| |
| Author |
Message |
Tyler
Joined: 26 Jun 2007 Posts: 4
|
Posted: Tue Jun 26, 2007 2:03 pm Post subject: 3Dbatix Extra 330 plans |
|
|
| I was wondering if anyone else is having trouble with the tilled plan version lines not matching up. Alot of the lines when I put the plans together are way off. Is their somethig I should be doing. I have printed other plans off the net and haven't had this problem.I don't have a printing place close by or I would have just had a full size made up.I also had to add extra length to wings and fuselage to get them the right lengths. Thanks Tyler |
|
| Back to top |
|
 |
Tyler
Joined: 26 Jun 2007 Posts: 4
|
Posted: Tue Jun 26, 2007 7:28 pm Post subject: I don't need help now |
|
|
| I just drove 50 miles to a kinkos and had them print a full size sheet. |
|
| Back to top |
|
 |
norio79
Joined: 08 Jun 2007 Posts: 2 Location: San Jose
|
Posted: Thu Jun 28, 2007 9:50 am Post subject: Printing tiled plans |
|
|
I had that problem with the Diablo 3D plans.
After cutting the margins so the lines would match up and sticking all the tiles together the plans came up a few inches smaller in all dimensions. I went to Kinko's which was luckily near by and printed a full size set for $9. I ended up cutting the plans anyway to make each section so the full size plans felt like a waste of money.
On my 2nd Diablo I fiddled with the printer and found that each tiled page was being automatically shrunk to fit in the margins. To fix - When you click print and the printing options pop up, under Print Handling select "none" or under Copies and Adjustments uncheck the "shrink" and "expand" boxes if they are checked. I hope this fixes your problem if you make another plane.
You should get blank gaps between the plan lines after taping the pages together but you can draw them in freehand. |
|
| Back to top |
|
 |
| |