ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Hitech Servo's?
19 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
Gezoid



Joined: 24 May 2004
Posts: 85
Location: UK

PostPosted: Sun Nov 21, 2004 12:41 pm    Post subject: Hitech Servo's?  

Hey guys, what's the dope on Hitec servo's? Just had a look at the Servo City website and then checked the UK model shop websites and can save plenty over Futaba equivelants.

Servo's I could use are:

HS945 MG coreless

HS5945 MG digital/coreless

HS6985 HB digital/coreless

Are they any good, or am I wasting my time lookin at them?

Thanks
Back to top  
Kyle Woyshnis



Joined: 04 May 2004
Posts: 77

PostPosted: Sun Nov 21, 2004 4:58 pm    Post subject:  

I use the 5945 digitals. work good for me so far. I had one lock up because i had powerflights without regulator. Embarassed so i had 8 volts going into them. but once i put regulators in it was problem free for the servos.
_________________
Kyle Woyshnis

www.kyle.macapple.com
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 85
Location: UK

PostPosted: Mon Nov 22, 2004 2:27 am    Post subject:  

Jeez Kyle, 8 volts!! Shocked

Yeah, heard a few horror stories about them. The dealer I got my Edge from offered me a good price on Futaba 9206's, but boy, it's a lotta loot. Some say Hitec are all good, some say exactly the opposite. I dunno. The plane I'm putting them in has cost a pile including a BME gasser so I'll probably play safe and get the Futaba's. I'm gonna try the Hitec digi's in something a little less expensive and see how we go. Smile

BTW Kyle, nice Funtana 90 video, enjoyed that, never seen harrier rolls so low in my life, let's have some more. Wink
Back to top  
Maffi



Joined: 21 Oct 2004
Posts: 16
Location: Germany / Hell HQ =)

PostPosted: Mon Nov 22, 2004 10:18 am    Post subject:  

Heyas !

i guess its the funny the nice movie with the funny song Twisted Evil
yep nice flying man !!!! the low harrier rolls ,really impressed me
give us some more Laughing

im going to build my CA 27% xtra with HS5945 on all uses (not gas Razz )

wanted to try the 6985 but noone has any test uses or expierience with it
so i will stay with the used 5945s !

Greetz
Back to top  
Kyle Woyshnis



Joined: 04 May 2004
Posts: 77

PostPosted: Mon Nov 22, 2004 2:22 pm    Post subject:  

thanks guys, glad you liked the video. i am relaly starting to fly the funtana 90 a lot more, so i will see if i can get another video soon.

I dont blame you for playing it safe. i'm sure not working with them before and then hearing all the stories makes you wonder. Better safe than sorry. Wink


Here are some other videos. Very Happy

http://pitsbrosmedia.com/videos/Kyleblenderchicken.wmv

http://pitsbrosmedia.com/videos/KyleFuntana40Fun.wmv

http://www.skypyro.rchomepage.com/html/kyleIMAC.wmv

_________________
Kyle Woyshnis

www.kyle.macapple.com
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 85
Location: UK

PostPosted: Tue Nov 23, 2004 9:11 am    Post subject:  

Hey Kyle, already had the IMAC video. Chicken blenders were cool Very Happy
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 367
Location: Morgan Hill, CA

PostPosted: Tue Nov 23, 2004 5:08 pm    Post subject:  

I would NOT USE THEM. I had a hanger9 edge with 5625s that had the airlerons lock up and stop working for about three seconds. Then about three months later the elevator went to lunch and ended the life of my edge. Then just last weak I was flying my dads' h9 cap w/ 5625s and I did a lump-shi-vok Embarassed , and the ailerons did the same and it did kind of a slip for three seconds and then came back.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Tue Nov 23, 2004 6:10 pm    Post subject:  

I used the HS5945 on my 1/3 Sukhoi. I've had a couple of servo lockups after turning on the on/off the switch. I'd either recycle the power on and off or tap on the control surface to unlock it. Luckily they happened on the ground. No incident in the air. My ATV was set to 120.
_________________
--Meyrick--
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 269
Location: Toronto, Canada

PostPosted: Tue Nov 23, 2004 7:58 pm    Post subject:  

yes the older hitecs were said to have many problems when set to anything over 100% atv but the new ones are said not to have the problems i plan on ordering a bunch of 5645's
_________________
-Chris-
3D Foamy
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 923
Location: Fremont, CA

PostPosted: Tue Nov 23, 2004 10:50 pm    Post subject:  

I checked the date of my 5945s and they were newer than what was described on Hitec's website. The problem was on the 5600 series dated before May 2002 and anything above 125 ATV would cause problems. This is what's on their website.

Important Information Regarding Digital Servos

While Hitec strives to deliver high quality products that work universally with a wide variety of other manufacturers equipment we occasional run across a compatibility issue with products other than our own.

