ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

My new Winter/Spring project
58 of 193 posts archived
 
   3DBatix Forum Index -> Workshop
 
Author Message
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Sep 24, 2004 9:29 pm    Post subject: My new Winter/Spring project  

38% CA Extra 300L and I decided to go with a DA150 this time... Haven't decided on muffs yet and plane is cans ready.


pic1.jpg
 Description:
38% Colombo Anderson Extra 300L
 Filesize:  56.62 KB
 Viewed:  2216 Time(s)

pic1.jpg



pic2.jpg
 Description:
DA-150
 Filesize:  69.12 KB
 Viewed:  2216 Time(s)

pic2.jpg



_________________
--Meyrick--


Last edited by Meyrick on Sun Nov 28, 2004 6:57 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Sep 24, 2004 9:39 pm    Post subject:  

Notice the NIB Funtana 90 behind the motor... That one will probably be built sometime in the Summer of 2005. :mrgreen:
_________________
--Meyrick--
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Sat Sep 25, 2004 4:17 am    Post subject:  

Man, that da150 is a work of art smile.
Keep us informed on the progression of the Extra!
Back to top  
-3de-



Joined: 25 Sep 2004
Posts: 81
Location: Reno----911

PostPosted: Sat Sep 25, 2004 8:33 pm    Post subject:  

Shaun wrote:
Man, that da150 is a work of art smile.


Man, I must agree..
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sun Sep 26, 2004 6:17 am    Post subject:  

Yeah, awesome motor and the throttle arm is setup with a ball swivel connector already installed.
_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Fri Oct 08, 2004 7:39 pm    Post subject:  

Wings have been drilled for Robart hinges and servo and servo rails have been routed out. This project is going pretty slow. :mrgreen:


wings.jpg
 Description:
 Filesize:  69.99 KB
 Viewed:  2100 Time(s)

wings.jpg



_________________
--Meyrick--
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 1178
Location: Sunnyvale, CA

PostPosted: Fri Oct 08, 2004 7:49 pm    Post subject:  

Awesome dude, glad to see you rotated the servos. The way they have them set up is pointless.
_________________
Zak West

www.DesertAircraft.com

www.Smart-Fly.com

www.DarrolCady.com

www.CoolRunningUSA.com

www.TanicPacks.com
Back to top  
Shaun



Joined: 10 Sep 2004
Posts: 342
Location: texas

PostPosted: Sat Oct 09, 2004 5:10 pm    Post subject:  

Keep the pictures coming Meyrick,
One of these days I'll want to step up to a larger plane.
I could use the schooling on larger scale planes!!! sly wink

_________________
http://www.texomarc.org/
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Fri Oct 29, 2004 5:28 pm    Post subject:  

Why was Zaks' 27% and Mericks CAs wing servos mounted sideways like that?
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Oct 30, 2004 10:49 pm    Post subject:  

Tom Uhlendorf wrote:
Why was Zaks' 27% and Mericks CAs wing servos mounted sideways like that?

What do you mean?

_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sat Oct 30, 2004 10:53 pm    Post subject:  

Moving slowly... :mrgreen:


elevator1.jpg
 Description:
Will be using a single 8611 per elevator halves.
 Filesize:  52.02 KB
 Viewed:  1980 Time(s)

elevator1.jpg



elevator2.jpg
 Description:
50 degree throw on the elevator.
 Filesize:  40.5 KB
 Viewed:  1980 Time(s)

elevator2.jpg



_________________
--Meyrick--
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Sun Oct 31, 2004 8:54 am    Post subject:  

It looks kinda odd. They look like you were ganna mount the sevos horizontally but, when you look at the foam where the wood has been cut away they look like your gonna mount them vertically. I think I saw Zaks with the servos mounted horizontally.


wings.jpg
 Description:
 Filesize:  61.63 KB
 Viewed:  1971 Time(s)

wings.jpg


Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sun Oct 31, 2004 9:14 am    Post subject:  

The horizontal markings were from the factory. I decided to go vertically.
_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Thu Nov 11, 2004 8:04 pm    Post subject:  

Wings covered with Monokote.


wing.jpg
 Description:
 Filesize:  99.89 KB
 Viewed:  1874 Time(s)

wing.jpg



_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Thu Nov 11, 2004 8:31 pm    Post subject:  

Tails covered and hinged. I used 11 Robarts per elevator cause there isn't enough wood back there. The phenolic tube socket was so far back and there is only about 1/2" balsa by the root of the stab and I had to cut the Robarts short. Elevators ain't going nowhere... :mrgreen:


tail.jpg
 Description:
 Filesize:  82.43 KB
 Viewed:  1869 Time(s)

tail.jpg



_________________
--Meyrick--
Back to top  
30 posts here were not archived
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 4:01 pm    Post subject:  

Firewall is reinforced. She ain't going nowhere!


1.jpg
 Description:
Firewall with 3/4" inch stainless steel screws and fiber on the sides.
 Filesize:  76.12 KB
 Viewed:  137 Time(s)

1.jpg



2.jpg
 Description:
3/8" bass wood epoxied inside the corners
 Filesize:  61.42 KB
 Viewed:  137 Time(s)

2.jpg



_________________
--Meyrick--
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 566
Location: Sunnyvale, CA

PostPosted: Sun Nov 28, 2004 5:14 pm    Post subject:  

Next time just use the epoxy as the square stock... Razz
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 5:24 pm    Post subject:  

3dbatixkid wrote:
Next time just use the epoxy as the square stock... Razz


Like my Sukhoi Mr. Green

_________________
--Meyrick--
Back to top  
Flatlandmike



Joined: 29 Oct 2004
Posts: 17

PostPosted: Sun Nov 28, 2004 5:30 pm    Post subject:  

was the fire wall not glued in to begin with
_________________
www.lmacky.org
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 187
Location: Morgan Hill, CA

PostPosted: Sun Nov 28, 2004 5:45 pm    Post subject:  

That looks really good Meyrick. Is that just 2-56 screws?
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 566
Location: Sunnyvale, CA

PostPosted: Sun Nov 28, 2004 5:50 pm    Post subject:  

Flatlandmike wrote:
was the fire wall not glued in to begin with


The firewalls are not installed in the CA arcs.

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 6:28 pm    Post subject:  

Tom Uhlendorf wrote:
That looks really good Meyrick. Is that just 2-56 screws?


They are tap screws but the same size as 4-40s. I have 10 of them screwed in. Firewall ain't going nowhere.

_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 6:47 pm    Post subject:  

8611 Case only. Used as an installation guide. $6 from Horizon.


8611case.jpg
 Description:
8611 Case
 Filesize:  89.71 KB
 Viewed:  109 Time(s)

8611case.jpg



_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 6:48 pm    Post subject:  

(5) 8-32 socket head screws to hold the gear. The gear will be painted Pearl White.


gear.jpg
 Description:
Gear
 Filesize:  70.08 KB
 Viewed:  107 Time(s)

gear.jpg



_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 6:49 pm    Post subject:  

RC Blimps Carbon Tail wheel.


tailwheel.jpg
 Description:
 Filesize:  69.49 KB
 Viewed:  105 Time(s)

tailwheel.jpg



_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 6:52 pm    Post subject:  

Each wing has three 1/4-20 nylon bolts epoxied 2" deep into the wing to a 1" thick balsa and held by 1/4-20 nylon thumb nuts in the fuse. Those wings are not going anywhere!


wings.jpg
 Description:
 Filesize:  85.91 KB
 Viewed:  104 Time(s)

wings.jpg



_________________
--Meyrick--
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 566
Location: Sunnyvale, CA

PostPosted: Sun Nov 28, 2004 7:20 pm    Post subject:  

you are overbuilding the SNOT outta that plane. Its gonna have 5 lbs of hardware on it!
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Sun Nov 28, 2004 7:55 pm    Post subject:  

3dbatixkid wrote:
you are overbuilding the SNOT outta that plane. Its gonna have 5 lbs of hardware on it!


Those are nylon bolts with balsa on the wings. Weights nothing. The only thing I overbuilt was the firewall but at least I feel secure about it. I estimated around 4oz of reinforcement that I added though out the whole fuse.

_________________
--Meyrick--
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 187
Location: Morgan Hill, CA

PostPosted: Sun Nov 28, 2004 8:11 pm    Post subject:  

You should be careful keeping those covered wings in foam like that. It could really scratch them up. But you won't have any dents. Rolling Eyes
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 580
Location: Fremont, CA

PostPosted: Tue Dec 14, 2004 9:25 pm    Post subject:  

Ok, I got lazy and went with an easier scheme than what I had planned. But it's a mirror finish.


pic1.jpg
 Description:
Wings covered.
 Filesize:  101.19 KB
 Viewed:  54 Time(s)

pic1.jpg



pic2.jpg
 Description:
Stabs covered.
 Filesize:  106.16 KB
 Viewed:  54 Time(s)

pic2.jpg



_________________
--Meyrick--
Back to top  
75 posts here were not archived
john wondra



Joined: 05 May 2004
Posts: 191
Location: auburn, wa

PostPosted: Thu Jan 27, 2005 12:58 am    Post subject:  

whats teh eta on that bad boy?
_________________
John Wondra RAMS VP
Team 3D Foamy
__________________________
www.3dfoamy.com
www.abellrc.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 939
Location: Fremont, CA

PostPosted: Thu Jan 27, 2005 9:58 am    Post subject:  

john wondra wrote:
whats teh eta on that bad boy?


I should be painting in three weeks so will probably Maiden this biatch in Mid March..

_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 939
Location: Fremont, CA

PostPosted: Mon Feb 07, 2005 11:33 pm    Post subject:  

I started covering the fuse...


1.jpg
 Description:
 Filesize:  108.26 KB
 Viewed:  204 Time(s)

1.jpg



2.jpg
 Description:
 Filesize:  90.52 KB
 Viewed:  204 Time(s)

2.jpg



_________________
--Meyrick--
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 484
Location: Belvidere, NJ

PostPosted: Tue Feb 08, 2005 6:06 am    Post subject:  

that looks nicee! Cool do you think u'll have smoke in it?
_________________
"uhhhhhhhhh......Whoah! (uhuhuhhhuhh) I think I just figured something out...... this sucks!"
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 939
Location: Fremont, CA

PostPosted: Tue Feb 08, 2005 7:23 am    Post subject:  

TeamMoki3D wrote:
that looks nicee! Cool do you think u'll have smoke in it?


Probably not right away.

_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 205
Location: Jackson, MS

PostPosted: Tue Feb 08, 2005 8:22 am    Post subject:  

Looking very good Meyrick. Can't wait for the video as I know you will have one. Smile
_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 939
Location: Fremont, CA

PostPosted: Tue Feb 08, 2005 9:06 am    Post subject:  

DTB wrote:
Looking very good Meyrick. Can't wait for the video as I know you will have one. Smile


It will be a very boring video as I only plan to fly her in precision for now. I can't risk of losing her doing 3D in 2005. Mr. Green

_________________
--Meyrick--
Back to top  
Chris



Joined: 16 Apr 2004
Posts: 288
Location: Toronto, Canada

PostPosted: Tue Feb 08, 2005 1:07 pm    Post subject:  

sure you can Wink
_________________
-Chris-
3D Foamy
Back to top  
Radioflyer



Joined: 14 Sep 2004
Posts: 122
Location: Kalamazoo, MI

PostPosted: Tue Feb 08, 2005 1:39 pm    Post subject:  

HEY MEYRICK, lOOKS SWEET Cool
_________________
God bless us all, and keep us safe.
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 704
Location: Sunnyvale, CA

PostPosted: Tue Feb 08, 2005 10:04 pm    Post subject:  

Meyrick wrote:
DTB wrote:
Looking very good Meyrick. Can't wait for the video as I know you will have one. Smile


It will be a very boring video as I only plan to fly her in precision for now. I can't risk of losing her doing 3D in 2005. Mr. Green


Chicken... Razz

_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
john wondra



Joined: 05 May 2004
Posts: 191
Location: auburn, wa

PostPosted: Wed Feb 09, 2005 2:01 pm    Post subject:  

indeed...... Evil or Very Mad
_________________
John Wondra RAMS VP
Team 3D Foamy
__________________________
www.3dfoamy.com
www.abellrc.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 939
Location: Fremont, CA

PostPosted: Wed Feb 09, 2005 2:04 pm    Post subject:  

I don't wanna end up like ZAK, loosing a plane a week before the most important contest of the year. Wink
_________________
--Meyrick--
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 939
Location: Fremont, CA

PostPosted: Wed Feb 09, 2005 11:51 pm    Post subject:  

More Updates. Fuse is getting dressed up.


1.jpg
 Description:
Almost done with the fuse.
 Filesize:  96.81 KB
 Viewed:  98 Time(s)

1.jpg



3.jpg
 Description:
Throttle servo and choke servo mounted.
 Filesize:  90.21 KB
 Viewed:  98 Time(s)

3.jpg



_________________
--Meyrick--
Back to top  
DTB



Joined: 24 Jul 2004
Posts: 205
Location: Jackson, MS

PostPosted: Thu Feb 10, 2005 3:53 am    Post subject:  

Poor Funtana S 90... Very Happy

The Extra is looking better and better with every post...

_________________
Fly it hard and hover it low...

My RC Photo Page
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 939
Location: Fremont, CA

PostPosted: Thu Feb 10, 2005 6:19 am    Post subject:  

DTB wrote:
Poor Funtana S 90... Very Happy


Funtana has been sitting in that box for 7 months now. Mr. Green

_________________
--Meyrick--
Back to top  
30 posts here were not archived
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 20, 2005 5:30 pm    Post subject:  

niccccccccceeeeee Cool Cool Cool Cool Cool Cool Cool get a video or somehtin of that biatch laughing Cool Razz
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
john wondra



Joined: 05 May 2004
Posts: 360
Location: auburn, wa

PostPosted: Sun Feb 20, 2005 7:24 pm    Post subject:  

congradulations meyrick glad shes all you expected and more! great job with the build too.
_________________
John Wondra RAMS VP
Team 3D Foamy/3D Foamy Suport
__________________________
www.3dfoamy.com
www.northwest3d.com
www.e-flightline.com
www.Falconbatteries.com
www.cutimages.com <all your custom vinyl needs>
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 20, 2005 7:32 pm    Post subject:  

yeah, what he said. great job Meyrick! big grin
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Butthead



Joined: 08 Oct 2004
Posts: 1054
Location: Belvidere, NJ

PostPosted: Sun Feb 20, 2005 7:44 pm    Post subject:  

you should add some of your pics of this baby to the photos page Idea Idea
_________________
John Paragallo

WildHare RC Extra 330LX 36%/ZDZ 120

Hangar-9 Extra 260 27%/ZDZ 50

Futaba 9C
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Mon Feb 21, 2005 12:07 am    Post subject:  

Thanks guys, I'm freaking STOKED.. I can't believe how much easier the 1-1/4 and 1-1/2 snaps were compared to my 33%. And that DA150 was just setup dead on from the factory, very impressive motor.
_________________
--Meyrick--
Back to top  
3D-kid330



Joined: 14 Nov 2004
Posts: 391
Location: Fremont, CA

PostPosted: Mon Feb 21, 2005 7:28 pm    Post subject:  

Awesome! Shocked Any 3D video of it?
_________________
Lower??!!


Last edited by 3D-kid330 on Fri Feb 25, 2005 9:36 pm; edited 1 time in total
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Mon Feb 21, 2005 9:30 pm    Post subject:  

3D-kid330 wrote:
Awesome! Shocked Any 3D video of it?


Hehehe, not anytime soon. :mrgreen: I will make one with my 33% though.

_________________
--Meyrick--
Back to top  
Robert300L



Joined: 17 Apr 2004
Posts: 134
Location: San Diego, CA

PostPosted: Tue Feb 22, 2005 11:05 pm    Post subject:  

Paint the cowl and pants before it ends up like my 34% Razz

( http://3dbatix.com/forum/viewtopic.php?t=344&postdays=0&postorder=asc&start=15 )
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Tue Feb 22, 2005 11:16 pm    Post subject:  

Robert300L wrote:
Paint the cowl and pants before it ends up like my 34% Razz

( http://3dbatix.com/forum/viewtopic.php?t=344&postdays=0&postorder=asc&start=15 )


Man, that sucks Rob. Did you ever find the crystal?

Yeah, my parts are hanging right now, paint drying. Hope to shoot the clear on Saturday morning.

_________________
--Meyrick--
Back to top  
Robert300L



Joined: 17 Apr 2004
Posts: 134
Location: San Diego, CA

PostPosted: Thu Feb 24, 2005 9:41 am    Post subject:  

Didn't bother looking for it, the plane kinda shredded into some trees and landed in a big mud pit of TJ water.. batteries smelled funky for 2 days Razz Also, we had to get the sawzall and tie the jeep to a tree and pull it down to get one of my aileron servos.. t'was quite fun!
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Sun Feb 27, 2005 4:27 pm    Post subject:  

Cowl and Landing Gear painted.


cowl2.jpg
 Description:
 Filesize:  59.73 KB
 Viewed:  230 Time(s)

cowl2.jpg



caextra2.jpg
 Description:
 Filesize:  82.01 KB
 Viewed:  230 Time(s)

caextra2.jpg



_________________
--Meyrick--
Back to top  
Tom Uhlendorf



Joined: 18 Sep 2004
Posts: 563
Location: Morgan Hill, CA

PostPosted: Mon Mar 21, 2005 8:43 pm    Post subject:  

Are you going to get a video of it? smile
Back to top  
Meyrick
Site Admin


Joined: 15 Apr 2004
Posts: 1316
Location: Fremont, CA

PostPosted: Mon Mar 21, 2005 8:47 pm    Post subject:  

Tom Uhlendorf wrote:
Are you going to get a video of it? smile


Not for a while. She's my only IMAC plane and can't risk of loosing her. laughing

_________________
--Meyrick--
Back to top  
 
   3DBatix Forum Index -> Workshop All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive