ARCHIVED FORUM (READ-ONLY)  ·  about this archive
3DBatix Forum Index

Extreme Flight Yak, the kind of ARF we've always wanted.
7 posts
 
   3DBatix Forum Index -> 3D Talk
 
Author Message
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 19

PostPosted: Fri Aug 06, 2004 6:35 pm    Post subject: Extreme Flight Yak, the kind of ARF we've always wanted.  

My new 68" Yak-54 from Extreme Flight came in today. This is by far the highest quality ARF I have seen to date, both in build and included hardware. It is also very light. Here are weights on separate components:
Part Description Weight Qty. Oz Lb
R wing panel 10 1 10 0.625
L wing panel 10.7 1 10.7 0.66875
wing tube 1.4 1 1.4 0.0875
Horizontal tail 4.3 1 4.3 0.26875
rudder 1.6 1 1.6 0.1
cowling 6 1 6 0.375
fuse 25.2 1 25.2 1.575
wheelpants 0.8 2 1.6 0.1
canopy 5.7 1 5.7 0.35625
Landing gear 4 1 4 0.25


0 0
Total: 4.40625
The entire airframe, including wheel pants, landing gear, and cowling and wing tube comes in at 4.4 lbs Cool Awesome. The wings, ailerons, fuse and canopy come in at 3.225 lbs, which is over 5 ounces lighter than the same parts on the Funtana 90.

It will add more details and photos as I build and fly the Yak. Here are some strong points about the airplane:
Leading edges sanded perfectly.
Canopy assembled, mounted, and painted.
Perfect hatch fit.
Airfoiled tail surfaces.
No wrinkles in covering.
Motor box is covered.
Built strait as an arrow.
Carbon wing tube Wink
Composite landing gear Cool
Du-Bro hardware Razz
Landing gear block reinforced to fuse side with angle aluminum.

Read the review at:
http://www.rcuniverse.com/magazine/article_display.cfm?article_id=353

Well bummer, my pics won't upload, I'll try the pics again later.

BTW - The cowing is 25.5" in circumference. Plenty or room for any engine, but a lot or drag?



HW and fuse bottom.JPG
 Description:
Du-Bro hardware and composite tube and LG!!!
 Filesize:  67.51 KB
 Viewed:  344 Time(s)

HW and fuse bottom.JPG



_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
3dbatixkid
Moderator


Joined: 15 Apr 2004
Posts: 625
Location: Sunnyvale, CA

PostPosted: Fri Aug 06, 2004 7:24 pm    Post subject:  

looks awesome man. how about some pictures of the inside.
_________________
Zak West
Team DA

Desert Aircraft

Smart Fly

Fromeco Avionics

Stick and Rudder Photos
Back to top  
3Dfanatic



Joined: 15 Apr 2004
Posts: 272
Location: Tacoma(area), WA

PostPosted: Fri Aug 06, 2004 8:36 pm    Post subject:  

Sounds cool!
_________________
-Aaron

cutimages.com
offthewallrc.com
Back to top  
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 19

PostPosted: Sun Aug 08, 2004 7:41 pm    Post subject:  

Well I'm motivated to get the Yak in the air because I stuffed my Funtana today. I did it during IMAC freestyle competition of all the wrong places to crash! I would make excuses why I crashed, but as the saying goes, 'people who are good at making excuses are good for nothing else'.

Ok I will add a bunch of Yak pics, but I can't figure out how to add more than one picture to a post. I'll find out how on the correct thread, and then you will have plenty of Yak pics.

BTW - Will my Saito 100 be enough for an 8 lb 2 oz Yak? I'll use a 14x8 APC for IMAC and a 16x4W, 15x4W, or 15x6 for 3D. 30% nitro of course.



8-8-04, Funtana stuffed 600p.JPG
 Description:
Do I really want to take this thing home?
 Filesize:  69.75 KB
 Viewed:  304 Time(s)

8-8-04, Funtana stuffed 600p.JPG



_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
Balsa+Nitro



Joined: 21 Jul 2004
Posts: 19

PostPosted: Mon Aug 09, 2004 4:17 pm    Post subject:  

I still can't add more that one pic per post.


cowl and motor box.JPG
 Description:
cowl and motor box
 Filesize:  39.07 KB
 Viewed:  286 Time(s)

cowl and motor box.JPG



_________________
"...The only thing that counts is faith expressing itself through love." Galatians 5:6
Back to top  
DiabloKid



Joined: 20 Sep 2004
Posts: 11
Location: Washington DC

PostPosted: Mon Sep 20, 2004 7:26 am    Post subject:  

Balsa+Nitro wrote:

BTW - Will my Saito 100 be enough for an 8 lb 2 oz Yak? I'll use a 14x8 APC for IMAC and a 16x4W, 15x4W, or 15x6 for 3D. 30% nitro of course.


from all indications the 100 will fly but for max performance I have read the YS 1.10 will do it justice. I am contemplating one myself for a winter project with the YS 1.10. Price might come to play so I might have to settle for the H9 Funtana. We will see..

good luck with yours

matt

_________________
www.HideinMy.com
Back to top  
CHIPWILLIS



Joined: 22 Sep 2004
Posts: 1
Location: Columbus, Ohio

PostPosted: Wed Sep 22, 2004 12:38 pm    Post subject: Imac Newbie and the Yak  

I have the Yak 54 and Saito 100. This combination kicks butt with ZERO wind and 30 percent fuel. Shocked

Anything more than that and forget it for IMAC. The things I didnt particularly like were being bounced around in the wind, and the Saito isnt quite strong enough to give good vertical lines. I have a Lanier 73 inch Edge 540 that tracks much better for IMAC work.

Now, I do praise the Yak for 3 D style work, and I would love to fly it freestyle ( I am not that good on the sticks yet ). The plane is pretty awesome, and it does some of the coolest inverted flat spins and elevators.


I am wondering how the 87inch Gasser will fly IMAC and wonder will the wing loading be "TOO" light. I hear people say all the time that lighter is better but in wind I think there is a lower limit. If I had a bigger engine in the yak, then it would pull better but I think it might still get tossed more than a heavier plane.

Just some thoughts. Any ideas? I am no expert and trying to figure a good next plane for IMAC.

Chip
Back to top  
 
   3DBatix Forum Index -> 3D Talk All times are GMT - 8 Hours

Powered by phpBB 2.0.6 © 2001, 2002 phpBB Group

blueGray theme by Nuttzy
Restored from the Internet Archive, 2026 · about this archive