In light of this it has come to the attention of Hitec, that our digital servo product manufactured prior to October 2001 may act erratically when used with a non Hitec computer radio where the user has programmed the ATV settings beyond 125%.

As a result of this finding Hitec would like to extend an offer to all owners of our digital servos built prior to October 2001. If your servo has the following identification labels on it, they will qualify for this free reprogramming service.

Hitec strongly recommends that all digital servos with the date codes listed below be reprogrammed with the latest software regardless of application or intended use.

The affected servos are labeled as"Modified" with the dates listed below:
APR2001
MAY2001
JUNE2001
JULY2001
AUG2001
You can return your servos to the Hitec service department for reprograming with the latest software version, or you can upgrade the servo software yourself, using the RESET function of the Hitec HFP-10 Digital Servo Programmer with software version, 1.03 or higher. This will "update" your servo and should fix any known conflict with the non-Hitec equipment.

Additionally any HFP-10 programmers that contain a software version earlier than version 1.03 can be upgraded free of charge by by returning it to our service department in Poway, California.

_________________
--Meyrick--
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 85
Location: UK

PostPosted: Wed Nov 24, 2004 8:30 am    Post subject:  

Hey, good one Meyrick. Finally, the truth of the matter. Bit late for me cos I already ordered the 9206's Rolling Eyes But, WTH, I'm happy with my choice even though I have to put a rock on my wallet to stop it floating away...

So, given that there's a cure for the Hitec digital problem, what are they like for longevity? Or did ALL the models equipped with them bite the dust!? Smile

Gez
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 85
Location: UK

PostPosted: Thu Nov 25, 2004 8:34 am    Post subject:  

Update:

The supplier let me down on the 9206's so I went to a local(ish) heli' store for them. While there I noticed he had 9151 digitals (Futaba) for only £9 apiece more, so I bought them instead.

Now, when I get home I notice on the box, "Ni-Cd use only" . Rang the store and he says everyone uses NiMH on 'em with no problems. So what's the dope on this, guys? Do I have to use nicads now, or what? And while we're here, what about capacities?
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 367
Location: Morgan Hill, CA

PostPosted: Thu Nov 25, 2004 10:04 am    Post subject:  

I don't think it matters as long as you're not puting the limited volts through it.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Thu Nov 25, 2004 11:52 am    Post subject:  

Gezoid wrote:
Update:
Now, when I get home I notice on the box, "Ni-Cd use only" . Rang the store and he says everyone uses NiMH on 'em with no problems. So what's the dope on this, guys? Do I have to use nicads now, or what? And while we're here, what about capacities?


I think Futaba wants you to use NiCd because the digitals draw more current, and the NiCds can dump more power. Well, this USED to be true. But with the new cells nowadays, you can use anything you want really. I use LiIon in my stuff, and have used NiMh before, no problems.

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 85
Location: UK

PostPosted: Thu Nov 25, 2004 4:36 pm    Post subject:  

Aint it good to have people who know.

Thanks guys. Any advice on battery capacity while using these babies?

5 or 6 flights would be okay.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 866
Location: Fremont, CA

PostPosted: Thu Nov 25, 2004 9:03 pm    Post subject:  

Gezoid wrote:
Aint it good to have people who know.

Thanks guys. Any advice on battery capacity while using these babies?

5 or 6 flights would be okay.


Don't get anything less than 2000mah.

_________________
--Meyrick--
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 83
Location: UK

PostPosted: Fri Nov 26, 2004 3:39 am    Post subject:  

Got a 2300 mah NiMH, Sanyo cells, so I guess I'm okay with that. It's exactly the same size and weight as the old 500mah NiCad packs we used to use (4xAA's), boy they sure slipped into ancient history fast.

Next question is: these digitals use different wire than standard, probably because of the extra juice that's being drawn (duh!), so how about extension leads? Do these have to be a specific type for digi' servo's? Also the lead on this NiMH looks exactly like the usual stuff, shouldn't that be heavier duty too?

Sorry to be a pain with all these questions, but it needs to be cleared up.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 866
Location: Fremont, CA

PostPosted: Fri Nov 26, 2004 7:00 am    Post subject:  

Gezoid wrote:

Next question is: these digitals use different wire than standard, probably because of the extra juice that's being drawn (duh!), so how about extension leads? Do these have to be a specific type for digi' servo's? Also the lead on this NiMH looks exactly like the usual stuff, shouldn't that be heavier duty too?


Use Futaba or JR's HD extensions that have 22 gauge wires or you can get the Towerhobbies/Hobbico HD 20 gauge wires (I always use these). Use only 22 gauge wires or lesser number (20, 18, etc....).

_________________
--Meyrick--
Back to top  
Gezoid



Joined: 24 May 2004
Posts: 83
Location: UK

PostPosted: Fri Nov 26, 2004 7:43 am    Post subject:  

Thanks Meyrick, didn't even know there were heavy duty types. Rolling Eyes
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive