ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Funtana 90 with Saito 180...WOW!
5 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Montgomery



Joined: 07 Dec 2004
Posts: 4
Location: Tampa, Florida

PostPosted: Tue Dec 07, 2004 5:23 am    Post subject: Funtana 90 with Saito 180...WOW!  

So what do you think? Everyone I talk to about this say's Go For It!
I know its a little much but thats what throtle management is all about, right? Balanceing was not a problem as I put heavy duty servos in the tail, and the plane came out perfect. Never had or flown a Funtana 90. What can I expect witn a Saito 180 & APC 16-4 prop?
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 207
Location: texas

PostPosted: Tue Dec 07, 2004 5:48 am    Post subject:  

I have the satio 100 in mine. It is a "floater" with the 100 in it Smile!!
It has to be the best flying plane for me yet. Wink
As far as the saito 150 or 180 I believe it depends on the pilot.
With my 100, it could use just a little more omph....to pull out, and on the vertical!!!! Cool

On mine I had to move the throttle servo inside the fire wall.(similar to Zak's).
I placed my battery on the outside of the firewall. And I moved the rudder servo up to the middle of the plane and made a pull-pull out of it!
I did this because with the 100 it came out tail heavy.
With the larger motor's weight increase, I bet you wont have to do all this!! Idea

I believe you will be fine as long as you practice "throttle management".
One of these days I believe Zak is going to finish his, and fly it . Rolling Eyes I wouldn't hold my breath If I were you though Laughing !!!!!!!

_________________
http://www.texomarc.org/
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 866
Location: Fremont, CA

PostPosted: Tue Dec 07, 2004 8:15 am    Post subject: Re: Funtana 90 with Saito 180...WOW!  

Montgomery wrote:
What can I expect witn a Saito 180 & APC 16-4 prop?


The Sai180 will rip the 16x4 apart. Try the APC 17x4W or an 18x6W.

_________________
--Meyrick--
Back to top  
-3de-



Joined: 25 Sep 2004
Posts: 32
Location: Reno----911

PostPosted: Tue Dec 07, 2004 9:18 am    Post subject:  

I have a 180 on mine. APC 18x6w.
Great combo.
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 345
Location: Morgan Hill, CA

PostPosted: Tue Dec 07, 2004 9:38 pm    Post subject:  

Ya...Don't you use a 16x4 on the 100?
_________________
Hey Butthead! (he hehe hehehehehehehe) I figured somthing out too... (he he)I need T.P. for me bunghole! (yeah...!)
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive