ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Setting expo's on a Funtana 90?
7 posts
 
   3DBatix Forum Index -> Gear Talk
 
Author Message
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Mon Sep 27, 2004 12:11 pm    Post subject: Setting expo's on a Funtana 90?  

I have never messed with expo's before!
I have a Eclipse 7,and the plane is a Funtana 90.
What is a good starting point for me to set the expo's?
Thx
Shaun
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Mon Sep 27, 2004 1:26 pm    Post subject: Re: Setting expo's on a Funtana 90?  

Shaun wrote:
I have never messed with expo's before!
I have a Eclipse 7,and the plane is a Funtana 90.
What is a good starting point for me to set the expo's?
Thx
Shaun


Shaun, a good starting point is around -30% all around and adjust from there.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 279
Location: Tacoma(area), WA

PostPosted: Mon Sep 27, 2004 4:43 pm    Post subject:  

On 3D rates I usually go about -30% on the ailerons and -50% to -60% on the tail.
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 676
Location: Sunnyvale, CA

PostPosted: Mon Sep 27, 2004 5:25 pm    Post subject:  

Youd better go -60% on ailerons if you have a lot of throw.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 212
Location: texas

PostPosted: Tue Sep 28, 2004 8:23 am    Post subject:  

Thanks all, I have 45deg on the elev, and 40deg on the rud!
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 193
Location: Jackson, MS

PostPosted: Tue Sep 28, 2004 9:32 am    Post subject:  

Shaun wrote:
Thanks all, I have 45deg on the elev, and 40deg on the rud!


Shaun, for my feel, I have -65% on up elevator and about -60% on down elevator and -75% on ailerons. I can't remember what is on the rudder, but is probably around -50% or more. I'm still getting use to the feel of the plane before I start making any more adjustments.

I have 45 degrees on elevator and 35% on ailerons. The rudder is 1/8" - 1/4" from hitting the elevators. My CG also is just shy of 7", but I am thinking about moving it aft to the recommended 7-1/8" later on.

The plane does ballon on landings. If you use flaperons it will come in better. I use spoilerons also to land in a harrier. I also need to get taller landing gear because my 16" prop keeps touching the grass (Stopping the engine). The plane IMO is too low to the ground, but it does look sleek.

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Kyle Woyshnis



Joined: 04 May 2004
Posts: 77

PostPosted: Tue Sep 28, 2004 2:08 pm    Post subject:  

I have an eclips 7 TX and these are my expo setting.

Elevator:30%
Aileron: 25%
Rudder: 10%

mine flies good with these settings and i am maxed out on throw.

_________________
Kyle Woyshnis

www.kyle.macapple.com
Back to top  
 
   3DBatix Forum Index -> Gear Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive