ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

I have flown...and it was good!
5 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
skwarwheels



Joined: 23 Nov 2004
Posts: 17

PostPosted: Wed Dec 08, 2004 10:52 pm    Post subject: I have flown...and it was good!  

I just wanted to let all you helpful people out there in 3dbatix Land know that I got to the field a couple of times this weekend!

Just to refresh your memory, I'm well past the beginer stage on a sim, and I've got some heli experience, but I'm a super noob when it comes down to an actual real RC airplane. Anyway, I got the Ugly Stick put together, got the servo's going the right way, trainer cord plugged in, and off we went.

It was pretty windy, so the plane was all over the place, and it seemed as if my instructor had me flying at about 10,000 feet (we were like maybe 150 crashes high...hehe!) Even so, I had a great time, and didn't even dumb thumb once! (figure 8's at 10,000 feet can be challenging!) Very Happy

I know one thing...I HATE looking at the bottom of a plane way up there. I can't see...nothing! I've made the mistake of having all of my sim time down on the deck, and it is not the same!

My instructor said that I was 2 to 3 weekends ahead of "schedule" and would be solo'ing in no time. I suspect it will be a bit more before I'm down on the deck for real though. The other thing I wasn't prepared for was all the crashes. Not mine...everyone elses! There were planes going in near me, landing gears failing... all kinds of stuff. I wonder if any of the new sims out there have a flying shrapnel option? Shocked

I want to thank Bill Johnson from Bayside RC for taking me up and being so great with me! Also thanks again to Mike West for talking me into actually learning how to fly before I go crazy with the 3D stuff!

Airplanes are cool! You know, I have several heli friends that would probably cease being friends if they saw that I wrote that...good thing I got all these new airplane friends to make up for them!!!

Thanks for all the help!
Michael

p.s. I almost forgot... Zak showed up with a big forty something Katana (I think), so I finally got to watch him fly...

He did pretty good too! (hehe!!!!!!)
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 207
Location: texas

PostPosted: Thu Dec 09, 2004 7:33 am    Post subject:  

Congrats!!! It just gets better!! Alittle advise though Wink You might want to get another job, It gets more expensive the lower you fly Laughing .
_________________
http://www.texomarc.org/
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 869
Location: Fremont, CA

PostPosted: Thu Dec 09, 2004 7:44 am    Post subject:  

That's cool man. Bayside's solo test should be pretty easy for ya. You take off and land 3 times and you're soloed. Just keep flying on the sim when you are not at the field and you'll solo quicker than you think. Dancing
_________________
--Meyrick--
Back to top  
Flatlandmike



Joined: 29 Oct 2004
Posts: 20

PostPosted: Thu Dec 09, 2004 2:33 pm    Post subject:  

good job man. that sim is the best thing ever i did the same as you a year ago learned to fly on the sim and soloed on beginning of my third day flying although that was about 60 hours on the sim cause we had bad weather for a week and after 3 months had rolling harriers going good but after a year and 2 months of exp under my belt I'm doing rolling harriers circles on the deck with no fear and complete control cross your fingers no crashes the only thing so far is clipped landing gears on the funtana 40 but they come off if you sneeze on them Razz
_________________
www.lmacky.org
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 185
Location: Jackson, MS

PostPosted: Fri Dec 10, 2004 10:14 am    Post subject:  

Congrats dude. This is only the beginning for you.
_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive