ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

I need help finding my first 3d plane.
8 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
JR.Master



Joined: 07 Nov 2004
Posts: 9
Location: San Angelo

PostPosted: Sun Nov 07, 2004 6:06 pm    Post subject: I need help finding my first 3d plane.  

I am looking for a 3d plane that is not to expensive but can use a 40cc gas engine for power and has a 2 piece wing. Anyone who has any suggestions I would be more than glad for answers. Smile Smile Smile Smile Smile Smile Smile Smile Smile Smile Smile Smile
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 226
Location: Morgan Hill, CA

PostPosted: Sun Nov 07, 2004 9:52 pm    Post subject:  

The Aerotech Velox.
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 650
Location: Fremont, CA

PostPosted: Sun Nov 07, 2004 9:53 pm    Post subject:  

Are you looking for a funfly type or scale aerobatics?
_________________
--Meyrick--
Back to top  
JR.Master



Joined: 07 Nov 2004
Posts: 9
Location: San Angelo

PostPosted: Mon Nov 08, 2004 5:44 pm    Post subject:  

I'm looking for scale aerobatics like 3d capable.
Back to top  
Flatlandmike



Joined: 29 Oct 2004
Posts: 17

PostPosted: Tue Nov 09, 2004 9:42 pm    Post subject:  

thats a tuff engine to find a good 3d plane for its a little on the small size for 28% planes and a little to big for any thing smaller imo you ll need to find all planes in the 13 to 15 pound areacloser to the 13 tho and try to decide from there
_________________
www.lmacky.org
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 587
Location: Sunnyvale, CA

PostPosted: Tue Nov 09, 2004 10:06 pm    Post subject:  

Yeah you might want to go with a ZDZ 50, or DA for that matter. I had a ZDZ 50 in my CA 27% Extra and it was good power. I think the DA would have been a bit more powerful (or so i hear). At any rate, the 50 CC in a 27% is a good combo. My plane was about 15 lbs.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 650
Location: Fremont, CA

PostPosted: Wed Nov 10, 2004 5:56 am    Post subject:  

www.giantscaleplanes.com 72" WS SA series might work.
http://www.giantscaleplanes.com/arf60.htm

_________________
--Meyrick--
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 226
Location: Morgan Hill, CA

PostPosted: Wed Nov 10, 2004 4:07 pm    Post subject:  

I had the giantscaleplanes Katana, and it had some awsome things to it. But from the quality of the ARF I would NEVER get one again. They would be good for IMAC, but for 3D the Katana needed a lot of work to do. I don't know anything about their other planes, but I would try to go towards something nicer.
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive