges into one aileron and "hinged" it to the other. Then made sure that the ends were matched up then marked the center of the hinge onto the aileron. After this I "hinged" the ailerons to the wings, then transfered the marks to the wing. Now I am set, and ready to notch out the groves and glue in the real hinges.

P.S. I have herd that Gorrila Glue expands when it cures. So when hinging it pops off the sheeting or makes a little bump on the surface around the hinge. Have any of you guys hade trouble with this?
I have been just useing RC 56 and it works awsome. Should I just stick to this or go to the Gorrila Glue?

_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Flatlandmike



Joined: 29 Oct 2004
Posts: 22

PostPosted: Thu Dec 30, 2004 9:49 pm    Post subject:  

my garilla glued hinges where just fine Smile
_________________
www.lmacky.org
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Sat Jan 22, 2005 6:26 pm    Post subject:  

Well I am kind of moving slow...this girlfriend thing really does slow you down doesn't it? Rolling Eyes

Anyway, I just used RC56 on the hinges. It is enough for sure because there is eight hinges in each aileron Surprised . And I did a REALLY good job on it so it looks REALLY nice and clean. Cool I got eveything done on the wing but the pushrods because I am waiting for some nelson ball links. And the wing retention is the same as Sausy's.

So what I have done while waiting is:
-Ironed everything
-Had Pops make some measurments for the horn mounting and engine mounting
-Got all of the goodies from smart-fly and Fromeco. (BTW, I went with the Smart-Fly regulators)
-And got all of the electronics wired up, got the regulators set, and ready to go in the plane.


But, I am in no big hury to get those ball links yet since there is a lot to do on the fuse.

_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 424
Location: Belvidere, NJ

PostPosted: Sat Jan 22, 2005 7:00 pm    Post subject:  

Tom Uhlendorf wrote:
...the wing retention is the same as Sausy's.

Applause Applause Applause Applause Applause glad to see you switched the retention to my way. the way they had it set up is pointless.

_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Sat Jan 22, 2005 7:09 pm    Post subject:  

Yeah, it works really good. I did basically the same thing on the other Katana and I liked it better. The difference was that there was screws coming out of the wing and into the fuse. I thought that it was just a little "beefier". Then to hold it just use knobs or wingnuts. But I couldn't do it this time because I couldn't get a screw in the wing. But your way is easier and simpler. Cool
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 424
Location: Belvidere, NJ

PostPosted: Sat Jan 22, 2005 7:31 pm    Post subject: Re: Aerworks 29% Katana  

just realized this but...
Tom Uhlendorf wrote:

Now I just need to order all of the anoying junk, like servos, rods, arms and horns, etc. I will see if I can get some pics up after it is done in a few weeks.

yeah, thats all the anoyying stuff right? the stuff that makes the plane harder to fly Razz Rolling Eyes

_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 368
Location: Morgan Hill, CA

PostPosted: Sat Jan 22, 2005 7:50 pm    Post subject:  

Eh? I don't get the joke though. That is the "anoying" stuff that makes the damn thing fly. Laughing
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
TeamMoki3D



Joined: 08 Oct 2004
Posts: 424
Location: Belvidere, NJ

PostPosted: Sat Jan 22, 2005 8:36 pm    Post subject:  

im being sarcastic. it HELPS the plane fly, and meanwhile you say "the anoying stuff, the stuff that makes the plane fly"....catch my drift?? i was just jokin Razz Razz Laughing
_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
15 posts here were not archived
TeamMoki3D



Joined: 08 Oct 2004
Posts: 393
Location: Belvidere, NJ

PostPosted: Mon Jan 24, 2005 5:22 am    Post subject:  

ANTHING would would FFD. in fact, on my cap 232(27%), my gaps are sealed with Scotch brand tape. works just as good as clear covering. the only thing is that you have to replace it about 2 times a season which can be a pain since it gets realy gummy from the glo fuel.
hope this helps! Smile

_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Flying French Dude



Joined: 29 Dec 2004
Posts: 37

PostPosted: Mon Jan 24, 2005 6:48 am    Post subject:  

Razz Razz Razz

thanks for reply

FFD

_________________
any landing your plane survive in one peice ...
is a good landing
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 355
Location: Morgan Hill, CA

PostPosted: Thu Feb 03, 2005 11:55 am    Post subject:  

Ok. Finally got my own digital camera. But it sucks really bad! It is this tiny little thing I traded for some old s**t with my friend. But it works. So, I try to get some pics soon. My dad is sick and he left his lap top at work so I can't get the pics on any computer yet. Maybe tomarrow or Monday.
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 355
Location: Morgan Hill, CA

PostPosted: Thu Feb 03, 2005 12:00 pm    Post subject:  

Mmmm. I going to post some Monday because then I will have both the stab and the wing done.

Oh yeah...speaking of the wing. Pops calles Nelson up and told him about my ball links I have been waiting for from the start, and he shipped them out that day with free first class shipping and a 10% discount for the wait. Cool

_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 355
Location: Morgan Hill, CA

PostPosted: Thu Feb 17, 2005 9:42 pm    Post subject:  

Sorry for the wait. Had some stuff to do. Also did a little more like mount the rudder servo and glued the vertical stab in. Also, there was know way to get them posted by Monday because stuff showed up late as usuall. Rolling Eyes

Here you go...finally.



Photo001.jpg
 Description:
Here's my baby so far....well the fuse part.
 Filesize:  39.52 KB
 Viewed:  32 Time(s)

Photo001.jpg



_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)


Last edited by Tom Uhlendorf on Thu Feb 17, 2005 9:47 pm; edited 1 time in total
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 355
Location: Morgan Hill, CA

PostPosted: Thu Feb 17, 2005 9:43 pm    Post subject:  

...


Photo2001.jpg
 Description:
HUGE elevators!
 Filesize:  30.27 KB
 Viewed:  31 Time(s)

Photo2001.jpg



_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 355
Location: Morgan Hill, CA

PostPosted: Thu Feb 17, 2005 9:46 pm    Post subject:  

...


Photo3001.jpg
 Description:
Rudder servo mounted with SWB's new clamped arm. Note all of the lightning holes, that's not even close to half of them. :D
 Filesize:  44.64 KB
 Viewed:  30 Time(s)

Photo3001.jpg



_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 355
Location: Morgan Hill, CA

PostPosted: Thu Feb 17, 2005 9:49 pm    Post subject:  

...


Photo4001.jpg
 Description:
Aileron geometry. Little funky LOOKING, but it works REALLY well.
 Filesize:  25.66 KB
 Viewed:  28 Time(s)

Photo4001.jpg



_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 355
Location: Morgan Hill, CA

PostPosted: Thu Feb 17, 2005 9:54 pm    Post subject:  

This is the wing mounting system. The screws are right above the tube. It screws in from the inside of the fuse into threaded inserts in the wing.


Photo5001.jpg
 Description:
The black thing is the nylon screw.
 Filesize:  34.11 KB
 Viewed:  27 Time(s)

Photo5001.jpg



_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
21 posts here were not archived
team chula vista



Joined: 10 Feb 2005
Posts: 51
Location: san diego

PostPosted: Sat Mar 19, 2005 11:23 am    Post subject:  

cool!!! thats pretty light for a 29%
_________________
the only type of flying is 3d flying
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 337
Location: Toronto, Canada

PostPosted: Sat Mar 19, 2005 12:45 pm    Post subject:  

mr team thats not that light it's the right weight for that size...a katana is a small airplane compared to endges and extras 28% edge = same size as 29% katana so that weight is about right.
_________________
-Chris-
3D Foamy
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 639
Location: Belvidere, NJ

PostPosted: Sat Mar 19, 2005 7:55 pm    Post subject:  

Tom Uhlendorf wrote:
Drool Drool
Engine is getting mounted tonight because the tri stock for the engine box was balsa and I decided to go spruce. So I had to buy some and cut it. Then the cowl, then gear. The rest is super easy. Maybe after school next week or something.

ok tommy boy!! get this damn thing done already. tomorow i should have my Extra done with everything except the servo arms. that takes about an hour or two for me. my arms are coming this week. ill have this 35% extra done this weekend! Shocked hurryyyy!!!!! Laughing

_________________
"get outta there beavis i want the window seat!!!"
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 447
Location: Morgan Hill, CA

PostPosted: Sun Mar 20, 2005 9:05 am    Post subject:  

*In a gay voice*
Well! OMG! I am justh stho greatlyy jealousth!

_________________
No Butthead! The window seat is mine!
...Now I get to see all the hot babes.
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 639
Location: Belvidere, NJ

PostPosted: Mon Mar 21, 2005 7:12 pm    Post subject:  

so, whats the deal boy? hows this tana goin?
_________________
"get outta there beavis i want the window seat!!!"
Back to top  
fly boy 1



Joined: 12 Nov 2004
Posts: 94
Location: Milwaukee,WI

PostPosted: Mon Mar 21, 2005 7:27 pm    Post subject:  

Jeez Tom, I'll have my 87" Extreme Flight Yak ready to go before before the tana. I'm still in the process of talking my mom into it Confused .
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 447
Location: Morgan Hill, CA

PostPosted: Mon Mar 21, 2005 8:13 pm    Post subject:  

It's going good.
_________________
No Butthead! The window seat is mine!
...Now I get to see all the hot babes.
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 639
Location: Belvidere, NJ

PostPosted: Tue Mar 22, 2005 4:51 am    Post subject:  

Rolling Eyes where are you in the building process. UPDATES HERE!!! Smile
_________________
"get outta there beavis i want the window seat!!!"
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 195
Location: Queens, NY

PostPosted: Tue Mar 22, 2005 7:00 am    Post subject:  

Laughing By the time your done, I'll have a Carden and a jet. Laughing Rolling Eyes
_________________
Lower??!!
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 639
Location: Belvidere, NJ

PostPosted: Tue Mar 22, 2005 3:11 pm    Post subject:  

your getting bashed out here tom Laughing get the damn thing done already!
_________________
"get outta there beavis i want the window seat!!!"
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 447
Location: Morgan Hill, CA

PostPosted: Tue Mar 22, 2005 5:55 pm    Post subject:  

Yeah, yeah sure. Whatever.
Its getting worked on everyday. Just VERY slowly. It will be done SOON!

_________________
No Butthead! The window seat is mine!
...Now I get to see all the hot babes.
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 639
Location: Belvidere, NJ

PostPosted: Tue Mar 22, 2005 5:56 pm    Post subject:  

hello, mcflyyyyy?!?! give us an update here! Laughing lol Razz
_________________
"get outta there beavis i want the window seat!!!"
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 447
Location: Morgan Hill, CA

PostPosted: Tue Mar 22, 2005 10:35 pm    Post subject:  

Oh... Oh yeah. Cowl is almost done and then the landing gear and elctronics.

The cowl should be done tomorrow. Cool

_________________
No Butthead! The window seat is mine!
...Now I get to see all the hot babes.
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive